Product Communities

機能改善要求（RFE）概要： In the current UI, the sidebar cannot be expanded horizontally, preventing the full display of query names. I would like to have the ability to see the full list of query names, perhaps by allowing the sidebar to be expanded horizontally. 環境の詳細（AEM バージョン／サービスパック、もしあればその他の詳細）： AEM Release: 2024.7.17098.20240711T134106Z スクリーンショット（ある場合）

ISSUE: PROOF FUNCTIONALITY TAKES FILES OUT OF SOURCE FORMATWhen using the proofing functionality, anything besides a PDF (e.g., Word DOC, Figma FIG, Powerpoint PPT) all get converted to a PDF therefore losing the working file so the agency must continually take feedback from a PDF and go back to the source document (Word DOC, Powerpoint PPT, etc). and reincorporate the feedback, creating room for error and missed feedback versus accepting, declining changes etc. Conversations about the document are essentially happening outside of the working file when we use proofs, creating additional work for the agency team.This creates a scenario where the agency is Referencing to “printed” PDFs to manually cross-transfer comment input back into source document creating risk because the team is working in multiple filesImpact: High impact for all projects, high risk for errors, creating additional work for project management and creativeIdeal solve: documents uploaded as a proof would re

Description - Ability to update the project template association on a projectWhy is this feature important to you - We have built a lot of our content operations reporting based on the project template associate (asset type). How would you like the feature to work - We are currently working on a thought leadership piece that we initially thought was going to be a blog, so we leveraged out blog project template. The content has evolved and is now a full blown Viewpoint piece, which uses a different set of tasks to get to done. So, now the asset type on this piece will not appear correct in any of our content reports. Current Behaviour - We originally created this project: https://experience.adobe.com/#/@cgi/so:cgi-Production/workfront/project/66463d4f00258653b6af4b0d132cfb31/tasks originally using our Blog project template but it's now a Viewpoint. So, this Viewpoint (now) reports as a Blog, even though it's no longer a blog. We now have to create a new project and hope i

We would like to see an option that the whole project is read only after it's completed so new comments can't be left unless the project is reopened by an admin. We have had several users that go into a completed project and want to make changes so they leave a comment in the updates and/or on the proofs and just expect us to know they did that, without any tagging. 

I have noticed that a "Rejection comment" field is available in the Hour schema, but at this time there is no way to add this comment through Workfront interface; this has been confirmed to me by a Workfront support representative. We can add the field in a view, but users have no way to enter information in it! In my company the ability to add a rejection comment is important for the timesheet/hour approval process, and now users are forced to add information to the hour description, mixing the rejection comment with the hour description entered by the hour owner, which is far from the ideal situation.It would be enough to add a textarea in the hour edit window, since it seems that the Workfront database already has the field available, so this should not be a very time-consuming feature to add.Thanks for your attention!Andrea Benfenati

Now that we can create custom objects, it would be very efficient to be able to create custom object flows through flow steps, exactly as we can do with tasks.For each custom object defined in the admin, we would need 3 flow steps:Create (would take all the fields as input)Update (would require the UID + the fields to be updated)Delete (would required the UID)The create/update could also be replaced with 1 upsert one.Obviously, if it's a SFDC custom objects, the fields available would have to be set through mapping.With regards to Marketo custom objects, all fields created in Marketo should be available to be set in the flow steps.All the fields of the custom objects could be set with tokens.Typical usage : I create a custom object : product interest, with a few fields (Time frame, quantities). I Create the same fields at lead level, that I use in a form. Once a lead fills out the form, I create a custom instance and populate the fields with the lead tokens.We should also be able to up

New possible duplicate records could be found by adding new fields or combination of fields in the "Duplicate Fields" filter.Besides the existing ones, we believe the following ones would help detect duplicates:1- Mobile Phone Number2- LinkedIn Profile URL3- Combination of First Name, Last Name and Company NameAnd we understand the level of complexity of doing so should be relatively low.

We would love the ability to limit smart assignments on tasks to only users who have Work/Plan licenses. All of our review/request users also pop up as suggestions, which clutters the smart assignments and sometimes leads to mistakes as the wrong person gets chosen easily. They often even pop up as the first and/or second option where Work/Plan users get pushed down the list. This would speed up time assigning tasks and minimize room for error in assigning an incorrect person.  Thank you! 

Current Behaviour -Presently, when sharing a proof, the proof appears as though it is coming from the user who shares it, as it inserts their email in the 'from' and 'reply-to' sections.How would you like the feature to work -We want better control over the headers and bodies of emails leaving Workfront proof, especially around the 'from' and 'reply-to' fields. This needs to allow us to use proof's email sharing as a 'no-reply' address.Why is this feature important to you -The current method of working increases administrative burden on our teams, as external users respond to the emails directly, rather than adding their comments to the proofs. It also limits who can share proofs with a client, as having non client facing users uploading/sharing proofs can cause confusion, especially if email replies are sent directly to them.

Hi Marketo Team, Currently the MSI package upgrade versions are not covered in the marketo release notes and no intemations are given to the markto admins to plan the MSI package upgrade. Admins have to keep checking the MSI package in the appexchange to plan the upgrade. It will be good if marketo publish the MSI  release schedule dates and versions in advance to all the markto admins. Thanks,Santhosh. S 

Request for Feature Enhancement (RFE) Summary: Native AEM Assets Integration with Salsify Use-case: Push assets from AEM DAM to Salsify to syndicate content to retailers. Push assets from Salsify  Current/Experienced Behavior: Manual push of assets from AEM DAM to Salsify, and from Salsify to AEM. Suppliers are providing product assets to SGWS via Salsify. Manually pushing that product content to AEM Dam. For other assets in AEM, manually pushing assets to Salsify via sFTP.  Improved/Expected Behavior: 2-way API integration between Salsify and AEM to push assets to Salsify (based on publish status ideally, but configurable). AEM receives product assets based on status in Salsify. Environment Details (AEM version/service pack, any other specifics if applicable): AEM Cloud Service Customer-name/Organization name: Southern Glazer's Wine and Spirits Screenshot (if applicable):   Code package (if applicable):  

Description - Within the existing Board design, the Intake column does not display the Due date of the Task or Issue on the face of the card until it is brought into a main column. Nor is that column sortable by any of the same options supported for the rest of the columns that have been created, even as a partial solution. This makes it a barrier to user adoption, as they have no way to understand what is being asked of them first without opening each card in the Intake column to find the information. Why is this feature important to you - For any team or individual trying to manage their workflow on a Board, the ability to quickly understand 'what is being asked for first'? is critical to the usability of the Boards. Without that easy visibility, teams may prioritize discussions about items that are not as time sensitive as something later in the list. For any team or individual with more than a handful of work requests, this is simply unrealistic to expect and they are switchin

Description - Currently when viewing the blueprint page you are shown an "install" button and a "details" button. Upon first glance it appears as though this hasn't been downloaded to the system yet. The only way to find out that the Blueprint was installed is to click the "details" button which isn't intuitive for some end users.  Why is this feature important to you - Users are requesting downloads of objects that have already been implemented and don't have a way to see that easily. This causes duplicate work for system administrators. How would you like the feature to work - Instead of "install", once it's installed change the button to something else or add a new button. Current Behaviour - have to click into details to see that it's been downloaded.      

ISSUE:  WF proofing functionality does not allow for a PPT document to be uploaded as a proof and both the slide and the speaker notes content be visible and commentableThis creates a scenario where the agency has to upload 2 versions of a PPTV1 - PPT simply as a document, not a proof, that is just for viewing the deck in full view and sizeV2 - PPT saved as a PDF in “Notes Version” with a thumbnail of the slide and speaker notes showingAll comments are requested to be put into the proof “notes version” for trackingImpact: High impact for all projects, high risk for errors, creating additional work for project management and creativeIdeal solve: A way to upload PPT as a proof that did not need to be converted to a “notes version” where both could be seen and commented on without a change in format 

Description - Bubble data with similar data points in bubble charts overlay on each other, making it impossible to read the writings on the bubbles and distinguish between them in any way. Why is this feature important to you - users need to be able to read the informaiton shown on the charts. Otherwise the chart is of no use. How would you like the feature to work - I would like the writings of informaiton on the chart be readable clearly and if two items have similar/close data they be distinguishable on the chart, at least after clicking on the bubbles. Current Behaviour - It is impossible to read the bubble on the bubble chart; writing shows as many words written on top of each other and scratchy. 

Description - Bubble Chart Reports Groupings that are custom statuses should show the custom status label(name) and not the system default one. Why is this feature important to you - Presenting different names for statuses creates confusion among report audiences. How would you like the feature to work - Chart Reports Groupings that are custom statuses should should show the custom status label(name) and not the system default one. Current Behaviour - Chart Reports Groupings that are custom statuses show the system default status name rather than the custom status name..

Hi Adobe Team / @amelia_waliany ,While reviewing the documentation for switching experiences in XT activity available at Experience Targeting Documentation, I noticed that the behaviour described for single-experience XT activities doesn't seem to work as expected. Specifically, the document mentions that "Visitors remain in an experience even if they cease to qualify for the audience that put them in that experience."To verify this, I conducted a POC, and the results were different from what is outlined in the documentation. I have recorded a step by step video demonstrating my findings, which I have given below for your review.Guideflow interactive demo Please let me know if I am doing something wrong here, or if the documentation might need to be updated. If the latter is the case, I kindly request that this point be corrected.Looking forward to your feedbacks.Best regards,Vaibhav Mathur

Right now, in order to unarchive an Archived activity users need to Edit the activity and hit Save and Close. This flow is counter intuitive because users not precisely intend to do a change in an Archived activity, they might just want to bring it back to Inactive status, and it requires more steps than actually needed to change the status. As users, we expect to easily choose one activity from the Activities List and click on the Unarchive button.

What is the current situation? I currently have the problem that redirectOffers are running in Activities on a page with the WebSDK (asynchronously via Adobe Launch / Data Collection). The preHiding snippet is also used. Yes, at the first alloy sendEvent the style with the id alloy-prehiding is removed accordingly. But this is unfavorable for redirect offers because the page may be displayed before the redirect takes place.   To fix this, I have currently built this workaround. I make an alloy sendEvent in Launch. I also pass the desired data to AT. What is new now - is that I additionally check in the promise with .then whether has_schema(data, “personalization/redirect-item”) contains. If this is the case, I know that this is a redirect offer and insert an additional hiding. In this case, not the default document.body.style = “opacity: 0;” - but that I only use the cmp-container and page-wrapper style classes in my setup here. I also do not insert the id alloy-prehiding here. As

ISSUE: PROOF DOWNLOAD/PRINT FUNCTIONALITY – FORMAT OF COMMENTSAgency Project Managers are the gate keepers of the feedback, ensure all feedback is in and actionable, then download to share with the creative and strategy teams for next stepsThe issue is that neither version available for download using the “print” function are ideal for feedback review – and we end up pulling both versions down and our creative & strategy teams manually toggle between both to transcribe feedback back into the source document. Below are the issues with the different formats:Proof > Print > Print as PDF: Challenging to read. Lengthy comments stack on top and it is hard to see final direction. Comment thread numbers are referenced in comments, but not visible in this view. When comments are not tagged to a specific spot they float. This version takes a significant amount of time to arrive in Outlook inbox and often causes delay.Proof > Print > Standard print (Green Button): Challenging to r

It would be amazing if I could request calculated metrics in a report.queue API request to DataWarehouse, as in:{   "reportDescription":   {      "reportSuiteID": "some_suite_id",      "dateFrom": "2017-11-01",      "dateTo": "2017-11-01",      "metrics":      [         {"id": "cmSome_CalculatedMetric_ID"}      ],      "elements":      [         {"id": "some_prop"}      ],      "source": "warehouse"   }}

Description - When filter of a chart report is changed through the Details tab, only the data in the Details tab of the report updates and not the data shown on the chart. Why is this feature important to you - Report tabs show different data. How would you like the feature to work - When filter of a chart report is changed through the Details tab, the data show in the chart should change as well. Current Behaviour - When filter of a chart report is changed through the Details tab, only the data in the Details tab of the report updates and not the data shown on the chart.

Resumen de la solicitud de mejora de funciones (RFE): It is very complicated to choose a thumbnail in a video, especially those of long duration, or through the “Select Frame from video” option. Caso de uso: As an author, I need to be able to easily and quickly choose the thumbnail of my videos through the video itself. Comportamiento actual/experimentado: Currently, AEM offers two ways to perform this action (https://experienceleague.adobe.com/en/docs/experience-cloud-kcs/kbarticles/ka-24053#:~:text=On%20the%20Change%20Thumbnail%20page%2C%20you%20can%20either). The first one, to which I refer in this request, only allows you to choose the thumbnail after viewing it and stopping the video at the exact moment. In addition, if the video lasts for example 10 minutes and you want a thumbnail of the end, you have to spend 10 minutes just to be able to choose it (and of course to get the exact frame right).This experience is unfeasible to carry out in a continuous workflow and with m

Description - as mentioned in this thread, currently there seems to be no to_string function to case any other type into a string. "concat" seems to be a workaround, yet still I think this is a missing feature Why is this feature important to you - sometimes a schema field requires a string which will fail validation e.g., when a number is coming in. There seem to be a lot of other "to_xyz" type casting functions around, yet this may be one of the most essential ones. How would you like the feature to work - provide a new function "to_string" that converts any incoming type to its string representation Current Behaviour - no explicit function available. "concat" seems to work as a workaround

Description - Have an option for a soft exception to include code freezes, holiday weeks, and other annual periods where resource availability for project work is limited.Why is this feature important to you - It will help my organization track task dates and avoid having task dates when many are out of office or focusing on operational work. Task dates get pushed out and there is no current way to "warn" a PM that the new go live or deliverable is scheduled to deploy during a code freeze or holiday week.How would you like the feature to work - Dates can be entered as a "soft exception" in a schedule to be assigned to a group. For IT we would enter code freeze dates. If a task start or end date is assigned during that "soft exception" the PM will be notified or the date will be highlighted to let the PM know they may want to review that date. This will be a soft exception since not all projects are impacted by code freezes and holidays.Current Behaviour - There is currently no visibili