Solved

Hi All, If I have a page where I want to track1. button panels2. radio button I basically track both every time a customer interact with it. So in a single page load, user can click button 1 and button 2 before going to the next page. Then 2 network call will appear using the same eVar with different name. e.g.eVar2 = "button panels 1 pressed"eVar2 = "radio button 1 pressed" How am I able to get a reporting where I can see how many people selected button panel 1 AND radio button 1 ?

Hi all, From the warning below we understand we need to create our own contexthub configurations.My question is how to best do it?By copying nodes from under /libs/settings/cloudsettings/legacy/contexthub to /conf/[myproject]/settings/cloudsettings/[myfolder]/contexthub? 

I have a form set up with a hidden field to capture the utm_campaign on the referral link and write it to the Person Source. If its not present, it defaults to Gated Content. Here's how I have it set up:    I'm trying to test it with some ads we're running. The ads point to this URL: https://www.plasticsurgery.org/cosmetic-procedures/liposuction?utm_source=Dynadmic&utm_medium=Video-Advertising&utm_campaign=Dynadmic-Liposuction-Q4-2021 On that page, there's a CTA that leads to a Marketo landing page at https://pages.plasticsurgery.org/LiposuctionHandbook.html  I've been trying to test it by pasting the link above into an Incognito browser, clicking on the CTA, then creating a fake account. But when I check the program member record of the fake account, it shows the Person Source set to the default, Gated Content.  I had this set up and let it run for a few days, and I did catch the UTM parameter of a completely different campaign in the l

I’ve read over 100 posts in the community on this topic. The most helpful were Marketo Success Series: Engagement Programs and Engagement Programs Part 3: Technical Deep Dive. I'm setting up the Nurture with Nested programs for the first time and would really appreciate community's help on the topic.Here's what's given: Engagement Program 1 (EP1 for future reference) contains 7 nested default email programs with emails and smart campaigns (let’s call them NP1, NP 2 etc for future reference). Each of the Nested programs contains email asset and the following smart campaigns (you can see them on the image too):       1. Send email Track opens Track Clicks Track replies (we have Drift Email) Track unsubscribe Exclude people from sending specific content if it was already downloaded before.  The questions I have:1. Do the smart campaigns within nested program have to be trigger campaigns? Meaning on the Smart list page do I use trigger filter “opens ema

I am looking at implementing a POC for custom workflow process where the content item along with all assets referenced in the content item are approved and replicated at the same time. That is if there is a content fragment which references image files in DAM that those would be replicated along with the content article. Thanks for any code references links to related documentation.

I created a report that listed all the active projects a user is assigned to in Workfront. I want to filter out the projects where the users has completed their tasks. I only want to see the project a user is assigned to with incomplete tasks. I'm attaching a screen capture of the report filters that I currently have. I can't figure out how to get task status as a filter. Thank you for any help you can provide me! John WeissWorkfront AdmininstratorFollett Products, LLC

Hi Team,   Is it possible to display the profile attribute values in AT Activity dynamically?  Use case :1. Activities will come from AEM 2. Profles data will come from 3rd Party to AT Use case to display profile attrubute value in activity dynamically. Any ideas/advice would be great to solve the problem.   

Hi Everyone, Does anyone knows a way to send the personalized email going to target recipients stored in the database, to the seed addresses as well?It just has to be first name and last name, but seeds should get their names and not someone who is on the database. Any help is appreciated.Thanks,

I am working on a migration from 6.4 to 6.5. We have a basepage component which has a select dropdown for the field pageType. Please see the below screenshot.The datasource node is responsible to populate the dropdown. The datasource node points to an html page which calls the Model class(As seen in above screenshot). Model class is populating the data based on language configuration. Issue :In AEM 6.4 local the dropdown is getting populated without any issue. But when I check the same in my AEM 6.5 local the dropdown is not getting populated. (Note : This is happening before as well as after doing the Coral 3 migration.) Can someone please help me understand what might be the possible cause?

I am trying to remove a few leads from a smart list I created that shows me people who have submitted a form. I select the leads, click on Person Actions > Marketing > Remove from List. A dialog box opens asking me which list to remove from, and the smart list I'm currently in is not available to select. I tried from another list to see if the list I was in would be available that way, and it was not. I don't want to delete the records, just remove from that particular list.Any help would be greatly appreciated. Thanks.

Hi,Our client wants to record visit ID in an eVar and we were looking for some kind of solution. Is there any way to do this with dynamic variables? And if not, maybe the concatenation of Visitor ID + Visit Number would work (also through dynamic variables)?We would really appreciate some help on that.Thanks!

Hey there, how do I block/abort processing of the request using  sling filter. Thanks

Marketo says “The engagement score makes it easy to see how effective the content in your engagement program is. The score ranges from 0 to 100. ”   https://docs.marketo.com/display/public/DOCS/Understanding+the+Engagement+Score#:~:text=The%20engagement%20score%20makes%20it,ranges%20from%200%20to%20100.&text=To%20give%20people%20a%20chance,72%20hours%20after%20each%20cast.   But on this lead, Engagement is 150     How is that possible?    thanks in advance, Mark  

Hello,I've got an requirement to change the page title from Authors user interface. The default title in AEM 6.4 is "AEM Start", in AEM 5.6 is "AEM Projects".Is it possible to archive it, if so how? Thanks in advanced. 

I'm working on a task report and wanting to show in a chart the tasks that were "late" and "on time". My groupings are 1) Project >> Name and 2) Task >> Project Status. Left (Y) axis on the chart is 'Record Count" and bottom (X) axis is "Project Name". The chart results for all the projects are 36 for all the projects, there's nothing for "On Time" or "Late". There are completed tasks in the projects that are past the due date. The other issue is that the Days late are all "0" even when the task completed weeks after the due date. What am I doing wrong? :(

Hi, I am facing an issue with sites console in AEM on showing data for the pages from Adobe Analytics integration. The data for Page Views and Unique Visitors are not coming out.   I've followed all the steps from the documentation guide for integrating Adobe Analytics and AEM here. but I had no success.It should appear like the following picture Please let me know if there is anything else that I need to do to get that working properly or if someone have already struggled with this kind of integration. Thank you.  

I just watched a recording  of  the Summit sessionhttps://business.adobe.com/summit/2021/sessions/pdfs-no-longer-an-analytics-blackbox-s603.html Because it was a recording, I could not pose questions, so am asking here - how would we embed tracking consent into a PDF  when using  the  techniques covered in  the  presentation? Thanks for info/ideas.

I have followed below doc for connecting my localhost to adobe target through adobe io console as explained in below document . https://experienceleague.adobe.com/docs/experience-manager-65/administering/integration/integration-ims-adobe-io.html?lang=en#prerequisites * Created IMS configuration by downloading public key and loading the same on adobe I/O to get payload and client Id and all* After that I tried to do health check , that is when I got below error PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target 

Hi All,I am looking for some direction on how to integrate Launch with React.js application (SPA).Thanks! 

Hi, We are using web analytics account to add UTM tags. In Email delivery we are using newsletter defined in the publication template. In template there are multiple buttons and URL are configured. Our requirement is too add utm tags with custom attribute. I have added below code in the Web analytics external Account. When I click the link or button present  in the email I can see the UTM tags in the URL.  <%@ include option='NmsTracking_ClickFormula' %><% // Parameters expected by Adobe Analytics Data Connectorvar pattern = new RegExp("(www)", 'i')var mtype= message.delivery.messageType;if( $(urlstring).match(pattern) && delivery.FCP == false && mtype==0) {%>&utm_source=abc&utm_medium=email&utm_campaign=<%= message.delivery.customAttribute %><% } else{%>&utm_source=abc&utm_medium=sms&utm_campaign=<%= message.delivery.customAttribute %><% }%> The new requirement is, if the customer clic

Hi Team, I have created service user and i have added i have given permission to service userNow question is how to get the session using  service user.can any one give coding example so that i can understand 

Hi all, In Adobe campaign classic I have WF using Alert acivity and purpose to send email to some user but I need to see where can I setup / configure (Sender's name : for example : Company Name<no-reply@companydomain.com) )Can anyone let me know. thanks in advnace. RegardsCSLTGupta

I'm trying to download a file via Get Request using Web Download Activity. However, The request contains, multiple headers necessary for authentication of the request. But I'm unable find a way to add headers. In delivery activity we can add variables via script tab.  Do we have anything like this for Web Download activity as well? Please do let me know. 

Hello,We have configured some data warehouse reports. Some of them failed and we corrected them later. But we still get Failure reports like below for the old requests that were not successful . Is this possible to cancel these requests??  The emails were supposed to have an unsubscribe link too. But i dont see the unsubscribe option anywhere in the email.  This is bothering a lot of users as an email distribution list(DL) was used while setting the the report initially. Although the email address has been changed, the failure reports of past emails are still going to the same DL    

I am interested to see how people are doing release builds for an AEM project:using the maven release plugin that is in pom.xml OOTB for this archtypecustom process using other maven plugins (build-helper plugin, version plugin)Pros/cons for each option? what is the release numbering mechanism that you use? how is the patching done? do you use a release branching mechanism?Thanks