Solved

Hello,There is a significant amount of bot traffic hitting one particular page on my site. This traffic is coming from Typed/bookmarked, has 0 second visit duration, and views 1 page and leaves. The issue is so significant it's causing this to be the 2nd top entry page on the site. My issue is that when I pull these IP addresses from Data Warehouse, there are hundreds of them. When I change the time frame, some of them overlap but I see hundreds more. This would be really easy if it was just a few IP addresses to block, but it seems to be a dynamic list of IPs with all different domains, browsers and operating systems.In this case, what can I do?Thanks,Cristine

Hi there,on our site we are tracking error codes which happen when users register themselves. We collect these error codes in one eVar. Now I have the problem that these error codes are just codes and I need to classify them to give them meaningful names. If I have one value per item this is no problem, but how do I classify them if I get more codes per eVar, e.g. "eVar1=Error Code A, Error Code B, Error Code X"? The formatis always the same, the codes are separated by commas. Is there a way to do this or do I have to content myself with classifications for items with only one value and as soon as it is a combination I'll have to do this by myself in Excel?Thanks in advance for your help.

Hello,Could you please help me to understand how to link properly Adobe Analytics to AdWords in order to see the bounce rate in AdWords?I am running some campaigns in AdWords using a parameter in the URL. Then this parameter is correctly set up in Adobe Analytics (Paid Search Detection), and I am able, on the tracking code report, to see the data (bounce rate, visits etc.) BUT I do not see in AdWords the bounce rate coming from Adobe, that would make my life easier in order to optimize the campaigns.How can I see the bounce rate in AdWords? What should I do or configure?Many thanks for helping.

Running into a LOT of issues refreshing reports in Sitecatalyst. All too frequently when changing segments, dates, or site, for some reason the page will refresh but will not update anything. Even worse, it will often time out after a short amount of time and upon refresh load the default setup that you normally encounter when you first log in. On the default dashboard all the data is blank.

Hi,if I want to see only those users that found their way to our site only through organic traffic, I have to be aware that some users enter directly our site but then during their visit use a search engine for navigation. If such a user leaves the site during his visit and returns via search engine, he is also counted as organic traffic, right? How do I get then the real original organic traffic users and not only those who used search engine for navigation? (I am using reports & analytics only)

Necesito ayuda en un asunto.Actualmente tengo un sitio que tengo etiquetado un simulador de crédito con eventos y un eVars me rescata un dato que cruzo con mis propias bases de datos internas. Lo extraño es que omniture me rescata un 30% más de datos que mi base de datos, lo que a primera vista nos dice que el problema está en la base de datos, sin embargo quisiera saber si:¿Hay posibilidad que omniture esté guardando información errónea?¿Alguien ha visto estas diferencias en su sitio?¿Esto es algo esperable o normal?Estamos revisando las bases de datos a ver si nos estamos equivocando, sin embargo quisiera descartar por completo si omniture pudiese tener algún problema. Quedo atentaAlejandra N.

I would like to know how to analyze using lid on JavaScript button action.situation is like below.There are 4 type of button action using Javascript.please look at attached file(Adobe_question_20150703)mark red textWe embed lid number using "on click"event(onclick="rb_addurlprm) in html source.  1.Open (close) button +2.Add form btn3.calculate btn4.Conditions change btnNow we couldn't get log and button scroll action stopped due to S_CODE ”rb_addurlprm”. Because this type of JavaScript button action is Asynchronous Page transition.Lid can't get such Behavior.So, please let me know how to analyze such Asynchronous Page transition using Adobe Analytics.Best Regards,Kenji

Hi,this is Poornesh Mishra i'm working in an IT company an IT Company as Digital Marketing Expert and need an adobe analytics account.please get back to me ASAP its Urgent for me. Poornesh MishraEmail: purnesh.kumar@srmtechsol.comPhone: +91 983 984 0431

A client had dynamic creative built in Google studio.  Depending on the CTA featured in the creative, a different landing page URL is applied to the creative.  There is a google drive document that houses the landing page URL for each variation of creative as directed by Google Studio.  We are using DCM as our ad server. We have noticed since launching the creative that the dynamic creative seems to be overriding the landing page URL suffix applied in DCM.  thus no Omniture tracking is occurring with the new dynamic creative.  Does anyone know a workaround to be able to track the clients website traffic that is attributed to adverting. We can only think of creating different versions of dynamic creative for each vendor, but are hesitant as if we add any new vendors to this campaign, creative production costs would be needed for each new vendor.  Thank you in advance. 

Hi,Would it be possible to get something in place within Workbench which allows a max/min etc capability ? This would work in the same way as total( ) but would obviously be max ( ) . There is already a max, but this does the maximum of two different metrics rather than the maximum of a single metric.Why would this be useful ? - I'm doing some indexing to bring together differing metrics that all have different scales, I'm doing this (in excel) by index to max, but I can't see anyway to do this within Workbench. It would be very useful and timesaving to have this feature. If its easy to do it would be very useful to have extensive options min ( ) , avg ( ) , upper quartile ( ) lower quartile ( ) etc etc

With a bookmarked report in Reports & Analytics, how can I tell exactly how the report was initially created? In other words, how can I determine what the exact path of the initial report that it is based on, as well as other options like the Preset Date Range?I am reporting for a client that switched reporting suites and am trying to recreate some bookmarked reports in the new one, but I can't find anywhere that specifies exactly how a report was built, and some of the numbers seem suspiciously high enough to make me think I haven't duplicated the report setups correctly. (I was not involved at all in implementation and many others have access.) It might not even be possible to duplicate exactly due to the implementation differences. For example, I have some bookmarked "Original Entry Pages" reports in the original suite that I think (but am not 100%) are built by following:View All Reports > Paths > Pages > Entries & Exits > Original Entry PagesBut in the new repo

Hi,I wanted to know what is the free quota or hits per day or month using Adobe Analytics. For Example Google Analytics gives 10 million hits per month free after that you have to get a premium account. Is there any limit of hits per month using Adobe Analytics. And are there any other limitation using Adobe Analytics??Thanks 

Dear Folks,When I'm trying to chat with Adobe support team, most of the times the chat window is not responding properly.It will not respond for more than 240 seconds and suddenly it will wake up in the middle. I've already raised this with some of the support associates. But I'm not sure whether the request was reached properly.So please have a look on this issues and provide the users a bug free chat tool.Thanks in advance.

I created a Segment control using Report Builder's Request Wizard. The Wizard referred to it by cell address, like "SheetA1".  I then cut the control from the Excel file. There was no option to delete it. The Wizard then referred to the Segment control within the Segment selection as #REF and I can find no way to delete the obsolete choice from the drop down. So what is the proper way to delete obsolete segment control references? Thanks, BK

Hello,I'm not a developer myself so I'm not intimate to server vs. client side implications, but I am in charge of designing technical specs for our implementation. I recently found this article from a previous discussion posted on the board: https://marketing.adobe.com/developer/documentation/data-insertion/c-limitations  I have a couple of questions after reading this:This first is a question one of my tech leads always asks me, is it preferable to implement server-side or client-side? what is the best practice? I'm seeing that our developers opt to implement server-side when possible, but it seems like that comes with a high degree of difficulty given the back and forth we always go into when implementing.We don't use a tag managment system yet but are thinking about implementing DTM. Does sever vs client side implementation affect in any way how to implement DTM? Again, what is the preferred way to do it?Thanks!

Hello,I would like to track the pages that a customer visits on my website before to click on a button "A" that redirect to an external site.The button is a custom event that I already defined (so I am able to see how many clicks I get on that button) but I do not know how to see the pages that preceded the clicks. I tried to use the path finder features, but I am not able to track anything since I can not define as "specific page" the external site, and since I can not define the button as a "specific page" (because it is a button). Any ideas?Thank you.

Hi,I would like to check low-traffic data in prop report.I requested it by Data warehouse tool.But it rejected because of data was too large, despite the date range is one day.How can I get it? 

What I am finding is that the reports are exactly the same in every way other than the time interval. One covers exclusively the month of May and the other covers from May 1st until July 16th.I'm not sure why the page views, visits, and unique visitors are different even though they are both covering the same individual days. [img]May-July16thkeymetricreport.PNG[/img][img]1month(May)keymetricreport.PNG[/img] Any insight would be appreciated. Thank you!

Hi,Can anyone tell me how to format Omniture Data Warehouse FTP output i.e. Date Column formatting (as 'YYYY-MM-DD') and output column delimiter. Regards,Kamlesh

Hi Folks,I would like to run something by you.I have a metric "Comment"; which is present only on an article page. However when I run the Page Type report (eVar8) combine with the comment event I can also see the Homepage being included in the report, despite there is no the comment event on the homepage. I believe this has something to do with characteristics of eVars and Props. But the when I use the Props report I can't change a metric (only available metrics are instances, visits etc)Qs:If my assumption is correct (eVar assigns a value to the page type = home page because the user has stated on the homepage), am I actually seeing inflated numbers?How do I run the report which would show me only those types relevant to the comment event?Thanks guys,Jakub

On the order confirmation page, I'd like to pass two item level events.  Event 20 captures an item level discount amount that was applied to a product, and event 21 an event for the item being discounted.  There wasn't an exact example of this use case here (https://marketing.adobe.com/resources/help/en_US/sc/implement/products.html).  Here's the output:events:event39,purchase,event8=0,event42=175,event20,event21products:;ABC;1;85.0;event20=10.0|event21=1,;DEF;1;90.0;Everything looks fine at the an order level, but if I want to look at the discount information by product, event 21 was applied to both products that were purchased. Event 20, the discount amount, was applied to the correct product.Any idea what I might be doing wrong here?

We have a scenario where some of the entries need to be classified manually as those do not follow a pattern and remaining need to be classified via rule builder. Is there a way by which in rule builder we can define a rule to classify only those which have a classification field is empty and leave others as is? Thanks Parm

Colleagues , hello ! There is a question: how to transfer iD sites in omniture? In Google Analytics , we use option: ! [Sdt1], full reference looks like this : http: //www.starateli.ru/ ? utm_source = iVengo & utm_medium =! [sdt1] & utm_campaign = RREvoque

Has anyone had any issue viewing segments after opening a shortened link report or clicking on a report in a dashboard? The segment menu just keeps loading and nothing shows up. It's odd because only some users are experiencing this issue. 

I have one user who  sees dim screen when logging in - cannot get past the strange overlay.  I'm guessing it is an error which the welcome box but it's consistent across all browsers.   I can login fine.   I've tried to login as the user and it happens on my machine.  see screenshot.