Product Communities

Hi Everyone, Few of the audiences are removed from the platform but still visible in destination connection. Is there a way to get audience IDs for such audiences? Thanks,Meenal

How can I use the Inlet ID for debugging purposes for streaming/edge ingestion done via postman APIs?

Is there a way to capture a scenario's run id in a notification updated?  Trying to figure out a way to identify the exact run in a fusion scenario that errored out.

I am looking to develop a detailed table that focuses exclusively on those web pages that have received more than 1,000 visits within the last six months. Is there a way for me to create a specific filter or segment to isolate and display this data effectively?

We are trying to set up a watch event using the Azure DevOps module. This is intended to notify us when a comment is entered on an Azure DevOps Product Backlog Item, Task, or Feature, and then sync that comment to the related task Comments(Updates or Note) in Workfront. However, we are facing an issue in our Fusion scenario, which is configured to watch for “New and Updated Records” (Work Item Commented). It creates two event subscriptions—one for new records and one for updated records—pointing to the same webhook address. This can lead to duplicate triggers if a single action in Workfront is interpreted as both a new record and an update, or if an update is registered immediately after creation. How can we address this issue?

Hey there! Does anyone know any text mode to get links to documents inside of a project level report?  Even better, if you can put logic in to look at folders based on name?  Thanks! 

Does anyone know if there is a way to Mask the From name on a proof notifications? All of the proofs come from a generic email address but it appears as I am sending it - what if we wanted it to say something generic like "<Company Name> Proof" Can this be done and if so how?

Hi All, We are currently working on a B2B use case where some individuals may have both customer and partner account types. In certain cases, these profiles may share the same email address, Marketo person ID, or account ID. However, our requirement is to keep these profiles separate and avoid stitching them together, even when the identities (email or Marketo person ID) overlap.Given that we are using email ID and Marketo person ID as our primary identifiers,secondary identifiers could you please advise on the best approach or configuration to ensure that customer and partner profiles remain distinct in our system?Thank you for your guidance.FieldDuplicate 1 (Customer)Duplicate 2 (Partner)ECID12341234EmailCDP_DedupeTest4@wd-test.comCDP_DedupeTest4@wd-test.comFirst NameBobBobLast NameSmithSmithCompanyXYZXYZAccount TypeCustomerPartnerAccount Id9999911111SFDC Id123XYZ321ABCPerson Id12121213434343Marketo FiltersCustomers OnlyPartners OnlySample record

Hi everyone,I have a lot of workflows in Adobe Campaign where I need to update and replace a specific attribute with another attribute.I was wondering if it's possible to use JavaScript to directly update the XML and perform a replace operation. For example, I want to locate [agreementLink/XYZ/@123] in the xml-code and replace it with [agreementLink/ABC/@456] in every row I can find it.I believe it should be technically possible, has anyone successfully done something similar? Any advice or examples would be greatly appreciated!Thanks in advance!

Hi all, I have a weird issue which recently brought down our website's XFs in AEM on Production.We have a bunch of 15+ XF handling headers, footers, carts and other experiences.Most of them have been live for months if not years and were working fine. However, on 3rd November the XF URLs started giving out 404. On checking the publish logs we are able to see the following - 03/Nov/2025:15:57:45 +0000 [133066] <- 200 text/html 12ms [cm-pID-eID-wa1-aem-publish-5ghzabc579-wgkjk]03/Nov/2025:15:57:45 +0000 [133066] -> GET /content/experience-fragments/website/en/site/experience-fragment-header/master/_jcr_content/root/freehtml.default.html HTTP/1.1 [cm-pID-eID-wa1-aem-publish-5ghzabc579-wgkjk] 03/Nov/2025:17:17:59 +0000 [204183] <- 404 text/html 14ms [cm-pID-eID-wa1-aem-publish-5ghzabc579-wxnc7]03/Nov/2025:17:17:59 +0000 [204183] -> GET /content/experience-fragments/canadiantire/en/site/experience-fragment-header/master/_jcr_content/root/freehtml.default

Hello everybody!I'm discovering AJO and got stuck in understanding on how to create a Profile. Can somebody explain for me please!

Is it a way to use event Type in Target audience building from Web SDK? Updating Media 

Hi,I'm looking for a way to successfully update the contact date for already scheduled delivery. The delivery is scheduled via Scheduling > Schedule delivery (automatic execution when the scheduled date is reached), the workflow with it is executed and the delivery is prepared and has status "Start pending".What I tried is to update the contact date from js:var deliveryId = 123; var updatedTime = "2025-10-27T09:00:00.000Z"; var del = nms.delivery.load(deliveryId); del.scheduling.contactDate = new Date(updatedTime); del.save();The script successfully updates the contact date, but the delivery is sent at original time not updated one. I think that there is some interim schema which also needs to be updated.Any clues how it can be done? The setup should work in v8.

Hi, I have a question regarding token/API key when configuring a new API Credentials for an SMS custom provider. Here the cURL for sending an SMS (no neccesary to create a token for sending) And then I have this cURL for token: When I go to create the API credential, I have the API KEY option, what should I paste here, in Name = "Bearer" and in API token, the api_key? (based on first image cURL)or should I generate a new token with the jwt option (2nd image cURL) and then adding the authentication parameter in the header?Here the custom payload I need to paste: {"message": "This is test and \n this is a new line","to": "+111111","bypass_optout": True,"sender_id": "SMSto","callback_url": "https://example.com/callback/handler"}I've tried everything and I have failed authentication when trying to send Verification SMS  I'm completly lost about this SMS configuration. Your help will be very valuable. Thanks!   

Wjen i was trying to create n8n workflow for the task it always fails as forbidden credentials or 403

I want to know how we can achieve the below requirement for the personalization from recommendation.We have to personalize the products through the recommendation in the carousel where the male products are visible to male visitors, female products are visible to female visitors and also on the basis for the geo location like if the person is from bangalore than the person should have the most viewed product from Bangalore city only i.e. recommending the products as per the user location.If the above is possible than how we can do these things. I have checked it might be possible with the profile attribute matching or profile matching filter but I am not getting the proper steps for this.

Hi,I have a test program created in the year 2018.Today Imported program members via bulk API with program member status as "Member"  and set program member values.API returns status "Queued" and import completed without errorsI do not see any program member when I clicked on program "Members" tab in Marketo UI.ironically, I saw all emails when I exported program members data.Program type is default, channel is emailI can see program members in Marketo UI if I import emails via .csv file manually.Can you please help me to understand what's going wrong Thanks,Babu

Hi everyone,I'm integrating external database lists into Marketo, and part of the business requirement is to create new static lists in Marketo automatically from that external source.The database API requires passing a folder ID or program ID where the lists should be created. However, in the Database section of Marketo, there are only folders and lists, no programs. Also, folders in the Database don’t display any ID in the UI.How can I find the correct folder ID to use in the API request, so the integration knows where to create these new lists within the desired folder in the Database section?Thanks in advance for your help!

Hi,We have 2 websites on separate domains, that we want track with a single Marketo instance. Site 1Munchkin tracking codeMarketo forms Site 2Munchkin tracking codeSalesforce commerce forms Our plan is to submit the munchkin tracking ID along with the Salesforce form, which will then be used in a Push Lead API call  to associate the visitor activity with the lead after it is synced to Marketo. However, if a lead first fills out a standard Marketo form on Site 1, and then fills out the form on Site 2 (triggering the process above), what will happen? Will the lead become associated with the munchkin ID of Site 2 only, and Site 1 activity will no longer be tracked? Or does Marketo maintain the association of multiple tracking IDs? Thanks,

 I’m trying to build an account-level engagement analysis in Adobe Analytics for a B2B services company.I already have an uploaded list of accounts (with company name, industry, region, etc.) available as a dimension in my data. I want to identify which accounts show high engagement — for example, accounts that generated more than a certain number of visits, unique visitors, or page interactions in the last 3 months.The challenge is that in the Segment Builder, the logic options are limited to Visitor, Visit, and Hit containers. I can’t figure out how to create a segment that groups all visitors under an account and then filters based on that account’s aggregated engagement metrics (e.g., “accounts with visits > 5”).Has anyone successfully created account-level engagement segments in Adobe Analytics?Specifically, I’d like to know:How do you define and apply thresholds like “high”, “medium”, or “low” engagement per account?Can this be done directly in the Segment Builder using t

Hi! I'm trying to create a filter (I believe it might need to be a text filter). I'm working on reporting and dashboards and trying to build a dashboard for a specific subsector of projects within a portfolio. Right now I have a report filtered by program name (ID) where I typed in the word "talent" and just selected all of the programs with the word talent in the name. However, this doesn't automatically update because every time a new program with the word "talent" get's entered, I would have to go back in and add it it the filter. I'm assuming the best way to go about this is to add a text filter that filters every program with the word "talent". Could anyone help with what this text mode filter would look like? Let me know if there's a better way to do this.

I am trying to create a landing page, subdomain, and preset are correctly configured. But when I create a landing page and publish it, I get a 400 error when I try to access the landing page

Could using the same subdomain for both SMS and email impact my email sending reputation?For example, if my SMS channel generates a lot of spam complaints or opt-outs, could that negatively affect the reputation of the email subdomain in any way?

We have a client that is asking for our project data to be exported to MS Project and provided to them. I know we can export each individual project but I am not seeing any way to do a bulk export to xml. We have 450+ projects that need to be exported multiple times. Does anyone know the best way to do this? Maybe it can be done with a Fusion scenario?

Hi All , Is there any way to find list or details of all workflow which have update activity used anywhere across all workflow on instance. Thanks