Solved

I'm trying to understand how Nielsen defines certain markets like Philadelphia, Wash DC, Baltimore, and Richmond.  Numbers in the DMA report for Visits, Page Views, and Unique Visitors are significantly bloated compared to the total traffic we get. For example, Visits for the above stated 4 markets in the DMA report for June is 546,469 while total Visits to the website was 817,947.  We think the 546,469 (almost 33% of total) is way too high.Does the fact that there are lot more ISPs in these markets, make our #s high?Appreciate your insights.Chris

Hi, I need to push an eVar through to Sitecatalyst AFTER the initialization, i.e after the tracking pixel has rendered. (i have a JS function that goes and gets an id from another service and I need to get this into sc)Is this possible and if so, how can I do this without registering another page view etc?Many thanks,Dave

Good morning everyone!I was curious to see if SiteCatalyst had a feature which I could be able to report the number of times our SiteCatalyst users view the dashboards I create with their usernames, and what dashboards broken down for me to see. It'd be nice to know if my dashboards are being useful internally. :) Thank you!

Hello, I would like to use the Fallout report to look at continue rates on our website, but I was trying to double check the numbers and am arriving at inconsistencies.  How exactly are the Fallout report's numbers arrived at?  For example, I'm trying to find the fall through rates for Page A and Page B, which have several pages in between them in the flow.  I tried recreating the Fallout report using the Visits report and segmenting on (Page A, THEN Page B), but while my total visits to Page A are equal for both Visits and Fallout, my numbers for visits that end up on Page B are double the amount on the Visits report than the Fallout report.Is there a reason behind this inconsistency?  What would be the correct way to create the Fallout report in the Visits report?Thanks,Mike

Hi,I'm trying to create a dashboard with the following:a customized reportlet showing a bubble chart instead of a bar graph,show the first 30 items sorted by a calculated metric,not show the calculated metric in the graph,be able to switch report suites in the dashboard while maintaining the reportlet settings. I know for a bubble chart Report & Analytics will use the first three metrics selected, 1st for X axis, 2nd for Y axis, and 3rd for Bubble Size. Once I have the chart the way I want to show it, I create the reportlet in one of my report suites and add it to the Dashboard. Here are the problems I'm facing when I switch report suites while viewing the Dashboard:- The default setting is to always sort by the first metric when changing report suites. So I placed my weighted metric first and chose to not graph it, however when I change suites while in a dashboard the chart will now show it.- If I move the weighted metric to the 4th column and sort by it, then whenever I switch re

I just joined my current company and we are looking to transfer some processing rules from our production report suite to our stagining report suite so that we can verify some tagging fixes were done properly.I am not certified in editing / creating processing rules quite yet and we are looking to make these changes soon so we can push the changes live. Can someone in ClientCare assist with these quick edits? I am in the process of obtaining the certificate but am looking for some interim assistance. Thanks,Callie

We have Total Monthly Unique Visitor count, we want to know:1) how many of these have logged in,2) how many did NOT log in, and lastly3) how many were cookied via the "Remember Me Next Time" check box in the login screen.Here is my login screen --> https://midatlantic.aaa.com/myaaa/login?returnUrl=/?zip=19802&stateprov=de&city=wilmington&devicecd=PCThanks in advance!Chris

In Report Builder I'm trying to run a report for the last 3 months, monthly granularity, of total File Downloads on the site. However, I can't figure out how to get a Total count for all files aggregated vs. a count of Top 10, specific files, etc.I'm sure there's an easy answer I'm overlooking, can someone help point it out?Thanks

In one of the report suites I've inherited, I see all the subdomains of one of my websites in the 'Servers' report: www.site.com - x page viewsforums.site.com  - y page viewsresearch.site.com - z page viewsHowever, in a different report suite for a different site, which also uses subdomains, I get no reporting, just the dreadedNo data match these criteria. Please verify the segment, metrics, date range and filters. I've looked for info in the documentation about subdomains but haven't found out how this data gets collected or what might be the cause of the differences in the two reports. Would appreciate any suggestions about how to proceed. Thanks

Every time i try to update the reports through my user and computer are the only parties to request processing and retrieving data. [img]reportbuilder.jpg[/img]

We are getting a lot of values of "none" in our visitor domains, around 23%. My understanding is that when the ISP does not provide the domain information Adobe Analytics will use the "none" value. We currently use a segment that excludes internal visitors by domain so if there are a large number of domains that are not identified we don't know whether they are from our servers or legitimate viisitors. Consequently we cannot exclude them using domain segments. Is there a way to reduce the frequency of "none" in our visitor domain fields?One solution is to use the IP Exclusion feature to remove internal visitors however it is not always easy to find out which corporate IP addresses are being used since we have servers around the world and of course we would have to interact with our IT department. This solution will eliminate the internal visitors however our Marketing team would  like to know how many internal visitors also use the web pages so we would have to come up with another app

Does anyone know if there is a way to pass multiple pageViews or events (=link tracking) with one request URL?I've tried using two AQB parameters but apparently that's not the correct way.http://xxx/b/ss/xxx/1/H.26.2/s58454947473466?AQB=1&xxx&AQB=2&xxx

How many maximum no of reports i can schedule in Report Builder 5. Is the number same for Admin users also? Is there any work around to increase the limit? Help is highly Appreciated.Thanks.

I noticed it's possible to look at country breakdown multiple ways and was curious of the difference? Specifically using the Geosegmentation Report versus the Site Section Country Report. Thanks in advance!

I've got the following code to assign the path value to a data element:if(location.pathname){  return location.pathname;}else  return '';Is this correct if I want to have the URL path as the pagename value in the Pages report?   The reason I ask is I am seeing full URLs as Page values in the reporting.Thanks!

I have been receiving the following error while trying to refresh existing report in Excel using Report Builder."A System Level Error Has Occurred"Has anyone else had this issue or know what is causing the refresh to fail with this error?

Hi,I am encountering an issue where omniture is not capturing all the click from website (it is sharepoint 2013) web site. We are simply using file referencing and pasting code on in master page. Though on each page omniture script is being called.Any help in this regards highly apperciated.Thanks, F

I manage over 150 web pages daily, and I am trying to use Tableau to better visually show how our sites are performing to clients for better analysis. Is there a way to get metrics broken down by individual instances like so:Page view    Country            Device    Time of day     Source        Time on Site1                United States    Ipad        10:00 a.m.      FaceBook    35 secs I have attached an example file of the desired breakdown. I do not need all of those breakdowns, it is just set up the way I want. Thanks!

In Data Warehouse, I see that there is a Visitor ID dimension that assigns a unique value for each visitor to the site. Is there any way to get the Visitor ID dimension in SiteCatalyst or Ad Hoc Analysis? Thanks in advance!

Hello,Let's say part of my website is tagged with RSID # 1 and other parts are only tagged with RSID # 2. Would any part of the visitor cookie persist as people navigated through pages or would they be two different Visitors? Would the referrer of RSID#1 be lost so that the traffic would look to be direct in RSID # 2?

Hi,Is it possible to exclude IP addresses across multiple suites at the same time? As we have over 50 reporting suites, updating one by one can be extremely tedious. Currently the location to exclude IP seems to be located under Admin > Exclude by IP. Which in turn seems to only apply changes on individual suite level (example: I have updated one suite but changes does not seem to affect other suites).Any suggestions?Many thanks

Hi Guys,Can the Omniture Reporting API (REST) called using Jquery AJAX ?TIAMathu

link www.xyz.com/cid?abc123 is not being tracked whereas the root version xyz.com/cid?abc123 is the only one being tracked.How can this problem be solved through configuration on Site Catalyst end. I think the easy way is to reconfigure the www version to redirect but some data has been passed through already and I'd like to recoup that information if anyone has any ideas. Thanks in advance! 

The product Im building requires our clients (Adobe Omniture users) to grant us access to their traffic data. I understand OAuth 3 legged Flow is there precisely for this purpose. I however am not a paying Adobe Omniture user myself and the Docs specify to use OAuth I need an AdobeID ("Step 1: Link your Analytics account to your Adobe ID") but this itself requires SiteCatalyst for which I understand I need to become a paying member. Am I mistaken in any of these steps, or is there a way around this?Additionally following the directions of OAuth 3 legged Flow I can (ignoring step 1, as explained above) get a code through steps 2&3, however in step 4 calling https://api.omniture/com/token/?[...] to exchange code for access token returns 404. Has this changed since the docs were last updated?Thanks,Javier

My company is getting ready to send site visitors without JavaScript enabled to a page indicating that we are no longer supporting non-JavaScript browsing. I was asked to provide an image tag that would allow us to see how many visitors landed on that page.The developers are now asking me two questions:Can we just send all data to the secure image tag ["https://smetrics..." rather than "http://metrics..."]?And, can we just send "//smetrics..."?I have been unable to find documentation about this.Thanks!Pam