Marketo

Recently, my work team and I configured a flow to be able to eliminate people who will arrive with empty mail to Marketo, given that there is an integration to load the people we have in Salesforce. The flow is made with an intelligent "batch" list mode, which means that the people who are there until that day are loaded and the new people who arrive without email are not updated. That is to say, today 10/09 the flow runs but if someone new arrives tomorrow 10/10 it does not go through that flow. Is there any way to create this flow with triggers, taking into account that you want to immediately delete people who arrive without email?

Hi! In the mobile notifications of my emails (this only happens with iPhones apparently), the code of the header image is visible. Do you know if there is any way to avoid this? Thanks    

I am adding a Marketo Token into a link on a Landing Page which is not allowing me to save the page. I reached out to support and they are saying this is not possible. But we tested this and it worked fine before.   So my question is can you actually use a Marketo token in a URL on a landing page?

As part of our updates to Marketo Engage's Modern UX, we are updating the modals used in Reports assets to select assets in the Setup tab. These updates will be rolling out to all customers over the remainder of September and October 2023. Updates to the modals over the current modals include:   Improved filtering Improved navigation through the tree Side-by-side view of available and selected assets           Wait...didn't this already happen earlier in 2023? This is correct. At the start of 2023, we did an update to the design of our Report modals. Due to customer feedback, we rolled back those updates and worked to redesign the modal to address the pain points customers found. A post discussing this rollback can be found here: https://nation.marketo.com/t5/product-blogs/report-modal-rollback/ba-p/333298   So what has changed since then? We have worked to improve the design of the modals based on the feedback we received during the initial r

Salesforce is rolling out and enforcing Enhanced Domains to all orgs as part of their Winter ’24 release. Here is what you need to know in regard to Sales Insight, Sales Insight Actions, and Sales Connect.   Check out these articles:   Enhanced Domains Enhanced Domain Timelines   TLDR;   Enhanced Domains are being rolled out and enforced for all Salesforce orgs as part of the Salesforce Winter ’24 release (Sept 2023). For Sales Insight: The Sales Insight package does not have dependencies on the Salesforce url, and there is no change required on the Sales Insight side for the rollout of Enhanced Domains For Sales Insight Actions and Sales Connect only: Switching to an Enhanced Domain will impact the connection and users will need to reconnect (disconnect then connect) their Sales Insight Actions or Sales Connect account to Salesforce.  You can enable redirects to your previous domains so that users do not immediately need to reset their connection, howev

We have an issue when cloning a program that already ran with populated static list. When we clone a program which contains a populated static list, it clones the static list with those leads within the new program. Furthermore it creates an activity in the leads activity log. For example if a lead was added to a ‘Converted’ list in the source program, he/she will be also automatically be added to the ‘Converted’ list in the cloned program, even though this lead never went through out this new program nor the program is activated yet.Does anybody know if it is possible not to copy the leads inside the static lists when cloning programs? Or if there is an idea already created that will go in this sense?Thank you!Domitille

Hi Marketing Nation Community!   Missed the live webinar? No problem, we've got you covered. Find the recording, slides, and Q&A below for your on-demand learning.   Session highlights: The value of adding conversations to your marketing automation strategy to deliver cross-channel customer experiences. How to implement primary use cases such as sales meeting booking, website content engagement, and events/webinar promotion. Actionable recipes and tips to get a quick start on integrating Dynamic Chat into your Marketo Engage programs. Watch recording See slides   We've worked with the speaker Sara Barriuso and Dynamic Chat Product Managers @JohnDictson, @Sreekanth_Reddy and Adobe Professional Services Consultant @Jeanne_Penniman to answer the questions the audience submitted during the live webinar and we are posting on behalf of the group.   Check out the answers below. Comment below if you have additional feedback or questions to share. H

 We recently ran an Engagement program with 7 emails sent to 6000 people. Wed like to repeat our nurture campaign and send it to those that didn’t open the emails in the first wave of sends. Is this something that is possible? For example if 1000 people didn't open Email #1 they can be picked up again with another program. 

以下のメール配信を実現したいです。   ・商品Aのページにアクセス（商品Aを購入しなかった）⇒翌日、商品Aに関するメールを自動送信・商品Bのページにアクセス（商品Bを購入しなかった）⇒翌日、商品Bに関するメールを自動送信 ・商品Cのページにアクセス（商品Cを購入しなかった）⇒翌日、商品Cに関するメールを自動送信 …   この仕組みを、1つのスマートキャンペーンとメールアセットで実現することは可能でしょうか？ それとも、商品ごとにスマートキャンペーンとメールアセットを用意する必要があるでしょうか？

If I recall there is a "min. numbers of time" in the filter of "Clicked Link in Email", today I found it has gone. How can I get this function back or any suggestion that I can get the list of people who have min. clicked my email for at least 5 times last month?Here I can find "Min. Numbers of Times" was available: https://nation.marketo.com/t5/product-discussions/clicked-link-filter-number-of-times/td-p/76494   and how it looks like right now:

Hi guys,    Recently, Marketo is not pushing leads into the campaigns on SF. Looks like all the programs we have built in Marketo are doing that. Is there a solution for this? What steps do I need to take? Thank you. 

We want to fetch emailid and formid of the emails and forms that belong to a particular smart campaign using the smartcampaignid. Is there a way to do this using the API? I looked through the documentation and could not find anything that works. Something like this Asset - Marketo Developers endpoint but with a filter parameter for smartcampaignid.   Thanks!

Customers are the lifeblood of every company, yet many businesses don’t know if their customers love them or hate them. We’re about to show you how you can, in less than an hour, create a best-in-class Net Promoter Score program in Marketo that will find your champions and detractors alike.The Net Promoter Score (NPS) is an amazing way to determine customer loyalty. Bain & Company made this simple 1 question survey famous. You can read more about it here, but essentially it shows you your customers who are promoters (you want a lot of these) passives, and detractors (you want as few of these as possible).Here’s how to create a Net Promoter Score program in Marketo…Setup your ProgramWe created a new channel for NPS score, so that we can use program statuses to view the overall opinions of our customers. We defined program success to be 9’s and 10’s since those are what are considered to be ‘promoters’.Create new fields to capture NPS Score & NPS CommentsVERY Important Note: Your

I need to create a smart list to look for records originating from CRM. I'm having a little difficulty putting this together. Kindly help. Thanks.

In the world of Marketo, programs stand out as one of the cornerstones of success. Whether you're in the midst of organizing folders, fine-tuning naming conventions, conducting member searches, tracking program statuses, or simply keen on mastering best practices, this event is the right fit for you.   Adobe Business Advisors, @cynthiach3 and @kate_colbert will gear up to unveil the latest enhancements to Program Library templates and creative assets, all while delving into program management best practices through insightful demonstrations.   Our dynamic duo will kickstart the session by showcasing how to seamlessly import a program, shedding light on the recently revamped program templates, which have received a long-overdue update. To top it all off, Cynthia and Kate will wrap up the event with an engaging live Q&A session.   Join us for our upcoming Marketo & Mocha's session on Thursday, October 12th from 10am - 11am PT!   Register Here  

Question on enabling MSI for SFDC profiles, as the documentation has us confused.   We've successfully installed MSI with Admin Profile permissions only. How do we update other profiles to have access to MSI?  The documentation includes:  For profiles that are allowed access Sales Insight: In Tab Settings, change the Marketo tabs to Default On In Custom Object Permissions, check Read, Create, Edit, and Delete on Marketo Sales Insight Config (if the user should have access to the config settings - typically used for Admins) Does that first step: changing Marketo tabs to "Default On" allow access to MSI for the profile or are we missing something?  

Webhooks are a great way for Marketo to interact with external systems and interfaces.  Common use cases include leveraging 3rd party interfaces for de duplication, to enrich lead data, and to send SMS messages. Here's an example of doing the latter leveraging Twilio, a Launchpoint partner of Marketo. The documentation for sending SMS messages for Twilio is also available.Side note: Launchpoint is a thriving ecosystem of corporate partners that are actively developing solutions that complement the Marketo Platform. It's worth a look!First...sign up for a Twilio account, taking note of your authentication token, you'll need that for sending your SMS.Next up, create your webhook. Head over to Admin --> Integration --> Webhooks and click "new"Webhook Name: Twilio WebhookDescription: Send an SMSURL: %AccountSID%:%AuthToken%@api.twilio.com/2010-04-01/Accounts/%%AuthToken%@api.twilio.com/2010-04-01/Accounts/%AccountSID%/Messages.json (note you'll have to replace "Account SID" and

Hello all!  I have launched an A/B test of the subject line. Where can I view the statistics for each of the emails? In the dashboard, I can see the number of opens and deliveries for each version, but not the percentages. I know I could calculate it manually based on the info in the dashboard... however, I was hoping to be able to see it in a report. Also,  can I find out which individuals received each of the versions? Thanks! 🙂 

Hello,I'm having trouble embedding the same form twice on a page. I'd like to have a lightbox open on a button click near the top of the page and the form embedded on the bottom.I am close to making it work but the bottom form appears twice. Any ideas? Thanks!

I want to determine if Marketo Custom Objects support this use case:   We sell software subscriptions. An account (company) can have many subscriptions. Subscriptions can have many users (people). Users can be on many subscriptions. In Salesforce, some Subscription Users are on the account as contacts, and other Subscription Users are unconverted leads (not ideal, I know, but not on the table to change at this point).   I'd like to use Marketo Custom Objects to create relationships among people who are members of a subscription and the subscription. I want the subscription to connect at the company level so that only one object needs to be created and updated. If the subscription was connected at the person level, we'd need to create and update the subscription object multiple times over for each person, and I don't want to do that.   Here's what I am thinking: 1. Standard Marketo Person (lead) Object links to a Custom Marketo Object: Membership 2. Standard Marketo Compa

Hello, I would like to create an email template with a footer that will automatically update according to the country in which the email is received. I've already created my segmentation based on an SFDC field. Do you have any recommendations?

I think I know the answer to this but wanted to ask in case I've missed anything. Is it possible to run a report within Marketo that will produce all email activity that happened on a specific date? I am aware that you can specify a report for all activity related to sends on a specific date, but I am instead looking for user activity (with email) on a date rather than specifying the send date. Is this possible? I am aware that you can get this information via the API but we are trying to align/cross-check our API extracts which is why I am looking for a way to do this in the front end.