Solved

Hi there, I'm very familiar with importing/exporting data to and from Campaign using external SFTPs.I do this by created an external account for the SFTP and then building workflows like: Query --> Extract file --> File Transfer (that uses the external account). However I'm new to using the Adobe SFTP!I've read that you don't actually need an file transfer activity? Is this correct? If so, to export a file to the Adobe SFTP - I assume the workflow would look something like:Query --> Extract fileThen what settings are needed in the Extract file activity?I've tried putting in /sftp/<username>/incoming/test_file_1.csv in the "output file" setting of the Extract file activity but got the following error I've logged into the SFTP via winscp software and can see there is a path /sftp/<username>/incoming/ - so could someone explain how workflows should be configured to interact with the Campaign SFTP?Thanks David

Hi All! During page activation rep:cugPolicy is not activated and is missed on the publish instance.Environment AEM 6.5.6.0(with aem-service-pkg-6.5.6-1.0.zip installed) upgraded from AEM 6.4Author: Publish:During activation, I am logged in as an admin user. replication-receiver(part of administrators group) set as transport user for the replication agent(I also tried with admin user).At the same time at local AEM 6.5(not upgraded from 6.4), everything works fine. I would be grateful for any help or point in the right direction. Regards,Andrii  

Hi there,I'm trying to import a file that has been partitioned in 10 parts. When the import ends, this wkf must trigger another wkf through an external signal.The problem is that, since there are 10 parts, the external signal is triggered 10 times, while we need just one trigger to let this wkf starts after the previous one.This behavior is discouraged by Adobe online documentation (The activity cannot be triggered more often than every 10 minutes.), in fact the second wkf doesn't work correctly. Is there a way to import several file parts but trigger just once another workflow?How can be done? The main point is that the first wkf reaches "end" activity 10 times instead of just one and I'm unable to find a solution to trigger the second wkf just once. Please note that I need absolutley to trigger the second wkf after the previous because its activities must be executed necessarily when the import is ended. This means for example that I can't start the second wkf with a s

I am not able to open the overlay while trying to select the link in the RTE.http://localhost:4502/mnt/overlay/cq/gui/content/linkpathfield/picker.html?root=/content&_=1576997465513 It's returning 404.

Hi team,We might have a incorrect config during the initiation of the ACC database. That is the database time zone like below: We can not re-install this ACC, please show me the way to adjust the time zone of data base, thank you very much 

Can AEM designer be used to enable reader extension on a PDF?

Hi.In the editable template, can we configure the Responsive grid (wcm/foundation/components/responsivegrid) to have different columns number in different breakpoints?. E.g. I'd liked to have 12 columns in desktop and tablet and (6 in mobile). I tried this, but it doesn’t work. I have done two things.1.  I have modified grid.less file to set 6 as max-columns for mobile breakpoint and 12 as default for desktop/tablet.2.  In the root layout container, under the policy, I have set the no. of columns as 12 (by default)Under layout mode in the template, I can do resizing for desktop/tablet for 12 columns, but when I switch to mobile breakpoint it shows 12 columns instead of 6 columns. Secondly under layout mode, on the mobile breakpoint, when I resize, it doesn’t stay. It goes back to the default position. I saw another similar post, but that doesn’t have the answer. So trying again with more details.https://experienceleaguecommunities.adobe.com/t5/adobe-experience-manager/differe

Hi guys, Can we add custom columns to AEM Inbox: http://localhost:4502/aem/inbox ? E.g. Columns for 'Initiator', and 'Payload path', and update the 'Description' to add Jira details? I've seen some questions here. This one says https://experienceleaguecommunities.adobe.com/t5/adobe-experience-manager/customize-overlay-aem-6-4-inbox-screen/qaq-p/289954# not to overlay if it can be avoided. While I've seen this https://stackoverflow.com/questions/47160460/add-a-new-custom-property-to-workflow-inbox-in-aem-6-2 that looks like we could. Let us know the best approach to add custom columns to AEM inbox. This one shows how to add a custom columns, but it's under forms. https://experienceleague.adobe.com/docs/experience-manager-learn/forms/inbox-customization/add-married-column.html?lang=en#create-service Thanks in advance.

This may be a long shot, but our website went down right after we sent a big email to our list, and I'm wondering if there's a way in Marketo to find people who got errors when they clicked through to our site, so we can re-send the email to them at a later date, after the issues have been resolved.

Hi, does anyone know whether the  Anonymous Lead ID same as the Known Lead ID after it is merged?

Hi Team, Could give us a guild line or a consult about this topic?For we encountered a situation, that we are provided a interface for third-part data import.For the reason of third-part development ability, they demanded us to provided a workflow to import its data. But it seems a high-frequency execution workflow, which has two activity node like below. The two node is js for data process and xtk.session.Write(myXML). But we found that, if the external signal invoked in 50 time/second, the workflow would be very slowly. Is there any method to improve the performance of workflow?   

we want to create a report to show breakdown of assets by folder - is there an easy utility? Tried to use the ACS commons reports-> asset but if we have a ton of assets, the asset report breaks - we would love to get a breakdown by folder hopefully with indentation of folder as well

Does anyone have a cURL command to move an asset from one directory to another?

No text available

I have been tasked to move an old 6.1 AEM instance to new Azure VM's and we took the route of new installs and move the content to them and install it. I was able to do most of the content but for some content install its taking hell alot of time. Example as 30mb package with just content (jcr only and no images etc.,) its taking about 2 hours to install. When I look at the logs it complains about as below: 11.12.2020 04:55:44.107 *WARN* [discovery.connectors.common.runner.39a62bba-1273-435b-b9a7-6b4ed4d8a39d.checkForLocalClusterViewChange] org.apache.sling.discovery.impl.common.heartbeat.HeartbeatHandler checkForLocalClusterViewChange/.run: time since local instance last wrote a heartbeat is 1871111ms (heartbeatTimeoutMillis=300000, heartbeatIntervalMillis=30000 => maxMillisSinceHb=240000). Flagging us as (still) changing11.12.2020 04:55:44.107 *INFO* [discovery.connectors.common.runner.39a62bba-1273-435b-b9a7-6b4ed4d8a39d.checkForLocalClusterViewChange] org.apache.s

What is the meaning of the following error? Reckeve a Server Error in '/SecureAuth48' Application. There is not a enough space on disk. See attached.

I have installed Adobe target V2 extension with at.js version 2.2.0 in adobe launch .I also have written rule in adobe launch and did “load target” and “fire global mbox” .A4T configuration is done and working fine. I have also created an Experience target activity . For target - using the sandbox provided by adobe.Where as for AEM - using local instance localhost:4503 access via tunnel (ngrok) for example - https://f82bfea0d66d.ngrok.io/content/we-retail/language-masters/en/men.htmlAble to successfully connect from AEM to target. However when I load the page(where launch code is present) via tunnel domain name , I am not able to find any beacon in network tab when I filter it with "mbox"and also in adobe debugger I am not able to find any activity in the target tab. Where as when accessed via. , localhost:4503 able to see the call on the filter with "mbox"Please let me know whether i can access via tunnel domain name.

Hello. We have a WordPress site and are capturing the visitors UTM data on the landing page without a problem.   The problem arises if that person then navigates to a second, third, etc, page and then signs up. The UTM's from the original landing page are lost.   I am looking for help on how we can solve this.   Thank you.

Our QA teams would find it very helpful for an activity QA preview link to persist for the current user's session. Currently when testing an in-page experience:1. QA grabs the preview URL 2. QA starts testing on the first page3. If they click through on the experience or the experience spans multiple pages, they must reapply the QA params and refresh each page Expected/Ideal:1. QA params persist for the current browser session so that we can validate a consistent experience We like to keep the publishing rights very tight (which makes profile scripts less desirable as an option), and we also prefer to validate our final A/B test builds in Target against production and on actual mobile devices.

Hi everyone, We are facing the following issue. We have set up Experience Fragment template and the IO integration AEM/Target.  If we setup activities in Target and add or replace an element by Experience Fragment this works for simple components (e.g. image, text). However if we try to achieve the same using a component like product carousel the Experience Fragment does not get displayed ( the component is included in the XF template of course). So you can see it has been added but the space where it is added does not show the actual component (so it looks like an empty placeholder).  The experience fragment itself works fine so the issue occurs only if we try to use it in an activity via Target.  Has anyone experienced the same issue? Best regards  Inga

All, I am currently writing a quick workflow to create a baseline for a project through an approval workflow. This helps me work around the migration of the default baseline from the "auto creation" that Workfront natively provides. While I was in this workflow, I was trying to solve another problem that we have. We are trying to tie the issues that caused the baseline to be associated to a baseline. My thought is to iterate through the baselines and find the most recent baseline entry date. I then want to find all issues that were created after that baseline entry date and create a string that concatenates the issue number and type for all of them. Then, I will use that string to name the baseline. I am able to pull the array of entry dates for the baselines and the resolvables. But, I am struggling to get the largest date of the baseline to set the filter criteria for the issues and then creating a variable that will append all of these strings. Any guidance that you

Dear all, When sending Adobe Campaign email stats data to Analytics for reporting purposes, is there a time delay until when the data can be seen in Workspace? We have send out an email today but the data (e.g. Sent, Open, etc.) isn't showing up after 8hrs. Could anyone confirm? Thanks in advance. Best,Roxie 

Bei Surfen mit dem IE 11 können keine an Adobe versendeten Requests identifiziert werden (Seit Mittel Sep.2020)Wir suchen gerade eine Lösung , um den Traffic in Adobe Analytics wieder zu bekommen.Es wäre super wenn ihr ein paar Tipps hier geben könntVielen Dank 

How can we target for an audience created via API , lets say I have a third party service which is sending segment/audience definitions – target has APIs so one can create audiences via that.Now, on the site page – when user logs in – I can make a call to a third party to fetch some user attribute (lets say a flag which says user is premiere user).Now can we send this flag to target and make Target resolve the audience to the one created via API?

Do we have any tool to measure/ track the reputation of our IP? We are on dedicated IP.