Adobe Experience Platform

Hi Everyone, We have a service setup within Data Science Workspace (and models and a query) all produced by someone that no longer has access to our instance of AEP.  As a result the service (training and scoring) and the query they wrote--that are scheduled to run every week--are failing due to authentication/access errors.  Is there a way to assign the service/query to a different user (or a generic user)?  Or does the entire process need to be recreated with a different user?  It seems like there should be a more generic way to set these up as people may come and go?  Thank you in advance for any ideas!

What's the best practice now for creating Datastreams in relation to the development environment (i.e. development, staging, production)? I remember that when Datastreams were first introduced, creating a single datastream would result in 3 datastreams, 1 for each development environment. All 3 datastreams retained the same datastream ID, though the development and staging ones had ":dev" and ":stage" appended to their IDs respectively. But now, when I create a datastream, I end up with just 1 datastream. Does this mean the best practice now is to create separate datastreams -- that end up with different datastream IDs -- for each development environment?

We would like to update only the event trigger from Page bottom to window loaded for around 2k rules. Is there a more manageable way to do that over manually updating each rule?

In our company, we have more than 20 websites/apps that were set up by a consulting company. However, their devs set up each product in different ways (some used code, some extensions, etc). In one product in particular instead of adding the name of the report suit into the adobe analytics extension in the data collection platform, the dev added %Report Suit%: (I don´t know why I cannot add the image here but here is a link to it) https://ibb.co/yd05L2N This is the only setup that doesn´t contain the name of our product´s report suit and I have no idea why considering the website has 2 report suits, one for production and one for development stages. Can someone explain please what is the difference between using %report suit% instead of "name of the report suit"? what is the best practice? In case I change the report suite in the analytics launch extension, would this cause any major issues to the setup? the debugger recognizes the correct report suit name tho.

Hi Team, I have few queries regarding data science workspace How are the files and folders hierarchy of a model/recipe structured? How does a run work (either loading, training, scoring, evaluating, or writing process)? Including: Which class calls which classes? In which order are they called?      3.  In what data type should the input parameters be in each class?

Original article   Feature Flags or Feature Toggle is a common practice used by developers. It allows to deploy specific functionalities in an incremental manner and only enable them when needed. In the tagging world feature flags is a little-known concept. Most of the time a standard tagging release will consist of creating the tag, testing it with the tag management system dev endpoint then publishing it to production. This means that sometimes the release timing is crucial as it needs literally to be done at the same time as the new platform feature has been released to production so it does not impact user experience. What are feature flags? Feature flags are a development concept that allows to wrap a functionality inside an if condition that checks a specific variable value. This variable is usually a Boolean, so the possible values are either true for enable my feature or false for disable my feature. This allows the development team to deploy

Will analytics data continue to flow when Ver4 SDK is retired on 31Dec2022?

Hi everyone,What's the purpose of firing _satellite.pageBottom() code right before closing </body> tag? I debugged the satellite library and found out that it's fired automatically just before DOMReady event.D.domReady(function () {D.domReadyFired = !0, D.pageBottomFired || D.pageBottom(), D.firePageLoadEvent("domready") })Can someone clarify why the code is so important?Thank you!

Welcome to the 1st edition of the Adobe Experience Platform Community Lens! Adobe Experience Platform Community Lens is like your community bulletin board highlighting the latest updates from the Adobe Experience Platform Community in one place. In this edition, we are sharing updates from July 2022, including, the most viewed Adobe Experience Platform content on Experience League, as well as the latest product releases, upcoming and past learning opportunities, and a lot more!   Adobe Experience Platform Community Lens LATEST RELEASES Learn about all the new capabilities, upgrades, improvements, and fixes that were included in the latest release for Adobe Experience Platform: Dashboards: Adobe Experience Platform provides multiple dashboards through which you can view important information about your organization’s data, as captured during daily snapshots. Data collection: Adobe Experience Platform provides multiple dashboards through which you can view important information abo

Hi All,I am trying to retrieve the mcid using visitor api, I just want to understand a couple of things.1) When the getMarketingCloudVisitorID method uses a callback(var mcid = s.visitor.getMarketingCloudVisitorID(cb)) to return the mcid compared to not passing the callback(var mcid = s.visitor.getMarketingCloudVisitorID()). Reason for asking is,  s.visitor.getMarketingCloudVisitorID() without callback returns mcid most of the times when I am not clearing my cookie and cache before loading the page. 2) Is there any chance the mcid generated in the user machine matches with any previous mcid(returning user), in case the user clears the cookie and cache in the second visit.ThanksShinov

Hello guys, I want to understand how  the Type of Segment (multi-step,Sequential oor Dynamic) must be used. Anyone can provide some example how to use them?  Thanks

Hello, I use Link Tracking - Never Track in Adobe Analytics to exclude some links from being tracked in "Referrer". I need to add a rule to make the exclusion of these links more "dynamic", for example : Instead of adding:  - domainone.testapp.com- domainetwo.testapp.com- ... I want to exclude the following:  [Aa-Zz].testapp.com Is there a way to do this? Using data elements for example?

Hello, We have a WEB project done on React.js The developers call a dispatchEvent in JS when the page loads.In Adobe Launch, we created a Rule that is triggered when this event is sent, like the following:  And then inside this rule, we need to read the values that the developers are sending to us in an object sent with the DispatchEvent.We found that to access these variables, we have to call the object "event.detail" like the following : event.detail.NameOfVariable So we created data elements that read all variables, for example:   In our Rule, we wrote a custom code : console.log(_satellite.getVar("Page"));  This returns "undefined" all the time. However, when we call it directly in the interface it sends the correct value.  Do you have any idea why this is happening? We need our variables to be read in Data Elements, it is easier to maintain. Thank you 

Hi All,  I'm trying to implement analytics on the platform that leverages GTM custom events and data layer. I'm trying to make use of the custom gtm events tagged against different event into Direct call rule Identifier but the rule is not getting fired at all.  In the screenshot below, we can see the events tagged along with event name at the backend and only trigger when particular event was clicked without persisting further:  In the screenshot below, you can see how i'm trying to make this launch rule work using Direct call rule:  I'm not sure what i'm doing wrong but any suggestion on this would be really helpful. Thanks!! 

Hi Team ,   Is there any easy way to collect DTM implemenation on application like evars,props ,digital data etc. Thank You

Hi, I see the values captured in the activity Map viariables using the Adobe Debugger - but when using the Extension in chrome to view the activity in a page format it is missing some links. Thoughts Thx 

Below is how we have setup Marketing Channel processing rules. Due to some limitations we didn't setup Internal URL filters in the report suite. Currently on first hit with paid campaign code in URL attribution is working fine, but on next hits it is always being attributed to Referring domain. As shown in screenshots below, even though paid search is on top in the funnel which is it attributing to Referring domain when tracking code still persists ? How can we resolve this issue?  

Hello,   I am trying to capture the page name in the below floodlight tag. I know the code I would use to get that information from the page but I am used to GTM's set up for creating variables. Can anyone explain to me where I would set up a user-defined variable?   <noscript><img src="https://ad.doubleclick.net/ddm/activity/src=ZZZZZZ;type=YYYYY;cat=XXXXX;u1=[PageName];dc_lat=;dc_rdid=;tag_for_child_directed_treatment=;tfua=;npa=;gdpr=${GDPR};gdpr_consent=${GDPR_CONSENT_755};ord=1?" width="1" height="1" alt=""/></noscript>

All the Adobe experience cloud customers would soon be provisioned to AEP and features of AEP for no extra cost. Several foundational Experience Platform capabilities will now be provisioned to every Experience Cloud customer Below are the features that will be part of this Assurance Datastreams Experience Data Models/XDM Schemas Identity Namespace Places Service Privacy Service Note that, features and applications built on AEP like Event Forwarding, AJO, and CJA will still need to be provisioned separately and are billable services. You can reach out to your account manager on the same for costing and provisioning Adobe Experience Platform Data Collection (our tag management solution, formerly called Launch) will continue to appear as its own separate product card. You will soon be seeing the Adobe experience platform in your admin console with all the above capabilities as well if you are an Adobe experience cloud customer as a separate product card. Isn't it exciting!&nb

Hello Folks,We have setup an AAM Source Connector (to our AEP instance) to pull in some historical AAM segments during our migration to CDP. We just 2-3 segments to be available in AEP. While setting up the connector, we are selecting these 2-3 segments (size of 2M profiles). But lot of profiles (100M+ profiles are ingested till date and it keeps growing) are ingested in AEP which is way beyond our contracted profiles. Still, we are not able to see the AAM segments in AEP (under "Segments" builder section). Any idea why this is happening?On digging more, I found that it is the device data that is being sent and all the profiles are keyed off of "ECID". Is it possible that the connector is ingesting our entire AAM footprint (we have 100+ sites sending in data to our AAM instance). But we want only those 2-3 segments' profiles inside AEP. Have anyone experienced this issue before? Thanks!

Hi there, hope you are doing good. Is there any way to bring AEP schema field descriptions to CJA dimensions ? Thanks in Advance.

I'm retrieving a list of schedules in postman, I notice below things in result and dont understand where this is coming from. "name": "Profile-Snapshot-Export-Schedule-da974243-e693-488d-9ba4-1d9e201c655f","state": "inactive","type": "export", "name": "Segmentdefinition-Snapshot-Export-Schedule-8fc04cca-eae9-45ca-b003-c69d926f5bec","state": "active","type": "export", "name": "delta-DB5448F45E66075A0A495CCA@AdobeOrg-089a5b28-3e43-4e31-9a5b-283e43be3195","state": "active","type": "delta", and the last one is "batch segmentation", I understand what batch segmentation is but can anyone please explain where above 3 are coming from.

Hello Experts, As part of a POC using Lookup entities, I am trying to build a segment of audiences who are viewing any product which is priced more than $50. I have been using the below schemas:Luma Product Catalog SchemaLuma Web Events SchemaLuma Web Events Schema has a SKU under "productListItems" which refers to the SKU (primary identity) field of "Luma Product Catalog Schema". I have gone through the data ingestion process for the dataset related to "Luma Product Catalog Schema". Below is the snippet of it. For testing purpose, I am using the below highlighted product details, as its price is more than $50. The segment rule I have created is as shown below:After configuring all these, when I am triggering the event by passing the correct SKU (no price information is passed in the event), I could see the event in AEP correctly tied to the profile, but I am not able to see the profile under the segment as the product price is more than $50.  Any idea why I am