Adobe Experience Manager Sites

Hi,   I am reaching out regarding an issue we are experiencing with sending assets via email. Unfortunately, we are encountering a CORS problem in console, which prevents us from successfully mailing the assets. We are using asset share commons for assets management but in author email service is working on but on publisher it is giving CORS issue. We have already updated all the necessary configurations and dispatcher updates but still getting same error. Interestingly, we faced the same problem on both the DEV and QA environments. However, we managed to resolve the issue on the DEV environment, yet the problem persists on the QA environment, even though the code remains consistent across both environments. I have extensively referred to relevant documentation to find a solution, but so far, it hasn't led to the desired outcome. We would greatly appreciate any insights or suggestions you might have to help us resolve this issue.         Error   Acc

Hi, when you create a language copy for a site, through a translations project, all the links to pages to the same site are translated to the new language copy site. For example: my original site is: /content/my-site/en/... and my new language copy is: /content/my-site/es/...so, all the links to other pages inside /content/my-site/es/... will be translated from /content/my-site/en/... to /content/my-site/es/...My question is: How can I do an automatic translation of the links to experience fragments?in my pages inside /content/my-site/en/... I have links to  /content/experience-fragments/my-site/en/...in my pages inside /content/my-site/es/... I still have links to  /content/experience-fragments/my-site/en/... instead of links to /content/experience-fragments/my-site/es/...

When the main navigation or a content fragment on home page is updated(not published) , the home page gets published automatically and it shows that the author published it. But the author did not publish the page.

For the thread -https://experienceleaguecommunities.adobe.com/t5/adobe-experience-manager/language-copy-issue-with-experience-fragments-references/m-p/604261#M151496I see in replies section - This issue is resolved in the AEM 6.5 Service Pack 12 (NPR-37953).We are using AEM version 6.5.16.0 but we still see the same issue.No experience fragments associated on the pages are getting added/ or reference updating on the language copy pages.Is there any else configuration is required to add? We have translation rules configured as well but still no luck.Also I tried with adding one more process step to WCM: Translate Language Copy workflow to translated experience fragment links but this workflow never triggered while creating translation job and adding pages from Project Console and Create option under Sites console.Please help.

Hi everyone! I'm doing Splunk certification and working with Adobe Experience Manager (AEM) and trying to implement a custom workflow. I'm having trouble understanding how to properly configure the OSGi settings for my specific use case. Can anyone share some guidance or best practices on configuring OSGi in AEM, especially related to integrating with third-party services? I already check this post https://experienceleague.adobe.com/docs/experience-manager-65/deploying/configuring/configuring-osgi.html?lang=enAny insights or resources would be greatly appreciated. Thanks!

i am seeing below warnings while building aem app. Any suggestions?[main] WARNING org.sonatype.plexus.build.incremental.DefaultBuildContext - /builds/site/core/pom.xml [0:0]: Invalid component name: Reform Cache Service [main] WARNING org.sonatype.plexus.build.incremental.DefaultBuildContext - /builds/site/core/pom.xml [0:0]: Export com.site.core.models, has 1, private references [com.site.core.pojos] Thanks,Sri

Hi All, In author mode, I am trying to get the classes defined in the policy for experience fragment template but not able to. Tried using the method "cssClassNames" of com.adobe.cq.wcm.core.components.models.Page but no luck.Same seems to be the case in wknd project as well. Anyways it will not be of any use for experience fragment once moved to target but will help the content authors to author content on XF with styles in place. Any suggestions to enable the style system or get the classes defined in policy for experience fragment template will help. Thanks

Hi, I want to write a query in SQL2 to search through content fragments under /content/dam/testProject/content-fragments/en_us which is created using a specific template. In this query I also need to make sure that a property, myProperty contains a string "test". I have to make sure that the search is case-insensitive. I wrote the following query: SELECT * FROM [dam:Asset] AS asset WHERE ISDESCENDANTNODE(asset, '/content/dam/testProject/content-fragments/en_us') AND asset.[jcr:content/data/master/isFeatured] = true AND LOWER(asset.[jcr:content/data/master/myProperty]) = 'test' ORDER BY [jcr:score] DESCThis is not working as expected. I also tried the following:SELECT * FROM [dam:Asset] AS asset WHERE ISDESCENDANTNODE(asset, '/content/dam/testProject/content-fragments/en_us') AND asset.[jcr:content/data/master/isFeatured] = true AND CONTAINS(asset.[jcr:content/data/master/myProperty], 'test') ORDER BY [jcr:score] DESCThis does not work either. Please note,

In Unit Test, @ChildResource annotation property always return null. Can anyone please guide me to resolve the issue?Environment Details: AEM 6.5.16 and Java 11CountryListImpl.java @Model( adaptables = SlingHttpServletRequest.class, adapters = { CountryList.class }, resourceType = CountryListImpl.RESOURCE_TYPE, defaultInjectionStrategy = DefaultInjectionStrategy.OPTIONAL ) @Exporter( name = ExporterConstants.SLING_MODEL_EXPORTER_NAME, extensions = ExporterConstants.SLING_MODEL_EXTENSION ) public class CountryListImpl implements CountryList { protected static final String RESOURCE_TYPE = "aem-demo/components/country-list"; protected static final String COUNTRY_LANGUAGE_LIST = "countryItems"; @ValueMapValue @Named("title") String defaultLabel; @ChildResource(name = COUNTRY_LANGUAGE_LIST) List< CountryItem > countryList; public String getDefaultLabel() { return defaultLabel; } public List<Countr

To add any custom class and attribute to the dialog element we use granite:class and granite:data respectively. It works fine for Coral Textfield, Select, etc. I tried to implement the same for Tab Placeholder, but class and attribute not available on HTML for Tab. <_x0031_689938985967 jcr:primaryType="nt:unstructured" granite:class="tab-container" sling:resourceType="dam/cfm/models/editor/components/tabplaceholder" fieldLabel="Blog Post" listOrder="21" metaType="tab-placeholder" name="placeholder" renderReadOnly="false" showEmptyInReadOnly="true" valueType="string/tab" />Is there any other way to add custom class and attribute to the Tab Placeholder?  

Hi there, I am wondering if it is possible to set AEM's 12 columns grid inside of a Container component? The default behaviour on AEM Cloud only allows resizing on the remaining columns when we shrink the container, like the six columns below for the image component inside. But I want it to start with a new 12 columns inside the Container.   Thanks

Relatively new to AEM Assets, and looking for assistance with HTML email file sharing.  We design emails in HTML, and host the images on AEM. Is it possible to share a link for the HTML file where a user could open that link in a browser?  In my mind, this would work similarly to the dynamic renditions link that we use to host the images. 

Hi Everyone,              I have a requirement - In test dropdown component I have two fields ingredient name(select field), quanitity. Ingredient name field dropdown values should be fetch from content fragment.           In the content fragment I have configured ingredient name as multifield, values are fetching properly from cf and also displaying. But the problem is above the dropdown field I am getting servlet response(json array values). Can anyone help me to resolve my query asap.          Thanks in advance. Here below I will post my implementaiton code. @shiv_prakash_patel  @mani_kumar_  @veena_vikraman  @aanchalsikka @arunpatidar  Servlet code:package com.itc.foods.brands.core.servlets;import com.adobe.granite.ui.components.ds.DataSource;import com.adobe.granite.ui.components.ds.SimpleDataSource;import com.adobe.granite.ui.components.ds.Va

How to Test a Multifield Component in AEM using JUnit by Veena Vikraman Overview In the Experience Community, there was a question about how to write JUnit for a multifield in an AEM component. Many of us struggle with JUnit in AEM due to its complex APIs and annotations. However, except for some scenarios, JUnit in AEM is not that complex. Read more on how you can write Junit for a Multifield Read more  Q&A Please use this thread to ask questions relating to this article

During bulk activation , the flush agent queue are getting piled up and slowly moving. Due to this , the latest content is not visible in the site immediately. What are the possible reasons for slowness in flush agent when authoring team doing bulk activation.  The slowness observed recently past 4 month post sp16 upgrade.  

The form throws an error when submit button is added.  This issue is before the form submission itself. (when I try to preview, get blank page where NullPointerException is thrown). The form works fine without the submit action.Note: Using the right form adon package.caused by: java.lang.NullPointerException: nullat com.adobe.aemds.guide.common.GuideContainer.createGuideInitializationState(GuideContainer.java:1000)at com.adobe.aemds.guide.common.GuideContainer.getGuideInitializationState(GuideContainer.java:1047)at org.apache.jsp.libs.fd.af.components.guideContainer.guideContainer_jsp._jspService(guideContainer_jsp.java:959)at org.apache.sling.scripting.jsp.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)at javax.servlet.http.HttpServlet.service(HttpServlet.java:764)at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:502)... 351 common frames omitted   Many thanks in advance

I have a component that has its cq:dialog file, something I need to do is to perform some validations based on the selected dropdown value. I already have the logic but what I can't get is to obtain the selected value of the dropdown of the cq:dialog I already tried using: -- let dropdownValue = $('#sliderTypeValue'); -- let dropdownValue = $('#slideType'); -- let dropdownValue = document.querySelector('#sliderTypeValue'); -- let dropdownValue = document.querySelector('#slideType'); -- let dropdownValue = document.querySelector('#cq-dialog-dropdown-showhide'); -- let dropdownValue = $('#cq-dialog-dropdown-showhide'); But none of them brings me the value of the the dropdown field on cq:dialog authoring. What can I do in this case?This is the cq:dialog dropdown I create:<slideType                                      &nbsp

Dear All, We are currently in the process of planning an upgrade to AEM 6.5.17. When building the code with latest uber jar 6.5.17, I've encountered a compilation issue related to the class "com.day.cq.dam.handler.standard.pdf." Upon investigating the issue, I found that the manifest file of the "Uber-6.5.17.jar" is exporting the package "com.day.cq.dam.handler.standard" with version 5.8.2, which does not actually exist in the repository (https://repo.maven.apache.org/maven2/com/day/cq/dam/cq-dam-handler/). To address this, I attempted to manually add the dependency for "cq.dam.handler" with the latest version 5.7.8 to the POM. Though build was successful but it resulted in breaking our customer application bundle, as it introduced numerous missing dependencies. It seems that this issue with the Uber JAR referencing the incorrect version of "com.day.cq.dam.handler.standard" might be a general problem. Has anyone else on the team encountered a similar issue? Your support

In earlier versions of Sling Models the use of the annotation @586265 was suggested and documented; but over time it turned out that it had some major issues Please read the post on below URL  https://aemhelper.blogspot.com/2023/08/inject-discouraged-sling-model.html Happy Reading...!  

Hello,I'm trying to generate a Cloud Manage API access token to eventually automate some Adobe I/O CLI commands. This automation will eventually be run from AWS Lambda to send AEM access logs to AWS S3 so we will not be able to authenticate manually.Eventual commands to automate at minimum:aio cloudmanager:environment:download-logs ENVIRONMENTID SERVICE NAME [DAYS]aio cloudmanager:environment:tail-log ENVIRONMENTID SERVICE NAMEUsing this Github content to setup authentication:Using Service Account Authentication, not Browser-based.https://github.com/adobe/aio-cli-plugin-cloudmanager/blob/main/README.mdAdobe I/O CLI already installed. I've setup a (JWT) Service Account with a Cloud Manager API and generated a private/public key pair. I've updated the relevant values from the JWT service account in a config.json file as described. //config.json { "client_id": "value from your CLI integration (String)", "client_secret": "value from your CLI integration (Strin

Hello, what happens is that I have a custom component that is a slider, this component has a dropdown in the part of the component configuration in authoring (cq:dialog) that allows the user to select 1 of the 3 variations of the slider. But what happens is that if the user selects for example the variation 2, add the configuration (image, text, etc) and saves it the component show the configuration that the user add, but if the user returns to the authoring mode of the component and selects the variation 1 can enter the information again but the information of the variation 2 remains saved in the cq:dialog although it's not used.Is there any way that when my user selects another dropdown option the settings of the other variations are removed?

Hi All, I having a issue with content fragment composite multified, currently we having the composite multifield in a content fragment working with custom JS functionality, So this Multifield JS functionality is affecting the existing functionality in our project, Is it possible to create a composite multifield in content fragment like in the screenshot with out any Custom JS? If any one having any idea kindly let me know to solve this issue.  ThanksNandheswara

Since the latest windows 11 (Arm) update, im unable to run the LiveCycle Designer (Version 11.0.9.20221102.1.37) anymore. I see the splashscreen and then the program quits with no error message. I tyed to use the windows repair function for non running apps and also played with compatibility settings, with no success.Any idea? 

Whenever someone tries to download a folder of images in our brand portal no dialogue box pops up and it will only download ALL of the default renditions rather than any of our smart or user defined crops of the images. We have individuals that are needing to download hundreds of files at a specific size, which we have set up both in smart crops and as an image preset.  We basically need something to the effect of "I want to download this whole folder of images and I only need one predetermined size of each image" Is there a way to do this and if so, how? Thanks!