Campaign Standard

Adobe campaign: reporting function of adobe campaign standard is not working.

Hi, getting this error when trying to publish an events transactional message, what is this workflow and can it be triggered manually? DLV-490142 Events were previously received but not processed and need to be cleaned up. You must wait for the daily cleanup workflow to run.   

Hi, We have previously set SMTP headers to support list-unsubscribe. For example: Precedence: bulkList-Unsubscribe:<mailto:bounce@123.xx?subject=unsubscribe<%=escape(context.mimeMessageId) %>>List-Unsubscribe-Post: List-Unsubscribe=One-Click Now I saw about modifying SMTP parameters could break the OOTB One-Click List-Unsubscribe: https://experienceleague.adobe.com/en/docs/campaign-standard/using/administrating/configuring-channels/configuring-email-channel#list-of-email-smtp-parameters  So my question is how to set the SMTP headers to be compliant with the One-Click List-Unsubscribe requirement from Google and Yahoo!?  

Hi Community,I have created a landing page which will be active throughout the campaign period. The promotional date for the customer who subscribes through the LP is from the 1st of the month till last date of the month. The same customer cannot subscribe to the service after the promotional period ends even by clicking on the old email which has the LP link. How to disable the LP link once it has been used without expiring the entire landing page? The customer should be able to use the link only once in 3 months. 

Hi Community,My requirements is to send the campaign start and end date (promotional period) to be used in transactional message. The event is linked to service subscription and when the customer subscribes to the service, they get the confirmation email. I am able to populate the fields from the Profile schema, but am not able to figure out a way to send the enriched custom fields to the event trigger definition. Is there any workaround possible? Thanks!

The current expression is ending the workflow at 7pm but we need it to continue to run until 10:50. This is the function we are using in a test activity.  What is weird is in one workflow this same formula runs until after 11 while in another it ends at 7pm.Iif((Hour(GetDate()) > 6 AND Hour(GetDate()) <23), 1, Iif(((Hour(GetDate()) == 6 AND Minute(GetDate()) >= 30) OR (Hour(GetDate()) == 22 AND Minute(GetDate()) <= 50)), 1, 0))

Hi All, Is it possible to pass ACS report data's "Tracking URL" to Adobe Analytics? p

Hello everyone!I'm using below as a condition in my test activity:Hour(GetDate())>13Does anyone have any idea why this condition doesn't work correctly?I checked and when for example using enrichment with this function and I can see the data is populated correctly.But for some reason this test is giving me wrong results. I'm extremely confused about it, it this some Adobe bug?

Hello, I would like to know if any of you could provide some helpful examples of how to use an external signal. I really want to make sure I'm maximizing the potential of adobe campaign and judging by the name this looks like it can be useful. Would the following be possible on adobe campaign?- right now we have a workflow on a scheduler that will send a verification email to a new subscriber, and that triggers every 2 minutes. is it possible to have that triggered based using the external signal instead of having a timer run every 2 minutes? Thank you!

Hello Community, We created a transactional email with an image with a link (type "external link) without problems, but now we try to modify it  to add a new url and the "Save" button is not enabled. Why can it be?  Thanks 

We use Adobe Analytics to report on website conversions/revenue. We currently pass ACS data for delivered, opens, and clicks and we are able to break-out by the campaign label or delivery label. We'd like to be able to see reports in AA broke out by audience segments but is there a way to relate this data? ie - could we add a variable tracking tag to URLs? Or is there a way to create a report based on custom profile attributes that could integrate with Adobe Analytics?

Hello All, I am using delivery templates inside Workflow as recurring delivery. I would like to get details from delivery log or broadlog or  any other way, where i can fetch source delivery template name and export to destination system? is their any way where i can fetch from which delivery template email delivery was created?

Hi All,Apologies if this question was asked before but I could not find any entry related this issue.In ACS, we have been using 11 languages and all the profiles that have been created by forms submissions (data coming through Azure) have correct preferredLanguage values so far. Recently we added another language to the forms (incl. default subscription form), however, in all tests that we performed, the preferredLanguage falls to default value (only for the new language, previous 11 ones still matches correctly). I'm not able to see the value coming from Azure but my colleagues checked and I was told that the value that are sent to ACS is correct.I checked the data schemas for the campaigns and default subscription and everything looks fine. I added AC_Language fields and republished the events but didn't make any difference.Could you share your ideas about the possible issues and how to solve it?ThanksKind regards,Karaca

Hi all, Im working on a project setting up SMS on an ACS instance and wanted some input on the kind of typology rules one should consider for both marketing and service SMS' Any input would be much appreciated. Thanks,AJ

I am wanting to remove single use audiences from the platform with a workflow.

Hi AllI am working on transactional messages in ACS, and trying to add a mirror page url to the message but as the marketing email mirror page link has data from profile table and transactional messages gets data from rtevent it shows error.Let me know how can we make a mirror page url and link for transactional messages in acs

Hi all! Is there a way to automatically redirect users to the confirmation page of a landing page if they have already used it to subscribe to a service previously? Thanks,AJ

I have a query resulting in multiple lines that I need to display in an email to then send it to the rcpManager which is the profile I need to send the email to. facilityIdNameAddr1Addr2EmailPhonemanagerCodercpManager123Joe's GarageLoremDolorjoe@garage.com123455manager@adobe.com456Car ExpressIpsumSit Ametcar@express.com67785manager@adobe.com Now, I need to display these in an email using a loop, but it doesnt seem to work for me?     <% for (var i =0;i<=context.targetData.length;i++) { %> <!---somehtml tables and columns here---> <%= context.targetData[i].facilityId%> </span> <%= context.targetData[i].name%> </span> <%= context.targetData[i].Addr1%> </span> <%}%>   If I try to get the length of targetData it comes back as undefined`<%= context.targetData.length %>` --> undefined If I get the length of facilityId its fine.so how do I iterate through all the

Hello! I would like your help to understand this function correctly, please: @eventDate > = Days Ago (6) AND @eventDate < Days Ago (5) I want to filter only those who received an email 6 days ago, the first part of the condition wouldn't be enough? The @eventDate < Days Ago (5) would be a security way to guarantee that only users from six days ago will be filtered? Like, six days ago and no number lower than five days?  Thank you in advance!Thais

Hello! Earlier I was checking some Welcome workflows and realized that some of them are with cusWelcomeTemplateBlock in the email content, so I cannot see the email design but can see it by sending an email test. What is the function of this and why is it normally used?  Thank you in advance 🙂Thais

Hi All,Environment:Adobe Campaign V6.1 [Hybrid on premise Marketing server] Adobe Campaign Build Number 8861IIS Server 8.5Problem:After configuring the web server as per the instructions in the documentation, when I hit the page http://localhost/nl/jsp/logon.jsp I get a 404 error, but when i hit http://localhost:8080/nl/jsp/logon.jsp the page loads without any error.Please let me know, if am missing something.I have followed the instructions to configure IIS web server with Adobe Campaign V6.1Integration into a Web server I did execute the VB script, But I could not see the webmdl listed when I performed a pdump as shown below.PS C:\Users\Administrator> nlserver pdump17:59:04 >   Application server for Adobe Campaign (6.1.1 build 8861) of 10/19/2017watchdog (5008) - 10.8 MBsyslogd@default (3100) - 12.2 MBwfserver@sitMarketing (704) - 37.2 MBweb@default (2776) - 292.4 MBI can see the application folders in content view in IIS.My IIS Server Regards,Mano

Does anyone know if it is possible to add either Workflow ID or Workflow Label into additional data of a query?

Hello, We are looking to implement a survey for a specific campaign and exploring how to build it in ACS using the landing page capabilities.The survey is very simple - couple of questions, checkboxes (yes/no).The complexity is we don't want to save the answers in the profile table. And is likely to be duplicated to be used across the year (cohorts approach) - but I guess this could be done by creating services linked to the landing pages. Any thoughts on the best approach or how to save the information in a different table that the profile table? Thank you

I want to add conditions to display certain text based on if a workflow target field is 0 or 1, how can I perform this directly in the html code rather than going through the native feaure which adds a lot of junk.For the following line item, i want to just display the character code ☑ if a boolean condition is true.<li><span style="font-size: 18px;">☑ 1 year Member </span></li> When I apply Dynamic Text, look at all the junk thats added<li><span style="font-size: 18px;"><span id="171152985185690" class="nl-dce-multiconditional nl-dce-if nl-dce-variant nl-dce-variant-text nl-dce-current-variant" data-nl-condition-type="multiple_text" data-nl-variant-group="171152985186532" data-nl-expr="/*@nlLabel isMember*/(context.targetData.isMember=== true)" data-nl-variant-index="1" data-nl-variant-desc="isMember">☑</span><span id="171152985185690" class="nl-dce-multiconditional nl-dce-if nl-dce-variant nl-dce-variant-text" data-nl-

I want to get the total counts of records (preferably in a variable) coming out from an enrichment activity (let's call it enrichment A) which I then want to use in my subsequent activities downstream ( let's call it enrichment B) . In my enrichment B activity I actually use a case / iif with this variable. The problem is count all etc is not supported in enrichment so I am thinking the only way would be to get the total count of records coming into enrichment B through a variable.  Do let me know if any ideas/ suggestions on this. Thanks