Product Communities

We have a Project Manager who does not see the "Queue Details" and similar functions in their Project's navigation pane. They are setup as a System Administrator, similar to another PM who can see the "Queue Details". Any ideas of how to troubleshoot?  I've looked at permissions and layout, and they look ok. I've attached a photo of the PM who's working which is what the other PM is missing.  Ideas? 

Hi Fusion Community, I have an iterator module that iterators through a project's hours (many hour entries, some of which have the same hour owner ID). My iterator's output shows a number of bundles. I need a way to store or generate a list of a deduplicated owner ID's when comparing all of the bundles from the iterator output. Here's a screenshot of the iterator's output.                Does anyone know how to do this?Thanks,Nick

Hi,    I am having trouble with redirecting visitors to an error page that is located within the dispatcher itself. The use case for this would be to send visitors to a very general error page when AEM is entirely down/maintenance is in progress. I have read elsewhere in other posts that the best way around this would be to place an html error page within the dispatcher.    The DispatcherPassError is set to 1 in the vhost. We also have localized error pages set up and working great. My issue is when I create the html file within the Dispatcher, and route the dispatcher to this file on 404, I get a Not Found with this message: "error was encountered while trying to use an ErrorDocument to handle the request."   It is very possible I am placing the html file in the wrong location as well. Could someone assist with best practices on what directory this error file should reside within the dispatcher, or send a link to some documentation on this specific tasks? &nbs

My org has had a few instances of URL paths and/or page names changing globally, so I rely a lot on hit-level segments to replace dimension tables. Something I've noticed is that entries, and therefore bounce rate, does not act as expected in this scenario. When I use a segment that is hit-based with simple (URL = xx or URL = xx2) to combine the pre- and post-change URLs, it gives entries = visits. Looking at the same URLs in a dimension table, the entries is equal to the number of entries on that URL. I understand the mechanics behind why this is happening, technically each occurrence of URL = xx did have an entry, but that's not the entry I'm looking for if I'm using a hit-based segment. This behavior feels off to me and I'm wondering if (aside from creating my own bounce rate metric that doesn't rely on entries) there's a solution or workaround.

Hi,I am working on a project level report and listed 163 projects ids as part of the report filter to get data from these projects. But it seems the report only recognized 100 ids from this filter I used text mode to achieve this.Is there a limit to the number of items (or in this case ids) we are allowed to list within a report filter?

By @amandadeasy  and @chrismdavis  Migrating Adobe Analytics and Target implementations to Edge Data Collection simultaneously is key to streamlining your setup and ensuring consistency across your Experience Cloud solutions. In previous blogs, we discussed the value of using the data object when implementing Edge Data Collection for Experience Cloud solutions, including Adobe Analytics. In this post, we’ll dive into using the data object to migrate mbox parameters for Adobe Target. For a complete step-by-step guide, check out this Web SDK migration tutorial for Target.  Recall that the data object allows you to implement Web SDK without using an XDM schema. For Target, this approach also provides a flexible way to configure and pass mbox parameters without additional mapping, making implementation and validation even easier!  Creating the Data Object  Before you begin, ensure that your datastream is enabled for Target. If you haven’t already set

Happy Friday, Community!   It's been a while since I've asked a Friday question and today I have a few (will separate by post).    I never realized that my instance could use/had access to RCM and Success Path Analyzer (I checked it out thanks to the awesome Marketo & Mochas: 5 Marketo Features to Know in 2025 webinar), so I set up a revenue model this week and approved it for use with the analytics report.   Yesterday, I adjusted the reporting time frame in the Success Path Analyzer to "This Year" (I think it defaulted to All Time) and it's been "loading" ever since, whether I hit "refresh analyzer" from the setup tab or simply wait on the report page itself. With that in mind, I have two questions:   Is it normal for the analyzer to take so long to load? This is the first time using it so I thought it might take longer to run the first time, but this seems a little excessive given that I'm only running it for this year I have trigger campaigns

I may not be in the correct section, I'm looking at the Layout area trying to see if there is a way to make certain Fields Required to be completed before the Issue is converted to the Project. Is there such a way to do this in this area or any other area?

Hi,I have used EXISTS filters on various objects within Workfront reporting. I am wondering if it is possible to use an EXISTS filter on a journal entry report. I am trying to track changes on a specific field within projects where a specific task exists within projects. I am not sure if this is possible within a journal entry report. 

I have a Salesforce Custom object that holds data that I need to use in my segments. It doesn't appear that the "Has Object" filter is available for use in segments.  As a work around, I'm planning on setting up individual smart lists for the records that have each data value that I need, and then creating custom fields that will be updated based on who is in each of the smart list. Since there is also no "Was Changed" trigger for Salesforce Custom Objects, these will need to be run everynight instead of real-time.Once the data is in the custom field, then I can use that in the segments.  This seems like a really long walk to get to something that should be simple, so I just wanted to see if anyone had found a better way to do this. 

Hi,Recently we tried to deploy changes to dev pipeline but build fails for frontend module with below error:ERROR in /build_root/build/samsclubcloudservices-p16404/ui.frontend/node_modules/@types/gensync/index.d.ts06:30:05,974 [Exec Stream Pumper] [INFO] [tsl] ERROR in /build_root/build/samsclubcloudservices-p16404/ui.frontend/node_modules/@types/gensync/index.d.ts(45,34)error:11:29:56,079 [main] [INFO] Reactor Summary for samsclub-aem-assets 1.0-SNAPSHOT:11:29:56,079 [main] [INFO]11:29:56,079 [main] [INFO] samsclub-aem-assets ................................ SUCCESS [ 2.786 s]11:29:56,079 [main] [INFO] Sam's Club - Core .................................. SUCCESS [01:06 min]11:29:56,080 [main] [INFO] samsclub-aem-assets.ui.frontend - UI Frontend ...... FAILURE [ 47.599 s]11:29:56,080 [main] [INFO] Sam's Club - Repository Structure Package .......... SKIPPED11:29:56,080 [main] [INFO] Sam's Club - UI apps ............................... SKIPPED11:29:56,080 [main] [INFO] Sam's Club - UI c

I am creating a Header component for my site, and would like the authoring experience to mimic the AEM Sites "Tab" component. The content author would put down the primary header component, and then place inside of it's parsys a number of flyout components. Only one flyout is expanded by default in edit mode, and the content author has the ability to toggle which flyout is currently visible for editing purposes. In this case, my "Header" component is analogous to the "Tabs" component, and the "Flyout" component is analogous to the "Panel" component. I already have the markup and css worked out for the header. Now I'm porting it to AEM and making it authorable. Should I:Copy the out of the box Tabs component and rename all occurences of "tab" with "header"Create a new component called "Header" and set it's sling resource super type to the Tab componentSomething else?? I am basically looking for advice on the best and easiest way to achieve the editing experience of t

Is there a way to apply two conditions on a single column rules at the same time on the Report view?for example, I want to display 'text' on a report column when status is 'xyz' and XDate is blank. 

I have a Text With Formatting field that displays a link like this and I can't seem to get it to display in a report. Is this possible? I was able to access a typeahead field using {project}{DE:UserField:name}, but I was not able to access the entityMap where the url is stored using the same notation {project}.{DE:Merge Request:entityMap:0:url}

Hello everyone,  We want to implement a use case based on the cart of the user. The idea is to recommend items based on the user´s items in the cart. We can do it using the 'item-based' algorith type, "Items with similar attributes" Algorithm and "Current item" reccomendation Key like following:It worked fine. We were able to get proper recommendations around one item. We tryed this approach with several items using a custom token "profile.lastItemAddedToCart" where we save the IDs of the user's cart items like so: "id1,id2,id3..."  As you might understand it did not work, so, my question is: is there a way to make it work? We would like the algorith to be item-based with a item with similar attributes as we can manipulate the recomandation with the content similarity fields:Thank you in advance.

We have used emojis in the body of emails before, but today I am trying to add them and it is deleting them upon saving and sending. I am putting the code into the email like this: 🚗 and it shows in the preview, then when I send or save it disappears.   Also if I add it to the beginning of a string of text, Marketo deletes the block. Is this a bug?

We are using Asset Share.  Our search results component pulls assets from 2 different asset folders - we'll call them FolderA and FolderB.  Each of these folders has been assigned permissions via Closed User Groups.  The permissions are assigned like this: FolderA has 3 Closed User Groups - Group1, Group2, Group3. FolderB has 2 Closed User Groups - Group1, Group2. All of a sudden, we are getting an error upon login only for users who are assigned to Group3 (in other words they don't have permission to view assets in FolderB). On the front end we're seeing this: In the logs I am seeing the same query regardless of whether a user is assigned to Group3 or not.When it is a user assigned to Group3 who logs in, the logs show this and the site displays the error above (because the search is not returning results):Index-Traversed 10000 nodes with filter... Index-Traversed 20000 nodes with filter... Index-Traversed 10000 nodes with filter... Index-Travers

Hi, I am working in a system where the same email address can be associated with multiple profiles.  The profiles need to be distinct, however for the purposes of this email send I do not want the same email address to be contacted multiple times, even if each profile would qualify independently.  Previously in Adobe Campaign I would just dedupe my audience on email address. I am trying replicate this kind of behavior in a journey in AJO.  One thought was to use exit criteria for the journey and exit any profiles where the email address had received the contact, but that still means in the initial touch in the journey there could be duplicate email addresses. Has anyone dealt with a similar situation and if so how did you manage it?

Hi,I want to know if there is a way to track site speed in Adobe Analytics. I saw this question, but the Adobe plug-in: getPageLoadTime is no longer supoported, so I want to know if there's another way to track itThanks!

Hello, I am attempting to add a user to some Templates, but not in a way that assigns them to any work in the project. I remember there being an option on Templates to add users to the People's tab but I no longer see that option. Is what I am trying to achieve possible on the Template level? Thanks,Eric

Hi , I want to apply different styles on forms when I use the form in different pages.We have similar options available for components in pages using style system. Or is there any other way to do this. 

Hi Team, Recently I have faced a issue regarding cross domain tracking when user click on login which is added as button without anchor tag href.  I have implemented appendVisitorIDsTo method and it will works fine when you link is having href but when user click on button which will not have anchor tag and href in this case Implement a robust cross-domain tracking solution using Adobe Analytics (AppMeasurement.js) where tracking parameters are appended to button URLs through the backend system.This ensures consistent visitor identification across multiple domains. I have worked with back-end developer and added the AppMeasurement.js and VisitorAPI.js script on head section so that when user click on button it will appendVisitorID and set it on next redirection URL so that when user lands on page it will add the visitors id in landing page and visitor it will not get changed.With this solution visitor identity is maintained seamlessly across domains, improving attri