Solved

Hello,Can someone please explain the difference between Time Spent per Visit and Average Time Spent on SIte? I reviewed the Time Spent page on the Analytics Components Guide but felt the definitions were similar and couldn't quite understand the differences. I know one is typically higher than the other. Time spent per visit (Seconds)Total seconds spent / (visit-bounces)Represents the average amount of time visitors interact with a specific dimension item during each visit.Average time spent on site (Seconds)Represents the total amount of time visitors interact with a specific dimension item, per sequence with a dimension item. It is not just limited to “site” averages as the name suggests. See How Time Spent is Calculated section for more information on sequences.Note: This metric will very likely differ from Time Spent per Visit at a dimension item level due to the differences in the denominator in the calculation.

After authoring Brightcove video player component, brightcove thumbnail taking more time to load the page. How to fix this performance issue?

Hello,   I am trying to set up an A/B split test for the subject line for one of our emails. The Champion/Challenger setup is confusing me a bit. I do not want to send a portion before the actual email send to test, and then send the winner subject line to everyone else. I would like to send this test to 100% and split it evenly 50/50 with the subject lines on the day of the actual send. My question is, if I move it to say 100% receives Challengers like in this screenshot: Will it send it to 100% divided evenly? It is trying to force me to select champion sections even with setting it to challengers at 100% so that is why I'm not sure if it will actually do this. This is what it shows on the next screen:   Thanks, Ashley

I have a component with various fields in it along with image field. I want to refresh the page only when the image field is update. Right now I'm using edit:config to refresh page "afteredit". How can I refresh the page only when the image field is edited? 

We ran a AB Test program with two different subject line, and we have an Interesting Moment campaign to capture open activity with subject line. we use token to capture the subject line.   We are unable to see subject line for this AB test program in activity line, it appears 'Opened Email: Subject Line: "" '   Do you have any idea why this occur and any solution for this?

Hi,   we did setup a new CNAME for a new brand. The CNAME looks like: info.[brand].com.  IN CNAME [marketo-instance].mktoweb.com. [marketo-instance].mktoweb.com. 300 IN CNAME sj11.mktossl.com.sj11.mktossl.com. 300 IN A 104.17.72.206sj11.mktossl.com. 300 IN A 104.17.71.206sj11.mktossl.com. 300 IN A 104.17.73.206sj11.mktossl.com. 300 IN A 104.17.70.206sj11.mktossl.com. 300 IN A 104.17.74.206   In addition to that, we added the new domain as a domain alias to the Landing page rules. But when we try to access the landing pages, we get a 403 result instead of the actual landing page. Does anyone has an idea what the issue could be here?

I need to create an automated email that goes out once a week. It sounds straight forward but I am stumped on the best way to execute this.   This email would go out to all members informing them of new activities created the previous week.   The email would contain information on the activities and links to our website going directly to the activity.   The activities are created by another team member and the information is stored in our backend.   I envision the program to work like this: The other team member inputs the new activity information in our backend. On the day before deployment, an API trigger populates a table with the new offers and their information. On the day of deployment, a smart campaign checks to see if there is new information in the table and if yes, sends the email inserting the offer information from the aforementioned table into the email, and if no, no email is deployed from this program for that week. What is the best way of executing

Hi,I am using Mac machine and hence installed forms package for Mac. We are trying to test forms with  OOTB template "Basic with Adobe Sign" with all default configurations, Form Model: None,Document of Record Template Configuration: Generate DOR. AEM Version : 6.5.7, AEM Forms Package: adobe-aemfd-osx-pkg-6.0.234.zip - When i try to go to step2 : verify step, it gives below error:Internal Server ErrorCannot serve request to /content/xfaforms/profiles/default.html in /libs/xfaforms/render/GET.jspException:com.adobe.forms.service.LCFormsServiceException at com.adobe.forms.service.impl.LCFormsOsgiServiceImpl.render(LCFormsOsgiServiceImpl.scala:92) at com.adobe.forms.service.impl.LCFormsServiceImpl.render(LCFormsServiceImpl.java:126) at org.apache.jsp.libs.xfaforms.render.GET_jsp._jspService(GET_jsp.java:115) Not sure, if am missing some thing, but wanted help on checking whats the issue and debugging and fixing the issue.  

Hello all, looking for some insight on this one. I can't find how to set up schedules for email notifications if one exists. If you know of anything I am missing please share. Thank you in advance. =D

Hi Marketo Community,    I need your help. I'm trying to copy our Customer Success Team on all of the newsletters that are sent to our clients.    I read through other posts and found the following options that don't quite fit for us: bcc, cc, and alerts. With CC, we only have the option to add an Account Owner or Lead Owner and neither works for us because the account is usually owned by an AE in the CRM. With BCC, I understand that they'll end up receiving a copy of every single email (if 500 clients then 500 emails) so that's out. And finally, with Alerts, we have an issue with the flow function - only sales or account owner can be selected.    Also, we've tried just using "Email Address" filter but all of our internal folks are automatically excluded as part of the "Email Eligibility Segment" that excludes unsubscribed, marketing suspended, invalid email, etc.   Does anyone know of any other options? 

HI i've undertaken all of Adobe Analytics training over the years, but now we have upgraded to Adobe Ultimate, i'm being asked to implement this, but i can't see any training/best practice/guidance to do this.  Will it be absorbed as part of the training i've done in the past or is there anything new and specific?

Hello,We have a Mytoken added in the email content which pulls the Meeting details(Date and Time) of an appointment. We have faced scenarios where the sometimes Mytoken doesn't pull any value and sends out the email blank(with empty space of Mytoken value).   Is there any way we can stop the email when Mytoken used in that email doesn't have a value?   So If Mytoken has value ---> Need to send the email If empty value ---> No need to send the email to that record.Can anyone please help ASAP.

Hi All, Can anyone confirm if it is possible to use functions (the ones that can be used to manipulate data in expression editor in workflows) in ACS content blocks, with the purpose of manipulating the personalised data that is generated when email deliveries prepare.e.g. hash an email address without having to store the hashed version on the profile table. Something like: <%= Md5Digest(context.profile.email)%>That specifically doesn't work, but I'd love to hear if something similar is possible.Thanks David 

Hello all, I am having an issue on AEM 6.2 after applying the hotfix 12875, service pack 1, and featurepack 12445. I have made sure all bundles are installed and active in system/console. When I go into the authoring mode to edit any site, I am met with the welcoming screen, that explains switching between different authoring modes. When I click don't show again, and then hit refresh, the popup shows again. Furthermore, making any edit or change to any part of the site, including component configuration and properties, results in either a "forbidden" message or a "this request could not be completed because you have been signed out". AEM seems to be functioning perfectly everywhere else, packmgr, siteadmin, crxde, etc. I only get these errors when trying to author a site. No site works, even the geometrixx sites give this error and popup. Below are screenshots of the popup and the error messages.Has anyone else ran into this issue after installing the service packs? Am I possibly missi

Hello guys,I am stuck on how to achieve a certain result. The end goal is to add a property to a node when the dialog is submitted. The property should ideally be fetched through Java logic and then added to the dialog properties on the generated node. This should happen for a set of components that have a similar resourceType (i.e. they are all in the same folder) Essentially I am imagining something like the picture:1) the dialog contains the editable configurable component's properties2) on "cq-dialog-submit" if the resourceType startsWith the desired resourceType then3) pass the info and resource to the Java logic, which fetches the additional property and, once retrieved, adds it to the resource that is the component's node that is going to be generated4) ultimately the node is generate5) and the component's node contains all the dialog properties + the additional fetched one.Above everything else, I am confused on how to activate the Java logic by ensuring that the reso

hi Guys,I'm moving to Cloud Manager deployment soon ( 6.5, Adobe Managed Services).My old clientlibs are in /etc/clientlibs/myapp and my new ones are in /apps/myapp/clientlibs.As part of the deployment to Cloud Manager, am I supposed to remove the old onesmanually with the package manager ? (Or do they automatically get removed?)thanksFiona

Hello Everyone!Can someone help on this case?As we're trying to connect on Adobe Campaign but having this error Adobe Campaign Classic - Client Console Error - Error creating the cookie (Windows error code: 12005)

I'd like to restrict editing on the top page of our site, as well as a few key child pages, while at the same time allowing users to edit pages beneath these key pages.For example:example.com/homepage is our parent page that we want to restrict access to.example.com/homepage/topic1 is a child page that anyone can edit as necessary. Because of cascading permissions, if I deny access to /homepage, then I'm denying access to all child pages.I can, of course, deny access to /homepage, and then manually allow access to all the child pages, but this seems like a nightmare to maintain.  Do I have any options here? We recently had an issue where an author modified our landing page without checking in with the team that owns the landing page. I'm trying to figure out the best way to restrict access to the landing page, so other ideas are welcome.  Thanks!

  Hi, I save UTM parameters via hidden fields in Marketo. Should I make a distinction between global and local forms? I have read that with local forms it is better to track the UTM parameters better via the programs, can someone explain why?

Hello everyone,I am researching, if it is possible to customize the Adobe Campaign Classic Dashboard a.k.a the Home page.If possible we would like to change the background image and integrate a newsfeed.So far I could find the following post regarding he topic.https://experienceleaguecommunities.adobe.com/t5/adobe-campaign-classic-questions/how-to-customize-adobe-campaign-dashboard-and-welcome-screen/qaq-p/234003#Since the post is 4 years old and we are working with Adobe Campaign Classic 7.0, I would like to know if there were changes regarding the topic.I could not find the required information within the documentation or other forum posts.Thanks in advance. Regards, tlindemann

Hello, With the recent ITP update and impact on CNAME first party cookie (below is a reference info link), https://cunderwood.dev/2020/12/01/adobe-provides-direction-about-apples-recent-cname-changes/ Would like to see if Adobe have any roadmap to handle this? Meanwhile, as a workaround, would like to explore to add some code to the web server and generate the ECID (on server side) and then send the cookie with ECID as part of the web server HTTP header. My understanding is that ITP will not touch those cookie in this scenario. Would like to see if anyone have done something similar and can shed some lights here? Thanks,John  

Hi there, We have extended the sending logs resource to include segment code.We use this a lot on workflows in segmentation activities and subsequently use it in email deliveries for dynamic content and visibility conditions. Segment code is clearly getting stored against each sending log and is selectable when using a workflow query on that resource, or in dynamic reports.However, it is not available when configuring your view in the sending logs of a delivery.This would be really useful if it was possible, does anyone know if it can be added? Thanks David 

How to Fetch OSGI configurations value in JavaScript ?

HeiCreated Custom form title "Priority Setting of ECRs", but in the calculated field "Priority of Claim" tried to add condition on IF statement.This calculated field is based upon above calculated field "CC1", and added to a project while testing. But the calculated field "Priority of Claim" does not shows the condition based upon the value coming from calculated field "CC1".Please guide in this regard. Also refer the attachment.MvhKundan.

Good day. Please help me figure out the error. When saving any configuration, I get an error (like in the picture). In this case, the configuration is saved, but the error is still there. What could be the reason? Also, I got this error in the consoleThank you very much in advance! PS AEM 6.5.6 version