Product Communities

we are analyzing total logged in users v/s new users logged, we created a segment where visit =1 at visit level and another visit =1 at visitor level which is accurate ?

Hi,  We currently are having due dates that vary on projects between time zones (IST vs MST/EST) that throw off deadlines and in our instance we have specific schedules for the 2 as well as exception dates (holiday calendars). We thought we had found a solution under the project preferences when working with Workfront support and for awhile things seemed to work. However, recently we are now seeing the same schedules issues occurring and different due dates in different time zones that are causing items to be late. In a recent example we had the Diwali holiday fall in between the duration of a task and because of this exception date it pushed this task due date further out then just the time zone. When working with Workfront support on this recently example, they advised that the schedules are working as they are set to, which is fine, their recommendation was to have our Global teams set there work laptops to the home office time zone and this will not cause delays in p

Does anyone have any good recommendations for comparing task planned hours vs. actual hours at the daily level for a specific user? I'm seeing all the pieces I'd need in isolation, but can't figure out how to bring them together into the WLB or a report: I can see actual hours logged against a project/task per day via a reportI can see planned hour allocations per day via the Workload Balancer But I can't see actual hours in the Workload Balancerand I can't drill the Planner down to individual daysand I can't pull the planned hours allocations from the WLB per day into any reports Barring something native in WF, does anyone have recommendations on third-party scheduling tools that Fusion can easily pass data into?

Smaller, Smarter, Smoother: Optimizing Video Delivery with AEM Dynamic Media Adaptive Videos From immersive product showcases to engaging brand stories, video content drives user engagement and conversion. According to a 2025 study, 95% of marketers now use video as a core part of their digital strategy, and 93% report positive ROI from video marketing. However, delivering high-quality videos across diverse devices and fluctuating network conditions remains a challenge. In a study conducted way back in 2012, Sitaraman and colleagues found that each additional second of load time beyond ~2 seconds increases the probability of the viewer abandoning the video by approximately 5.8%. While this study dates to 2012, its relevance persists, especially in 2025, where viewer expectations for instant playback are even higher. In this blog, we will experience together, with a demo, how buffering impacts user experience and how AEM Dynamic Media addresses it. To be specific, we will

I have created a Fusion scenario to add a new item to a list in sharepoint.  All fields populate as expected except Requestor which is a Person or Group Type.   If I subsequently edit the item directly in the sharepoint list, I can enter the same name I pass from Fusion, the name is found and after I select it the field is populated.   My feeling is that sharepoint is expecting a specific format for the name but I'm unable to determine what is expected.   Fusion ModuleMicrosoft Share Point Online - Create An Item Fusion Module item Key format Sharepoint List Field 

The new VEC UI seems to have made things even harder for those that aren't developers. Previously, there was the ability to move elements on a page. I can't find how to do this on the new UI.  Anyone have any idea? thanks

When copying the link to a project, (or task, or anything in Workfront), it used to paste into an email, teams chat, or excel doc (or anywhere else) as the title to the project. Now, it shows experience.adobe.com... etc. and a random box without any relevant information shows.  Is this something that will change? Why does it have to be like this? 

Hi, I'm looking to use a custom metric and apply attribution settings to it, but the non-default attribution settings only work on metrics within the Data View. How do I create a metric within Data View that is counting distinct dimension values, so that I can apply non-default attribution settings within workspace? Right now, it seems like I can only count metrics at the event level (row count with the value) or Session or People. But for cases like application IDs where we want to attribute each instance of an app ID to an upstream touchpoint, I would need a distinct count metric. Thanks

Hi All, I have a requirement to do not allow a user based on their permission to change components disposition in a page (eg: move banner from the 1st position and close to the header, to the last position, close to the footer). However, users with proper permission could be able to do this. I not finding any type of permission that gives me this. Anyone has ever seen something like it? Thanks,

Could somebody confirm?

I am having an issue where I have users assigned to tasks however their hours are showing zero. This changed when I updated the task assignments to be their job role names instead of their actual user name because I am working with 300+ projects and want to resource level. Any insight into why their hours might be showing zero if they're assigned to a task with hours? Also note that each of the project tasks are set to start and end during work hours. 

hi,We have a requirement to customize the digital forms on AEM 6.5 based on each customer.Currently, the AEM is placed within the intranet and is not accessible by anyone outside.Once AEM publish is placed outside intranet, and can be accessed by the customers, and we have a requirement to capture customer details. I am looking for different ways to authenticate AEM publish, without using LDAP or SSO , as the users are typically external customer and not employees.Kindly suggest different methods. Thank you.

Hello community,I’m trying to configure OAuth Server-to-Server authentication to access the AEM Assets Author API, but I’m getting a 403 Forbidden error when making requests. I’ve followed all the configuration steps, but it seems like I’m missing something.Here’s what I’ve done so far:Created a project in Adobe Developer ConsoleAdded the API: AEM Assets Author APISelected authentication type: OAuth Server-to-ServerConfigured the credentials correctlySelected the correct Product Profile:AEM Administrators - author - Program 123456 - Environment 1234567This profile has the following services enabled: AEM Administrators and AEM Assets APISuccessfully generated the access token (successful response confirmed).Made the API request example: curl -X GET \ 'https://author-p123456-e1234567.adobeaemcloud.com/api/assets/content/dam.json' \ -H 'Authorization: Bearer eyJhbGci...' \ -H 'x-api-key: 504220494ec74541afabd9541f47e2e1' \ -H 'Content-Type: application/json' The problem:I’m getting a

https://experienceleague.adobe.com/en/docs/journey-optimizer/using/campaigns/orchestrated-campaigns/design-campaigns/deduplicationDoes this functionality work with email and SMS activity in Journeys? I cannot find this. This is important for me

In my dispatcher_httpderror log, I keep getting the following messages. Fri Oct 10 23:59:24.646793 2025 [managed_rewrite_maps:debug] [pid 123] [cm-p123-e123-aem-publish-123] Managed rewrite maps check in progressFri Oct 10 23:59:24.650947 2025 [managed_rewrite_maps:debug] [pid123] [cm-p123-e123-aem-publish-123] No managed rewrite maps configuredFri Oct 10 23:59:24.655150 2025 [managed_rewrite_maps:debug] [pid123] [cm-p123-e123-aem-publish-123] Managed rewrite maps check DONEFri Oct 10 23:59:24.659466 2025 [managed_rewrite_maps:debug] [pid123] [cm-p123-e123-aem-publish-123] Waiting for 30 seconds for next managed rewrite maps check I am not using any Apache RewriteMap directive on my setup.These errors pollute my log and have no value, how can I get rid of them?And I want to keep the debug level, so that I can see the REAL errors 

I have multiple engagement programs set-up which have been running for a few years. I want to have a list of all emails that are currently active within those nurturing programs. How can I pull it out?

We have 100's of old document (not proof) approval requests in Workfront that are either no longer needed. Ideally, I'd like to cancel them all, but I'd especially like to start with cancelling the document approval requests that are between users that are no longer with our company (so both the requestor and the approver are no longer active in Workfront) because at least in that scenario, no one would get an email notification that their document approval request has been canceled. I would then follow-up with a scenario that I could use to capture stale requests between active users (or a mix of active users and inactive users, depending on which side of the approval they are on), and I would temporarily turn off the "document approval request has been cancelled" notification emails for active users. Would anyone be able to explain to a Fusion newbie (and I mean newbie, I have only had Fusion for 1 month) what scenario I could write to attempt this?