Adobe Target

I want to create a "most popular in your favourite brand" recommendation, which with the new update it should be through the "Popularity-based" recs.  What does the field "Profile Attribute to Match" do on the new "Popularity based" recommendations?    Not sure why Adobe released an update without also making a proper documentation at the same time. Currently the documentation says "(Info coming soon)" for Top Sellers by Item Attribute and Top Sellers by Item Attribute and Most Viewed by Item Attribute.   https://experienceleague.adobe.com/docs/target/using/recommendations/criteria/base-the-recommendation-on-a-recommendation-key.html?lang=en

There's a few test scenarios where I don't want the user to be entered into a test unless they see the actual treatment.  For example. 50/50 split test in the cart. I want to show an exit intent modal to half the audience.  Is there a way to only allow the user to be entered into the test if they have an exit intent (move cursor to close)? 

Case: Let's assume there is a significant lead time from a conversion on the web until activation of a service actually happens. After activation and as a part of the onboarding process for the service you want to not only use triggered emails/texts, but also expose the visitors for relevant content online (the full omni experience and all that).    Any smart feature in Target that will start exposing users n days after they qualified for the base segment? Yes; I think (in theory) its possible to use recency on the trait(s) within the segment e.g. has qualified for the trait equal to or more than one time in "recency > n" days to obtain this, but any built-in feature would be preferrable.

Our Adobe Digital Experience Communities are the heartbeat that connect, engage and empower our users to create game-changing digital experiences leveraging Adobe solutions.  The Employee Advisor program is designed to recognize our most engaged, passionate, and supportive Adobe employees who go above and beyond in the Experience league product communities. Employee Advisors will mentor, encourage, and facilitate Community participation, share their product expertise, knowledge, and reinforce the Communities as the primary peer-to-peer resource for Experience Cloud customers.     If you are interested to be a Employe Advisor, Please complete the Employee Advisor Interest Form before Friday, 22nd October. This program is specifically for Adobe Employees. To be considered for the program, you must meet these qualifications: Achieve Level 6 in Experience League Communities (including Marketo Engage and Adobe Commerce communities). Have subjec

This month, Adobe Target released four awesome new features: * A new Audience creation UI built on Adobe React Spectrum that unlocks new ways to combine and configure real-time audiences from across Adobe Experience Cloud and Adobe Experience Platform* A new Profile Scripts UI built on Adobe React Spectrum that introduces bulk actions, color code validation, and token hints for dynamic profile attributes* Faster Recommendations Algorithm Runs (3-6 hours compute) and shorter Lookback windows (6 hours data) for popularity based Recommendations (most viewed, top sellers) - improved from 24 hours*A new Recommendations Algorithm (criteria) configurator that makes previously-hidden options like Most Viewed by Item Attribute, Top by Analytics Metric, etc. easier to find and utilizeAnd we aren't done. Expect more product releases before the end of 2021! 🎉 Check out the product release notes here for more exciting details!

I'm trying to serve "Recently Viewed Items"  but I want the experience to cleanly fail over to Site Wide Top Sellers if there isn't any recently viewed items data for the visitor. If I build a regular criteria chain it'll populate the first items from Recently Viewed and then backfill the remainder of the set with Top Sellers. Not looking for that, need it to serve one or the other. Potential (not great) solutions I'm considering;Call them both separately hidden, test if Recently Viewed populated and reveal it with JavaScript. It's inelegant and adds unnecessary content to the page but would work.Set a user.param on product view and then test for it with a profile script. Would also likely work but this feels like I'm re-building something that already exists and I'm worried the expiration on the param wouldn't match up with the internal expiration on Recently Viewed maybe? I'm hoping there's something simpler I'm overlooking, if not then I'll use one of the above ideas

We are running a pricing test in which we redirect the visitor to the same page with some URL parameters attached.  For example, they navigate to example.com.  Target then sends 50% of the visitors to example.com/?partnerid=1234 so the visitor gets a price reduction.  So there are a couple of issues.  Analytics fires twice because of the redirection to the same pageDiscounted price doesn't persist thru multiple sessionsSo the visitor could see the test price in the first session but see the default price in the second sessionAny suggestions?

The context:I have two user groups(beta1 and beta2) in AEM. When a user logs into the website, I capture whether they are in the beta1 or beta2 groups in a JS variable that is placed just before the launch script, so that when the delivery request is sent, I can utilize this value as a profile parameter for targeting. The following is the launch rule: Where the custom code is:  function targetPageParams() { var group = userGroup; //userGroup variable is set to beta1/beta2 just before the launch script return "profile.userGroup="+group; }   The issue:1. The profile parameters are not sent to the target on the very first page load. Target is giving the default experience since the request field for the profile parameters is empty. I tried replacing the custom code with a hardcoded value along but got the same result. The profile parameters are not being sent as anticipated when the user logs into the website for the first time/incognito.Tried a con

Can anyone guide me on, "how to trigger orderConfirmPage mbox manually through postman?"Or is there any way to trigger orderConfirmPage mbox without postman if it's not possible through postman?Thanks,Gauresh Kodag.

We recently moved to server side rendering and it seems that enabling and disabling feature flags via Target is no longer a viable option.  Is there documentation about best practices on Target and SSR?  Our most meaningful tests have always required feature flags as they are not simply picture changes.  Any guidance would be helpful.

Hi,  (Context) I'm trying to create a banner at the top of my homepage for people who was about to check out a product but didn't finish the purchase. First I tried the banner specifically with 1 product and worked very good, but know i'm trying to add another product, but i would like to show only one banner (1 product or the other, not both of them).  (Problem) I had created 2 different experiments in Target with the banner at the same position, but visitors sees 2 banners instead of one (I would like to configure the way that the banner shows the last product seen). So: 1. What should I do in order to show only 1 banner.2. How could I show the last product view in the banner? Thanks a lot

Hello Community, I'm having trouble getting the geo-targeting rule to work. I thought it was an out-of-the-box solution. Am I wrong? I simply want to set the geo-location for Australia, New Zealand, or United States. To verify I'm using mboxOverride.browserIp and getting IP's by country: https://lite.ip2location.com/ip-address-ranges-by-country but the activity is not loading in the browser. On the other hand, when I use the default All Visitors audience everything works. I created an audience with the following rules...see attached. 

Are there any official docs on best practices in integrating the Adobe Target api's (https://developers.adobetarget.com/api/legacy-api/index.html) or (https://developers.adobetarget.com/api/) into a .NET MVC project?For example is there a .net sdk for integrating with the API or any guidelines on handling consent management?

We have uploaded data into Customer Attributes and have subscribed the attributes to Adobe Target. When I fetch the Target profile using the third party ID I can see the attributes. However, when I use the ECID only to retrieve back the profile data it does not include these attributes. Why is this? If I lookup the ID in customer attributes I can see that the ECID is paired. ThanksNick   

Hi, We have implemented Adobe Target recs on the mobile app in UAT and we are using the following approach right now:One global mbox to capture all entity attributes on all PDP (e.g. entity.id, entity.price, entity.thumbnailURL, etc.)Another custom mboxes for respective recs activities with one mandatory mbox param which is entity.id.Right now all the recs activities are running on PDPs and it's working fine.But, today we tried to set up recently viewed on the Home page and we are not getting any response on it even though the algorithm is ready. is it because we are fetching all entity attributes in one mbox and trying to fetch results in another? What we are thinking to do now is fire recently viewed mbox on all PDPs with entity.id mbox param and then we might get a response. Can you please suggest to us the best-optimized approach to go ahead? your suggestions would help us a lot in optimizing the use of target in the best way possible Th

Hello :), I have an A/B/C test running. A version: redirect to a page in my domainB version: landingspage with Experience FragmentsC verion: same landingspage with different Experience Fragments The audience split is even: 34% - 33% - 33%. But unfortunately the actual split isn't even. I have more visitors on the B and C experiences.  Can someone explain me what i do wrong? Thank you in advance. Kind regards,Ewoud

Version: at-v2.2.0.jsCan someone provide a little insight as to what this error means? I am not getting an actual error message other than status: error and in the errors array, I am just seeing the offer that I am calling getOffer on, via the api. The offer is applied too, so I am not sure why this is erroring. Could it be a bug? Please see screenshot:

Today #AdobeTarget  released four awesome new features that you are sure to love.* A new Audience creation UI built on Adobe React Spectrum that unlocks new ways to combine and configure real-time audiences from across Adobe Experience Cloud and Adobe Experience Platform.  This feature is available in the Europe region only and will be made available to other regions next week. * A new Profile Scripts UI built on Adobe React Spectrum that introduces bulk actions, color code validation, and token hints for dynamic profile attributes.  This feature is available in the Europe region only and will be made available to other regions next week. * Faster Recommendations Algorithm Runs (3-6 hours compute) and shorter Lookback windows (6 hours data) for popularity based Recommendations (most viewed, top sellers) - improved from 24 hours*A new Recommendations Algorithm (criteria) configurator that makes previously-hidden options like Most Viewed by It

Could you please tell me how to set up an audience to target users within a 20 mile radius using longitude/latitude? Examples:Moshi, Tanzania -3.324647, 37.318282ISTANBUL KUCUKCEKMECE TURKEY 41.038752, 28.782118Campinas Brazil -22.894054, -47.002443Brooklyn, NY zip 11225 What are the pros/cons of targeting in the above international countries based on zip code alone? How accurate is that? Thank you, Kristie DesousaCollege Board

Hey folks,           We are getting lot queries for connecting dots between different components of AEP to have complete experience. We are starting #FridayFinding with Platform Experience which will cover concepts and golden nuggets. Every Friday a topic would be released, and the thread would be moderated by experts @karandhawan @ankita_sodhi @ankitbhatt @skand  who would be answering the queries on thread. Way of Working for FridayFinding Each #Fridayfinding would cover a topic as What will we do? Perquisites, steps, and outcome. Connect what we just did to why we did. This part would explain what we did in previous step would connect in real life. Before we dive into world of Platform Experience next Friday onwards, consider setting environment by having instances and licenses handy to grow together. Access to Adobe Experience Platform: https://experience.adobe.com/platform Access to

I would like to run a test to specifically target "direct traffic" meaning visitors who have typed in the URL directly or have the URL bookmarked. Is there a way to do this?

Hello guys, Assuming that I have three different environments (DEV, UAT and PROD), how many activity shall i create if I have HTML delivery?Thanks