Adobe Experience Manager Forms

Hello,I hope you are able to help me.We are investigating the use of AEM forms (previously Adobe Livecycle) to populate data in dynamic pdf forms.When creating the data connection and importing the XSD (XML Schema), following error appears:"The schema described by the selected root element cannot be readas the number of resolved schema nodes exceeds the supported limit.Please select a different root element of modify your XML Schema to decrease the schema size."Unfortunately none of these suggestions are applicable to us.I heard that there is a limit of 100,000 nodes. This is done for memory considerations. The limitation is a resolved node count not a direct 1 to 1 node in the schema.  There is a registry setting that will allow to increase this number.Unfortunately I haven't yet found this setting.Could you please assist me increasing this limit?Thanks and best regards,Alexander [Moderator Note: Personal information removed]

I am working on developing Fragments for address and need to capture zip code in that. The requirement is to allow 5 or 9 digit zip code and it should be auto formatted.I have tried below out of box display patterns for this and not able to fulfill the actual business requirementtext{99999-9999} - Working fine for 9 digit zip code but leaving "-" at the end when user enter 5 digit Zip code.text{99999}|text{99999-9999} - Giving totally wrong format.However for validation pattern I have used regular java script regex  "^\d{5}(\d{4})?$" and its fitting the bill. I am looking for solution to fix my display pattern problem.

Hi team,Which version of AEM is valid for the preparation of certification Adobe AEM Forms Developer(9A0-410)?Because after 6.2 there are multiple major changes to the AEM forms.

Hello,I don't know if I'm asking this in the correct section but here it goes,Cyclically, after a few days the server begins to give cache problems, the AEM Forms stops working, requiring a restart.[6/4/18 12:12:06:456 WEST] 0000120f DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInstances This scheduler instance (shaemaq11527262566011) is still active but was recovered by another instance in the cluster.  This may cause inconsistent behavior.[6/4/18 12:12:06:528 WEST] 0000005d ApplicationMo W   DCSV0004W: DCS Stack DefaultCoreGroup at Member shaemaq1Cell01\shaemaq1Node01\AEMSrv01: Did not receive adequate CPU time slice. Last known CPU usage time at 12:11:08:593 WEST. Inactivity duration was 27 seconds.[6/4/18 12:12:07:752 WEST] 0000120a UMCacheManage A   Cache has closed down no further action is allowed[6/4/18 12:12:07:753 WEST] 0000120a UMCacheManage W   Exception caught while dealing with cache : Action - Get, ObjectType - UM_CLUSTER_INVALIDATION_CACHE, Exc

Trying solve a custom case where I need to submit the form (AEM 6.4 Adaptive Form) to store the fields in a database and then email the same set of fields as an email. What would be the optimal way to do this using forms?1. Customize "Form Data Model" Submit type (/libs/fd/afaddon/components/actions/fdm) ?2. Invoke a workflow from the form submission?As first trial tried to customize /libs/fd/afaddon/components/actions/fdm (taking Adobe Experience Manager Help | Writing custom Submit action for adaptive forms as the guiding article).The question came up was if inheritance is possible for submit types.So used sling:SuperResourceType="fd/afaddon/components/actions/fdm", but seems that didnt work (the dialog properties are not populated from parent, if the cq:dialog is empty)So went ahead with copying /libs/fd/afaddon/components/actions/fdm under /apps/<project>/formActions/fdm. I changed the description and submitService on the node property as "Submit using Form Data Model And Ema

Hi everyoneI'm facing some issues during the installation of AEM 6.4 Forms on JEE JBoss Single Server[Windows installation in Standalone with SQL Server 2016]I followed all the tasks of this contenthttps://helpx.adobe.com/pdf/aem-forms/6-3/prepare-install-single-server.pdfand I started to Install AEM Forms following these stepshttps://helpx.adobe.com/content/dam/help/en/experience-manager/6-4/forms/pdf/install-singl e-server-jboss.pdfHere below the log installation filesinstall.log__________________________________________________________________________Fri Sep 28 10:50:39 CEST 2018Free Memory: 218698 kBTotal Memory: 243712 kBjava.class.path:    C:\Users\Administrator\AppData\Local\Temp\I1538123949\InstallerData\IAClasses.zip    C:\Users\Administrator\AppData\Local\Temp\I1538123949\InstallerData\Execute.zip    C:\Users\Administrator\AppData\Local\Temp\I1538123949\Windows\InstallerData\Execute.zip    C:\Users\Administrator\AppData\Local\Temp\I1538123949\InstallerData\Resource1.zip    C:

I am trying to create a datamodel using the json generated by swagger. However I am getting an error while creating it and looks like "oneOf" property is the issue. I have gone through the below adobe doc about it.Adobe Experience Manager Help | Creating adaptive forms using JSON Schema So it says currently AEM forms do not support the folllowing:Null typeUnion types such as any, andOneOf, AnyOf, AllOf, and NOTOnly Homogenous arrays are supported. So, the items constraint must be an object and not be an array.But AllOf property worked fine. The issue was only with oneOf property. So did adobe fix the "allOf" property though it was mentioned that its not supported. Also in the same way is adobe planning to release any service pack which will fix the "oneOf" property as well ?Below is the examaple schema of the one of and all of property mentioned in my swagger:AllOf:   "StateIssued": {      "allOf": [        {          "$ref": "#/definitions/BaseDocument"        },        {          "ty

Hi,I am using AEM Forms 6.2 and AEM Forms Designer 6.2.May I know if I can get and use AEM Forms Designer 6.3 or 6.4 without upgrading AEM Forms? Where can I find the installer of the new versions of the Form Designer or should I raise a support ticket for this?Thank you.

We are developing a new Adaptive Forms application in AEM 6.4 and are seeing a javascript error reported by IE and Edge....Object doesn't support property or method 'includes'File: af.js, Line: 12, Column: 9Everything works fine in other browsers, but IE and Edge throw this javascript error on radio button clicks, tabbing from one form field to another, etc. I know IE doesn't support "includes", but I'm not sure we should be going into af.js to rewrite that. Can Modernizr help us here? Any other solutions?

Good day:Does anyone know if Adobe Lifecycle Designer ES4 is still in active development or if it is in a long term support state now?Thank you,Mike

Hi,We have projects that are already live and make use of some bouncycastle classes. However we now developed services for generating editable PDF's. From the Adobe documentation we need to add org.bouncycastle.* to the boot delegation. However this seems top throw the publisher over. Below is the sling.properties file. In orange is what is already there, and in red is what was done as per Adobe docs. We also tried to replace orange with org.bouncycastle.* but that didnt work.#Overlay properties for configuration#Wed Sep 05 14:42:56 CAT 2018obr.repository.url=http\://sling.apache.org/obr/repository.xmlsling.framework.install.incremental=truesling.bootdelegation.weblogic=weblogic.xml.*org.osgi.framework.system.packages=${osgi-core-packages}, ${osgi-compendium-services}, org.apache.sling.launchpad.api;version\=1.1.0, ${jre-${java.specification.version}} ${org.apache.sling.launcher.system.packages}org.apache.sling.commons.log.file.number=5org.osgi.framework.startlevel.beginning=30org.osgi

Hi All,Is there a script that will make a text field required if a checkbox is checked?Thanks!!!!

Hi, I have configured data integration using a swagger (Json) file. In this file the endpoints are defined and also the fields. This works just fine for fields that are of type string, numeric  However the swagger file I am using describes nested objects E. G. Object1     StringField1     StringField2     Object2          StringField3          StringField4          StringField5the fields for object1 are correctly identified by AEM. Object2 and its fields are ignored. If I restructure the swagger file so they objects are not nested aem processes it correctly :Object1    StringField1    StringField2Object2          StringField3          StringField4          StringField5Does AEM support this nested object structure in swagger? If so do you have an example swagger file that demonstrates the correct syntax. If not, what is the alternative? Add a key to each data structure and link them? Thanks, James

Hi everybodyI have an Adaptive Form and I populate a dropdown list with a get-service defined in a Form Model in Data Integration sectionI made a rule on an input text field ( on Value Commit -> call the service and get data -> populate the dropdown list with data )If I update a record in the database and I call again the service, the json that I receive doesn't update! :-(I checked on the db and the data are updated, but I can't figure out how to see the update in my serviceAny suggestion??Thank you everyone!!Fabio

AEM Forms 6.3.0 initialization failed with below error , is the WebLogic 12.2.1.3.0 version supported with AEM Forms 6.3.0 ?Caused by: com.adobe.livecycle.bootstrap.BootstrapException: ALC-TTN-103-000: Bootstrapping request failed on server.  Message from server:ALC-TTN-011-003: Bootstrapping failed for platform component [UserManager].  The wrapped exception's messagereads:Failed to load default configuration. error:javax.ejb.EJBException: EJB Exception: : java.lang.RuntimeException:nullgetProvider failure: factory not initialized        at com.adobe.idp.config.AdobePreferenceFactory.systemRoot(AdobePreferenceFactory.java:178)        at com.adobe.idp.config.PreferencesBean.importConfigNodeFromXML(PreferencesBean.java:339)        at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.__WL_invoke(Unknown Source)        at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:33)        at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.impor

Hi Guru's ,I'm currently exploring AEM 6.3 forms and trying out a usecase to invoke a rest endpoint on click of a button .I achieved this use case in AEM 6.2 via code editor where on click event I was excuting a peice of java script code which would make a ajax style call to rest API and render the response .I'm trying to see if there is any better way to acheive this in AEM 6.3 . I do not have the swagger file for the REST API and it is a third party service . Will i still be able to use Forms data integrations ? Or Is there any GuideUtils API to invoke rest based endpoints or java script way is the best to go  ? I found the article below  to execute SOAP based services , however couldn't find any thing similar for rest based calls ?AEM 6.2 Forms Help | API to invoke web services from adaptive forms Thanks in advance

Hi all,Is it possible to convert a pdf form created in Acrobat Pro DC to a editable form in AEM Forms? I want to be able to add/remove text fields to this converted form in AEM Forms. If someone could link me to a solution that would be greatly appreciated.

I have installed AEM Forms 6.4 on Windows Server 2012 R2 using partial turn-key installation with SQL Server 2012 database. First time installation and configuration completed successfully. But if I subsequently want to change my DB settings and run Configuration Manager, it fails on the following step:In the Configuration Manager log, I found the following error entry:Caused by: com.adobe.livecycle.lcm.core.LCMException[ALC-LCM-000-000]: Replacement failed for '>jdbc:sqlserver://localhost:1433;DatabaseName=adobe<' with '>jdbc:sqlserver://[my_sql_hostname]:1433;DatabaseName=[my_db_name]<'Well obviously lc_turnkey.xml does not contain the string jdbc:sqlserver://localhost:1433;DatabaseName=adobe anymore, hence I found the following workaround:After the initial installation and BEFORE Configuration Manager runs for the first time, save somewhere the original version of lc_turnkey.xml.On subsequent runs of Configuration Manager, delete lc_turnkey.xml and replace it with the or

I'm trying to populate a text field on the Master Page of a form by having it populate as a user types data into a text field in a content area.  So far, I have it populating when the user puts the cursor into the Master Page text field and then leaves that field after typing data in the text field in the content area.  I want the text field in the Master Page to populate as the user types in the text field in the content area, so it looks like both fields are being filled simultaneously.The script which now populates the text field in the Master Page is this.rawValue = MNPD.Form130.Page1.CSIInfo.CPN.rawValue;This script is in the Enter, Exit, Calculate and Validate events of the Master Page text field. I suspect that I am not correctly referencing the Master Page text field when trying to put a script in the content area text field events. From the Hierarchy, the Master Page text field is   MNPD > Master Pages > PageArea1 > CPN and the text field in the content area isMNPD &g

I am creating a dropdown list - where users can choose the proper year of business.This dropdown needs to be customized to the user: Values begin at the year the business began to generate hazardous wasteI need to add values for each year - up to the current year.I want the current year to be calculated instead of static.How do I add values to a dropdown list?In LiveCycle - I would do something like this:     for (var i=dateBaseYear.rawValue; i<=dateCurrentYear.rawValue; i++){//console.println(i);this.addItem("" + i); //needed to add a string in front of 'i'.  not sure why}Is there a similar solution for AEM Forms?

     Hi All,I have created some letters in AEM Forms using Correspondence management feature in AEM Forms 6.3But Submit button is not getting enabled to submit it to a workflow even though I have selected a Post process workflow.Regards,Sobhan

When a PDF document is protected with a security policy from LiveCycle ES or AEM Forms, it can only be opened by Adobe Reader. Here's what it looks like when you try to open it in another PDF viewer.Microsoft Edge:Firefox (internally uses PDF.js):But I have seen secured PDF documents that in other viewers show customised content - e.g. instructions to download and install Adobe Reader. So there must be a way to add unprotected content to protected PDF files, which other PDF viewers will display. How can I do it?

Submitting the form does not submit when the "File Attachment" adaptive form component exists on the adaptive form. No logged in users are proceeded, the form is published, and the submit action is the simple out of the box email submit action.On submit, in the network tab, I can see that the HTTP Request URL stops at /content/forms/af/my-test-adaptive-form/jcr:content/guideContainer.af.internalsubmit.jsp. Typically on a successful submission, the HTTP Request URL should go to /content/forms/af/s/jcr:content/guideContainer.af.submit.jspI performed some tests:test 1: logged in as admin- works perfectlytest 2: logged in as test-user; this user is a member of form-user group- works perfectlytest 3: anonymous user (not logged in)- like the description above, the HTTP Request URL is stuck /content/forms/af/my-test-adaptive-form/jcr:content/guideContainer.af.internalsubmit.jsptest 4: anonymous user (not logged in); his user is a member of the administrator's group- like the description above

In our AEM Forms 6.3 J2EE environment we are using the LiveCycle EmailService succesfully.Now, for another process, we want to use the Day CQ Mail Service also.After submitting the adaptive form to the com.day.cq.mailer.DefaultMailService  we get an error:Error during include of component '/libs/fd/af/components/guideContainerWrapper'Error Message:java.lang.LinkageError: javax/mail/SessionIt seems there is a conflict with the two different EmailSerivces?

java.lang.LinkageError: loader constraint violation: when resolving method "com.sun.mail.util.PropUtil.getBooleanSessionProperty(Ljavax/mail/Session;Ljava/lang/String;Z)Z" the class loader (instance of org/apache/felix/framework/BundleWiringImpl$BundleClassLoader) of the current class, javax/mail/internet/MimeMessage, and the class loader (instance of org/jboss/modules/ModuleClassLoader) for the method's defining class, com/sun/mail/util/PropUtil, have different Class objects for the type javax/mail/Session used in the signatureI have a custom email service that uses the JavaMail API. On a non-JBoss instance, it works fine. On JBoss, it runs into the LinkageError above.I can't resolve the LinkageError through normal channels, because a critical class is not loading in the usual way:!! com.sun.mail.util,version=1.5.0 -- Overwritten by Boot DelegationThe JavaMail bundle exports javax.mail and com.sun.mail.util, but the latter is being overwritten by boot delegation and picking up the JBo