Adobe Analytics

Hello everyone,  I'm if you all knew of a way to create segmentation or a complicated metric that allows us to see rows of a dimension that performs well for multiple metric columns.   Example:  In 1 table, I would like to see something like: "show me URL's that have greater than a 500 visit daily avg, 100 or more form complete impact (participation+visits), and have at least a 2% CR impact or higher to form complete.   here is a concept picture:  The issue, is that if I up-prioritize one column, the other metrics are usually flipped.  It doesn't seem to allow visibility in a single view.  A scatter plot helps with this visually, but you cannot right click items out of the plot and create a segment out of it or a metric.   Thoughts?

We are on the new UI of datawarehouse.  I have configured my destination and location.  All things are set and yet I do not get a "Save report" so that it will start working.  I was able to set up a new datawarehouse report that emailed to me.   This new report needs to use SFTP.  I am not getting any errors.  I am also unable to see how I configured my destination and my location to see if one of them had an issue.   I tried again and used a new destination and location and still I do not get a "Save button".   Any ideas on what to try next?

My company recently migrated a page to NX. One particular event in the Digital Layer is stop being tracked by Adobe Launch, even though the event details are exactly the same. What could be the potential cause?

Hi Team,   I saw this error on console not sure why we are getting this can anyone help me to resolve this.    

Hi, we have a customer journey flow and we have Analytics tracking at every step of the journey to detect customer drop-offs. We have been having significant differences in analytics even when the customer has progressed quite a bit into the journey. There are steps that are missing in Adobe tracking, but the server-side calls indicate otherwise. My question is, are there any known limitations where Adobe analytics tracking may fail? I observed when I tried the customer journey from a Mac or an iOS device, Adobe trackers were blocked instantly without me explicitly asking me to do so. Would those reasons contribute to analytics tracking to drop off? Any other inputs are appreciated! Please note these tracking requests are sent client side.

Hi,I'd like to create a standard report for a type of web page we have, but be able to pass the name of the page into the report's URL so a user can just click, open and see the right data.e.g. https://www5.an.adobe.com/x/5_13ckwy?page_name=xyz:en:your:page Is this even possible?Thanks.

Hi ,I am on workspace dashboard. For one of my evar, the value i get is in this format (abcdef|01071||||||35603|serra abcdef of decatur||al|| 1056 0), as these are concatenated with the classifications rule.so the value i have here consists of 6 fields like brand name, zipcode,dealer code, dealer name, country etc etc. now here i have to set an alert for set of dealers, who are having zero orders daily. Here i have to set this for around 66 dealers. how can i break down this data with dealer names and create the alerts, can anyone explain me please.   

My company has several APIs to facilitate usage of our products. Can we use Analytics to track usage of these APIs somehow? I imagine that might just be firing custom javascript upon API usage? or is there a better way for a high-usage API that somebody has considered? I googled this a few ways and all the results were just about the Analytics API itself, not about adding Analytics to an API.

Hi,I'm a frequent user of the Adobe Experience Cloud Debugger. Main purpose is to verify data collection as it has always displayed the captured data very well. There are multiple different tools to achieve the same goal. If you use the browser built in Network tab in dev tools you usually see two AA requests for a page load, one redirect request (status code 307) and one standard request (status code 200). This was one great benefit with debugger, that it only showed the "true" page load hit with status code 200. However, that seems to have changed very recently.Getting multiple hits for each load is soon making the validation a bit teadious, especially if you intentially send more than one request on a load. I haven't found any way to filter the hits to only display the status code 200 hits. Is there any way to achieve the same functionality in Debugger as it has been before i.e. to only display the 200 hits?

We are using Adobe Analytics with AEM screens and are curious if anyone has successfully implemented a success event metric with this set up or if you need to create custom metrics with the eVars that are created.  If so, are you able to share how you set it up? 

I have a data element that captures the Search_Term when users types it in the search bar. The data element is using Core - DOM Attributes:  The rule is triggered via custom events when a user conducts a search action.  When I type in the search bar and use the _satellite.getVar('Search_Term') I get the correct value. However, when the rule triggers, I do not see the search term variable being populated.  Some insight would be appreciated here.  Note - I am also trying a different method to capture the search term from the URL: https://ABC.XYZ.com/search?keyword=Climate (Will update here once I test it out).

Hi folks, maybe someone discovered the same or a similar issue within Adobe Analytics.If i am using a virtual report suite (segmented by 2 different evars), i receive different numbers, depending on which language i chose for my Adobe Analytics language.This is what i see with language english: This is what i see if i change the language in AA to german: I'm scared to check on other languages.Any ideas on this? 

As of late, we have had files arriving later than we have specified in our Data Warehouse schedule. For example, we have several reports scheduled at the same time to arrive to our FTP server, but some reports arrive hours later. Is this a known issue or is there something we can do to mitigate this issue? This is making our reporting less reliable than ideal as not all reports arrive on time and we are unsure why 

Hi - I'm trying to get clarification on channel attribution with the creation of new tabs (new windows) and how AA correctly does this. I understand it takes all the sessions as one, so if someone is organic, they stay organic. However, data for a direct channel with many customised factors comes up per page with multiple-choice product makers and shows a very similar traffic value (50% + or - 5%). This suggests a session is broken and attributed (as seen elsewhere in other tools ). I wanted to know how AA counts and attributes '_blank' window open multiple sessions and they can be attributed to other channels - specifically direct which almost mirrors the organic traffic at a higher or lower traffic percentage.  I've noted a correlation between opening a new tab in Screaming Frog 'target' showing an attribute column for '_blank', and simply opening a new window. The site opens up various new tabs let's say, every time you try on a new pair of glasses, and you choos

Hi We are running a multi channel digital campaign. When looking at Adobe Analytics data we are finding that the LPV ( landing page) stats are higher than even the clicks recorded in GCM. This is for all channels trafficked through The Trade Desk- audio, video, display, publisher placements etc. Looking into bot traffic, bot crawlers etc but does not seem to be the contributor. Brand Safety in place via IAS. Any suggestions? Could there be an issue with the way Adobe Analytics is ingesting UTMs?  

I'm looking to see if it is possible to segment my customers' sessions in the following ways.1. All sessions up to and including a customer's first order2. All sessions that occur after a customer's first order.   Is this possible?

There seems to have been a number of issues with the Data Warehouse UI as of late: Schedule button frequently won't open on multiple browsersData Warehouse requests won't open to view detailsReports made sometimes don't get created despite hitting 'request this report' Is this a known issue/is there a known solve? This is making it difficult to maintain reporting

Hello, I created a summary change visualization and I want to lock that visualization ..when i try to  do so im getting a certain error which says "Unable to render visualization: Please check your columns and rows to ensure they contain valid components". What should I do to lock the visualization. 

Hi, I have a query related to creating alerts on the analytics workspace.So the process i followed to create an alert is :1. Created a dashboard in the workspace2. Then selected the rows and columns i wanted to create alerts for3. After selection it took me to the alerts page, where i can put the condition.4. and add the details of the recipients, granularity and then save5. Next day i got the alert to my inbox, but when i click on the analyze button mentioned in the email, it dont take me to the dashboard i have created instead it navigated to the workspace with visualization in which i dont have the clear information.Please guide me through the steps.Thanks,Udaya

Is it possible to set the Activity Map module so that it sends information on the POST requests too? Right now it only works on GET requests for SPA.

📢 Announcement: Adobe Analytics Mentorship Program 2023! 🌟 Dear Community Members, We are thrilled to introduce Adobe Analytics Mentorship Program aimed at empowering Community members to upgrade their skill levels by achieving valuable Analytics certifications. This program brings our Community's experts – Mentors – together with our newer aspiring product learners – Aspirants – to foster knowledge-sharing, guidance, and mutually beneficial opportunities for professional growth.   📆 Program Timeline: The Mentorship Program will officially commence on July 10 and finish on August 25. During this period, participants will have the opportunity to engage in enriching mentorship relationships, gain valuable insights, and work towards obtaining certifications in their desired fields.  June 1, 2023: Program Announcement / Applications Open  June 26, 2023: Application Window Closes for aspirants July 5,&

Use case:Currently we are experiencing an issue integrating adobe analytics with our mobile flutter app.We are using the library flutter_aepcore  (https://pub.dev/packages/flutter_aepcore version 3.X.X)At the moment upon running the app for the first time with no internet connectivity we are seeing exceptions been raised in 2 places:1. Downloading the json configuration file2. Registering an experienceCloudId (Identity.experienceCloudId call in aep_identity)Problem 1:For the first scenario, we plan to use a local copy of json file as a workaround. Is there a better approach? https://blog.developer.adobe.com/optimize-your-experience-cloud-mobile-implementation-with-bundled-rules-configuration-e69977c18736Problem 2:For the second one the way forward is a bit less clear.Our concern is if the app goes live with Experience Cloud ID and if the user lands on a bad internet area, it would probably result in crashing the app. 1. Is there any better way or suggestion around this?

Hey Experts, I have a scenario which i want to track form submissions, form is getting loaded within a iframe  these form content is loaed from another third-party website.Page A : We have control header and footer loaded from our side (www.mydomain.com)Page B(iframe embeded on Page A): loaded within i frame from a third-party website.(www.3rdpartydomain.com) I wanted to tack form submission  and also wants implement data layer to get the  values. I have to implement these via adobe launch. Please suggest me best practices and way to archive this