Adobe Analytics

Hi. We currently have an a client whose user access either via user/password or IP authentication.  In the case of IP authentication, each user that comes in via an approved IP address gets logged into our Drupal site with a the same “IP-only User”.  That traffic is not being captured fully in Adobe Analytics.  The non-IP authenticated traffic is being captured. We cannot get their HAR file.  Our suspicions are they might be blocking AA-related cookies or have restrictions on their browsers.  Does anyone have any other ideas on what might be happening that we can look into further? Thank You.

Hi all, I'm in a bit stuck here trying to find where the issue is with some inconsistencies in Marketing Channels. Recently my company has migrated part of the website to NX (last 2 weeks), resulting in traffic being attributed to Direct rather than Paid.  Some of the URLs are recorded twice, the same CID results in two different Marketing Channels (URL highlighted in yellow is an example, a CID with 'ppc' which should belong to Paid Search, but is attributed to both Paid Search and Direct). Here are the marketing channel processing rules set up in the Reporting Suite.  Any ideas on how to fix this would be very much appreciated!

Hi I am new to Adobe forums. I am here quickly would like to know where I can obtain official training for Adobe Target / Adobe Analytics in India (Mumbai) or in India? Have we got any official Adobe Training Partners in India who delivers training for this software? I have come across many who delivers Online training for a few hours but I couldn't materialize as none had access to the tool or supply access to the actual Adobe Target / Adobe Analytics tool.  I have even come across institutes who are willing to deliver training on an official ground stating I will get an Adobe Completion certificate directly from Adobe USA. However, I wasn't that convinced with the offer hence didn't proceed reason being the institute wasn't willing to disclose the trainer's profile. Your help is highly appreciated. I am even OK if anyone within Adobe willing to deliver training for the same. Thanks & RegardsSiddique

I have 3 - 4 years experience of using adobe analytics reporting tool and planning to take certification but I see there are 2 certification  AD0-E208 Adobe Analytics Business Practitioner Expert & AD0-E202 Adobe Analytics Business Practitioner Expert As this is my first adobe analytics certification I don't know which one to select AD0-E208 or AD0-E202. Also how much time can I take for exam preparation ? 2 - 3 months?

I need to  create report for visits for daily and 90 daysI have done in a way shown above way . Is this right way ?Also. I am doing summary change and It will obviously be giving me big values , Please suggest me a alternative or i should breakdown reports? Please let me know the alternative way of doing? 

Hi, We want to use one Launch property for three mobile apps. Reason - We have a similar setup for web where we have one report suits for 3 websites and we have an eVar to captures website's name. So to see data for one website in Analytics dashboard we just filter based on the website name eVar. We are looking to have a similar setup for App but for App I am not sure if we can have a similar eVar or conextData which will allow us to filter data for each app in dashboards, if it's an option please help with an example setup in processing rules. or suggest the best way to do it? Thanks in advance,AK

Hi We are developing a visual score card tool for customers to assess how sustainable our financial investment products are online. They select a financial product, and we show them how the product scores on RAG scale for sustainability metrics (water usage, carbon neutral, human rights, etc) scoring Red, Amber or Green in each area. We want to use analytics to measure how this page will affect customer decisions. For example if a low human rights score detracts customers from one of the product. (Note the score cards are not clickable.) Currently we only have dimensions for page and link tracking. To create the right dashboard we need capture the RAG (e.g. Green), the sustainable feature (e.g. Human Rights), the product (e.g. Investment #2).  What is the right dimensions/metrics to implement in this solution design? I am just attaching a mock up I found online...  

 https://developer.adobe.com/analytics-apis/docs/2.0/guides/endpoints/dimensions/Is there a way to know the eVar’s Expiration date on Dimensions? I’m trying to pull that data point

hi, I generated the token the hard way. but I couldn't get the page visits. can you share a sample c# code? i spent a lot of time with it but I couldn't come to a conclusion. 

I saw a report where the visualisation ,The summary change of visits and bounce rate for this year - last 90 days to last year- last 90 days , Gives  around 5863.6% because of large change in numbers. Is it fine to have such reports?

Hi everyone,We have two website a main website and a website on subdomain . As, both are somewhere related like the the subdomain is for portal login and main website is public.We have seperate properties for the main and subdomain.So, here whenever I navigate to subdomain and comeback to main website.s.getPreviousvalue cookie i get two seperate gpv cookies. Which is creating problems where the sub domain gpv cookie is bypassing the public pages which  is giving me a previous page value prop incorrectly. Not sure why two gpv cookies are set when I go to subdomain. Same code is written for s.getPreviousvalue for both properties.

We currently run the following set of rules:1. Standard Variables are set, including s.campaign2. If virtual page view event is pushed to the dataLayer, additional variables are set3. s.t() beacon gets send What I see in my data is that the visit is correctly attributed for both Marketing Channel and Marketing Channel Detail (=s.campaign), but the virtual page views within the visit get Marketing Channel Detail "None". Interestingly, s.campaign seems to be available in the virtual page views and I also see "Marketing Channel Instances". (see attached screenshot) My expectation would be that everything happening within a visit (30 minutes time frame) should have the last known Marketing Channel AND Marketing Channel Detail. What can be reasons why the latter might change during a visit? And even if it changes, why would the simple rule Marketing Channel Detail = s.campaign result in "none" when s.campaign is available?

Hi, I am building a Analytic report to track the submission of a form. But all data are gone when I include a Page segment to filter by URL. Here is my setup: 1. Rule in AEPDC to track the form submission to `eVar1: Form Name`, whenever I submit a form on the page "https://beta.form.ca/en.html".     2. The recorded `Form Name` will then be the reported in Analytics: 3. But when I add a segment to only see the Form Name from "https://beta.form.ca/en.html", the data are gone. Note that I am using the `Page` dimension as that is where the URL values are being recorded, and I don't have the `Page URL` dimension. To sums up, all forms were submitted from the intended page URL "https://beta.form.ca/en.html", and correctly recorded. Yet when I filter by that same URL, the data are gone, as if the `Form Name` eVar is not tied to the page URL. I am more of an AEM developer so quite new to the AEP/Analytic stuff...what I might be missing, wh

Hi everyone,I have exit links OOTB enabled in Analytics extension and Link clicks Rule with  event1. I have been capturing pageName with these events and I am not capturing page Url in eVar for link click  and exit.Now , I need to create a segment for one of the section of page. I have option of creating segment based on pagename and pageUrl .If I am using pagename it is giving me more visits compared to page Url.Can anyone please tell me which dimension will be the right one to segment. Also, why exit link is increasing my visit and pageviews. ?

I was trying to analyze data for 2017 and I used data feed to get all data. It was a daily view. My question is there any way I can read that big .tsv file or is there any other format I can download the data?

Hi everyone,The  team has said that , they need visit and unique  visitors for daily , monthly view .they are not very sure about how report look like.  I have created like a aggregate like below :-visit metric (row) and for daily date range(This month yesterday and for monthly view- rolling from month start to yesterday( column). so I am just getting overall report .  Can, anyone suggest what should the report look like or is above right way?

Can anyone tell me how will be the report for traffic at the time of the day? Will this be a hourly?Traffic usually means visits right.

How will the report look like in analysis workspace for any specific link click analysis and what are the  metrics and dimensions we use to create report?

Can anyone tell me how to create report in workspace for organic vs paid traffic using marketing channel reports.

Hi community, I am helping our client to plan how to integrate Adobe Analytics to React native environment, I've search across the internet but no much detail found for how toThe official package is already deprecated https://github.com/adobe/react-native-acpanalytics , which in the doc suggest to setup the tracking through mobileSDK, but which is rather track on the app side instead of the react native webview. I've checked the old community threads, also tried few 3rd party package but no luck as well, and nor found official guide for it. Does anyone have the suggestion (or an example, even better) for integration, or is it impossible to do it now? Any info would be appreciated.

Hello - is it possible to disable the Demdex Cookie from firing and populating a UUID without breaking our ability to tie or measure users between our internal Experience Cloud tools (i.e. Adobe Analytics and Adobe Target)?  I understand this is not a traditional third party cookie, but I have some concerns with firing an ID that is being populated on both my domain and of domains that are not of my own.

Hi everyone, I have exit links OOTB enabled in Analytics extension and Link clicks Rule with event1.  I have been capturing pageName with these events and I am not capturing page Url in eVar for link click and exit. Now , I need to create a segment for one of the section of page. I have option of creating segment based on pagename and pageUrl . If I am using pagename it is giving me more visits compared to page Url. Can anyone please tell me which dimension will be the right one to segment. Also, why exit link is increasing my visit and pageviews. ?

Got to understand that Adobe intends to put an end to the report schedule delivery function which my workplace is currently still using which will affect some reporting. Is there anyone from Adobe I can reach out to extend this service? https://new.express.adobe.com/webpage/WFCyq7w8kijmB?   

Hello everyone, I am trying to connect to Adobe analytics connector 1.0 with powerBI. I need 4 dimensions as filters example-Device, State, Country, AgeAnd I have 3 measure that I wanna look at it over time example- Conversion_rate, Visitors, purchased a product(event)Here is my problem-If I pull all the above dimensions and measure and load it into powerbi model. If I start using dimensions are dynamic filters on dashboard and want to look at measure over time(month) the aggregated numbers are so different than what I see in adobe. I have tried couple of approaches with creating multiple tables with same measures for each dimension. But still couldnt get what I needed. Would be really helpful, If anyone has faced the same and have any idea how to fix this.Thanks 

Hi , I do not see the Calssification import options highlighted/allowed to select while importing calssification. what could be the reason?