Adobe Audience Manager

Hi Guys,Data is not flowing in rule based traits. What could be the reason?I am using Adobe Analytics Report Suite as a Data Source and enabled Server Side Forwarding also. However onboarded segment from Analytics is showing data.Also I need information about creating rule based trait for OOTB data such as Day Since Last Visit, Entry Page Name and Activity Map Link Name, what will be the key Value pair for it?Any response and suggestion will be highly appreciated.

Hello everyone, Do you have any suggestion how to create a Normalisation Data in Audience Manager? Basically, I have many inbound  flows from different data sources, I am thinking of how to normalize my data in input.Thanks   

Hello, I built a trait and checked trait graph. I think Device ID number should larger than cross device ID number.But, My trait cross device ID number is greater than Device ID number. Is it possible? For this reason some trait shows device ID (of trait graph) equal 0(zero) What should i check to solve this problem?

We load AAM via Launch.  AAM is loaded at the same time that the Analytics core is loaded and we are using server side forwarding. Our IT department is asking if we can delay the destinations being sent to AAM until later on the page.   It that possible?  Is it possible to still load AAM at the time that the Analytics core is loaded, but to delay the destinations being sent? 

Hi guys Does anyone who if AAM will add "lasted edited" column to the segment and traits table?  Adobe Analytics have this feature, which is very helpful to find recently created segment/trait without having to check segment/trait ID.  Thanks! Kind RegardsHang

Hi, We're having trouble installing the AAM extension on launch. Most of the guides in the installation are still using the old version, with the current v 9.5 in launch the DIL portion are missing. I tried using the custom code and paste the DTM custom code but when I try to save the extension it give me "Please correct the Invalid Input" but it does not mention which part should be corrected. Does any one had the same experience? Thanks! 

We have created a test group in Audience lab and map the test segment to ACS and GA, but we are not able to see the test segment name or the mapping key in the audience library. As far as destination concern i don't see any issue in it (default segments are being exported and visible in audience library),on the other hand the test segment ids are reflect in GA which is a cookie based destination. Does the audience lab test segments are not work on the server to server destination? How could we validate the ids are exported? (since we have mapped many default segment to that ACS destination we can't export the server files from SFTP to valid. the files size are huge) Please guide me in this case. 

Hello everyone, Anyone had some link where I can learn how to create output result to share with other systems after merging differents datasources?Thanks

I've been watching Experience League tutorials but I feel like I'm missing this bit. Apologies as I know it's fairly basic! 1. How does Audience Manager know that a signal from a CRM data set and a signal from Analytics belong to the same user? 2. Follow up would be, at what stage of implementation is this made possible? Any help is appreciated, thanks.

Hi,we have 2 accounts (local, group) of Adobe Experience Cloud - each including AAM. Will it be possible to create a destination between AAM local <-> AAM group in order to share segments between them? Any tips? Thanks, Michael

Hi there,  I understand there is another similar post to this but I have been hearing mixed messages so wanted to get clarification. For rule-based traits:You can qualify a rule-based trait immediately via several methods1) Using the URLs provided under the "URLS and tags for the pixel" under Trait Action in AAM. Copy and paste the URL, once you see the black screen, you have qualified yourself to the rule-based trait.  Example: https://company.demdex.net/event?d_sid=123456789  Questions and confirmation needed for this:Is this qualification effectively immediately? Will this apply to cross-devices or need to wait 24+ hours?If I want to use this method to qualify a specific account, can this URL be modified to something like this: https://company.demdex.net/event?d_sid=123456789&d_cid=datasourceID%01CRMIDCan d_unsid be used with this method instead too? For on-boarded traits:My understanding is that you can only qualify onboard

Today I tried to perform some normal maintenance using BAAAM to request all Traits. Unlike previous attempts, it now pops up with a note that it is restricted to 1000 traits and you have to put in a page number (1 for 1-1000, 2 for 1001-2000, I suppose) to get these. Is this new? This makes performing an audit very tedious for those of us with thousands of traits. Am I missing something? Thanks.

Hello - we've come across the same question a few times from the business and our Adobe Target admins. We're seeking to do some onsite personalization via Adobe Target, using 3p audiences we built using an Audience Marketplace data provider.  Given that these are 3p cookie pools, devices have already qualified for the segment.  So when they land on our website for the first time, will they see the personalized experience (first page) or would need to take an action on our website to qualify?  Many thanks-   Marc K.

Hello, I wanted to understand implications to a segment's population when an underlying trait's qualified profiles are either updated or deleted using d_sid or d_unsid parameters. For example, if I use "d_unsid" in my ingestion file to remove 5 UUIDS from my trait then -  1. How will the trait population will be affected in terms of Unique Trait Realization and Total Trait Population.2. Assuming there is a segment built using just the above trait, how it's Real-Time Segment Population and Total Segment Population will be affected after file ingestion. @shweta_singh @ankita_sodhi @varun_kalra Thanks,Har**bleep**

Hello,I've pulled over an "exclude bots" segment from analytics into audience manager.   Is it correct to assume for my segments in audience manager I would use the rule "and" to suppress any bot traffic from my segments?

Has anyone successfully done file based offline ID sync (not for PBD) recently?If yes, could you share the exact steps and settings for both the data sources?We have an ID (say hashed email) that's available on website front end for ID sync (data source 1). But, the offline data file will be uploaded using a different customer ID (data source 2). We'd like to send an offline ID sync file or match table later on to AAM to tell that both IDs belong to the same person.We uploaded file like this: adobe_id_datasource1_datasource2_<timestamp>.sync So far, we have configured both the data sources as cross device and uploaded the file to the s3.But, while looking up the trait and segment qualifications using the d_cts=2 flag, we do not see that the hashed email ID (data source 1) qualifies for the traits and segments. Thanks,Varun Kalra

Hello,  According to this link, I'm trying to understand why there is not AAM signals from AA on c_state, c_long and c_latitude on Data Signals dashboard.  Is there any additional settings that should be done in order to see this variables?  Best, 

Hey guys, can someone tell me connection between analytics and the audience manager by publishing/sharing segments from analytics to the audience manager? The lookback period in analytics by publishing segments is maximum 120 days. I have shared this segment from Analytics to the Audience Manager. Now i can see this segment in the audience manager. But in the audience manager i can also see, the experation is automatically set for 16 days, but why? I want to collect as many users as possible, this is why i set the lookback period to 120 in Adobe Analytics, so i thought this segment includes user from the last 120 days. but how should this work, if it expires after 16 days in the audience manager? Thank you 🙂 Segment in Adobe Analytics: The Trait of this published Segment in the Audience Manager:     

I hope I'm posting the right section.So our client is using Adobe Analytics and Audience Manager.Is it possible to dynamically  generate and export audiences and their attributes (such as product pages viewed) in order to run dynamic retargeting campaigns with Google Ads?Dynamically meaning I will not create an audience for each product page, but one larger audience where individual parameters can be sent to Google to run dynamic ads.Mind the client will not accept to install Google pixel on the website. ThanksAndrea 

Hi Everyone, I am unable to track down any documentation that specifies if there is a limit to server 2 server calls between Audience Manager and Adobe Target.  Thank you!

HI,We have two different cross device profile merge rule created (scoped with different data source), one CRM (DPID 123) and one for products attributes (DPID 456). so when we build the segments, can we combine these two distinct onboarded trait together in segments and apply any profile merge rule. As i understand profile merge rule work based on datasource, so the rule that applied in segment, which is not connect with the one trait that I configured, will still be stretching the user? Example: CRM users(DPID 123) + black jeans product(DPID 456) both are onboarded trait.Is that possible or this is right way to do. Is there any option to build segments out of segments in AAM?ThanksKeerthi

Some of our pages have a new naming structure and I believe I will have to edit the names of old traits that will be effected by this. I thought there was a report you can pull that shows any trait that's showing up with zero trait population, i.e. something is broken. Am I missing it somewhere?

Hello everyone, Anyone has experience how to connect Data lake with AAM?thanks 

Hello everyone, Any suggestion how to integrate IM8 with AAM?Thanks

We want to update several existing Audience Manager data source integration code names but want to confirm if there are any detrimental impacts.  For example, an existing data source has an integration code name of “123”. We would like to update the integration code name to “abc”.