Solved

Hi All!I could not find any information about this bug on the forum and the internet. Probably because it is hard to describe, but here we go.I'm developing custom Content Fragments in AEM.I have a custom Content Fragment Model, with couple of different fields.When I use Multi Line Text Field with Rich text as the default-mime-type(default editor view) in the CF Model definition, inserting <ul> and <ol> list in that text field, in the Content Fragment, makes the next piece of content a <div> rather than a standard <p>.It seams to be a bug, but I might be wrong. I hope also that this is the correct place to post/ask.Please find an example below.The last line in the Text Content : <div>12wqrqrwerwqrweqrwqer<br></div>Usually when next line is started in Rich Text Editor it is a <p> rather than a <div> like in this example.This happens for all fields that have the same type.View of the Content Fragment editor:Field Content read from the

Hi,  I'm trying out Revenue Explorer and can't seem to figure out how to add the count for both "No Show" and "Attended" status below to appear under "Registered". This was done using Report Type "Program Membership Analysis".    Creating a User Defined Measure doesn't work for me as ideally I would like the number for "Registered" below to appear as 50 (34 + 16) for example.      On a separate note, I also tried playing around with Formulas but can't seem to find a syntax that allows me to sum the count according to program status.      Would really appreciate the help here.    Thank you.

Can someone let me know how can we integrate whatsapp with Campaign standard

Hello there! I am working on a small manually maintained table that contains manually selected titles in a TV streaming set-up.  The table will not contain more than apprx. 20 entries added by a configurater in ACC.  Since the table is this small, I wanted to simply set "title" as the key field, since the title will always be unique and only exist once in the table. The issue is, that when the title is set as the key, the configurator is not allowed to change the value of "title" after the entry has been created (Guessing it is because it is the key field???).  I am trying to do it this way to avoid using autoPk and a custom sequence, because I found it too advanced for such a simple table. However, this issue is a bit annoying, especially from a UX point of view.  My question (short): Can I somehow allow editing a key field in a table, so I can avoid setting up autoPk="true" with a custom sequence in this case?  Addition:&nbs

How to get the client ip address in a easy way through AEM either using dispatcher or any other method.  

Hello all.If I by mistake deleted a page in AEM, I can restore it using http://localhost:4502/siteadmin#/contentTools ->Restore option. Similarly is there any option in touchUI?Since my dedicated AEM authors do not have permission to siteadmin page. 

Hi Team,I am able see the following warning in one of my workflow : "Allowing arbitrary command for pre-processing is a security concern". Please provide your thoughts to fix the warning. Thanks,Gangadhar

Hi community! Just wanted to ask a question about A4T. When you archive an Adobe Target activity - does it remove all the historical reporting for workspaces created in Adobe Analytics when the experiment was setup using A4T?

I want to understand more about the opportunity of having two or more Adobe launch scripts in one web application. Quick context:Company A and B have Adobe Analytics in their respective organization. They plan to establish analytics and tagging on both ends. That means maintaining two launch scripts with overlapping tagging requirements at some point. (Something they can establish to unify, yes) Ask:Can we maintain two launch scripts? And do separate tagging activities?If the above is not possible, are there recommendations on how these two organizations can move forward in sharing each other's analytics tagging? Thank you!

We create a AEM pages using PageManager class. Like this I want to create a XML file dynamically and store in DAM location. Can anyone tell me what API should be used to create a XML files in AEM?

Hi Team, We are trying to do the AEM -UI developer Course from the below URLhttps://solutionpartners.adobe.com/solution-partners/home/learn/credentials/certification/partner_mentorship.htmlAfter completing the Phase 1 Courses and when navigating to Phase 2 courses, the page is again redirecting back to Phase 1 courses only. Could you please suggest how do we proceed further. Regards,Varalakshmi

Hi Team, We are trying to do AEM-Frontend Developer Course from the below URL: https://solutionpartners.adobe.com/content/dam/solution/en/spp_assets/public/public_4/Partner_Learner_Journey.pdf. After completion of Phase 1 And we trying to go Phase 2 ,it is redirecting Phase 1 again . Could you please suggest how do we procced further. Thanks,Swetha

hi all, in the dialog I have tag picker and dropdown with datasource. I need to populate dropdown with list of child tags for the parent tag selected in tag picker.What I haven't managed to figure out is how to read dialog props. from datasource handler class.I tried with sling model and with WCMUsePojo. Thanks

Hi all,When i execute a delivery (recurring delivery which creates a .csv file to be extracted later) i get the following error:xt_W0.sCOMMUNICATION,Ext_W0.sPROPOSITION,Ext_W0.sDATA_ENRICHMENT,Ext_W0.sAPPT_TYPE,Ext_W0.sDIALER_RULES,Ext_W0.sDISCOUNT,Src_W0.iTargetDataId FROM wkf152336354_3990 AS Ext_W0 INNER JOIN wkf152336354_4032_1_ALL AS Src_W0 ON ()' could not be executed..iCLIENT_AGE_RANGE_MAX,Ext_W0.sDELIVERY_CC,Ext_W0.sDELIVERY_DM,Ext_W0.sDELIVERY_EM,Ext_W0.sDELIVERY_STORE,Ext_W0.sDELIVERY_SMS,Ext_W0.sWAIT_TIME_CC,Ext_W0.sWAIT_TIME_DM,Ext_W0.sWAIT_TIME_EM,Ext_W0.sWAIT_TIME_STORE,Ext_W0.sWAIT_TIME_SMS,Ext_W0.sCREATIVE,E_W0.sON_OFF,Ext_W0.iLAST_APPT_SHOW,Ext_W0.iLAST_INTERACTION_,Ext_W0.iFUTURE_APPT,Ext_W0.iLAST_CRM_CONTACT,Ext_W0.iLAST_CRM_UC_CONTACT,Ext_W0.iLAST_UC_CC_CONTACT,Ext_W0.iLAST_UC_STORE_CONTACT,Ext_W0.iNUM_CRM_UC_LAST_12M,Ext_W0.iCLIENT_AGE_RANGE_MIN,Ext_W0,sCOMMUNICATION,sPROPOSITION,sDATA_ENRICHMENT,sAPPT_TYPE,sDIALER_RULES,sDISCOUNT,iTargetDataId ) SELECT Ext_W0.iLin

I'd like to be able to use xpath on an xml rather than E4X, I know E4X works but I'd like to be able to use string expressions.e.g.var xml = new XML( <root> <item count="4"/> </root> );given the code above I'd like to be able to do something like xml.getValue("//@count"). I see that there is a method in the docs that should do what I want however i haven't been able to use it successfully.https://experienceleague.adobe.com/developer/campaign-api/api/m-DOMElement-getValue.html If anyone could please help I would be extremely grateful.

Hi all, I want to be able to monitor offers and interactions using linux command something like below: nlserver monitor interactionsreference link: Monitoring processes | Adobe Campaign And want to know what are the possible data that will be available when we use this command to monitor offers and interactions. Thanks,Somasundaram

Hello, Is there a way to flush/burst Fastly CDN cache once the modified page republished before the TTL of page on CDN. Currently i have not seen any article or approach how it should be done. I understood that at dispatcher you can set header for CDN to burst the cache via setting TTL based on path. Looking for response if there is better way to handle this with Fastly CDN. Thanks!!

Hello again!   One of my final tasks before I leave is to set up the Revenue Cycle Modeler for our new Advanced Journey Analytics.   I have our RCM setup/edited/adjusted now, and while we already had Google AdWords Conversions connected (I didn't set this up so unfamiliar with what it is/does and how it differs from regular Google AdWords in this instance), I just added Google AdWords this morning - however, I'm not seeing any change in the dropdown menu for each stage (only Facebook shows):     Is there something I'm missing?I'm using this product doc as a guide. We use both Facebook and Google Ads so I'd ideally like to use both in there if possible.   Once this is sorted, I can go through and assign lead as per the Approving Stages and Assigning Leads documentation.   Many thanks in advance for any help! Michelle

When we want to add some redirects, the process takes several weeks and costs tens if not hundreds of thousands of pounds.  This is because we have to update the dispatcher configs in our project, build it several times on dev (which takes on average 1.5 hours each build) to test it, then schedule the change to go into test env, then UAT env, then stage, then prod, each time doing a 1-2 hour build, and several rounds of smoke tests (as there is no way to ensure that what was build in one env is the same as what was tested on another env (as Adobe remove the ability to deploy a version tested on one env to another) It has been said that Adobe might streamline the process to update dispatcher configs. I saw this: https://experienceleague.adobe.com/docs/experience-manager-cloud-manager/using/getting-started/dispatcher-configurations.html?lang=en However, it's not clear if they are saying that dispatcher configs are part of our current massive build and deploy ever

Hi, I'm coding a email template but I keep reproducing an issue that I haven't had luck sorting out the cause of though I have resolved it in some way once or twice over the past week or two. The elements in my template with the "mktoModule" class are removed when using Sending Sample Email, breaking my template layout in all the email clients I have tested in. Instead of a nice column, I get a mess of everything in a single horizontal row. Marketo's editor describes no errors and the Preview looks as it should, though some classes are being duplicated on other unrelated elements... Below is my source code. I removed a number of modules for brevity, but this is reproducing my issue.   Let me know if there are any more details I can provide.   Thank you in advance for the help!       <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" lang=

We have to use two different API's data to one ICC letter. Created one FDM using these 2 sources with different services. Using a backend service created one JSON file the necessary data. Now how to attach this JSON file to this Print Channel. Gone through the examples given in the experience league and other sites as well.Generating Print Channel Document by Merging Data | Adobe Experience Manager It says something like this in one of the example project dataOptions.setServiceName("ccm-print-test");There is also classes created on this "ccm-print-test" service. But unable to load this example project into server to see if any bundle service created for this service class.  Our request is to create get ICC letter that gets the dynamic data from the 2 different sources, and we created one FDM and attached that to the letter and  selected the Prefill Form Data Model service. Trying to send the JSON File data to this as given in the example class. &

Dear AEP Community,within in the B2B Schemas, what is the acute difference betweenXDM Business Campaign Members class and XDM Business Marketing List Members classMany thanks and Appreciate your response.. Best regards,Praveen

Running the below query throws error [2]. Is it the like operator causing trouble? Do we know how i could avoid traversal warning?Explain query throws a 150000 traversal limit error. path = /content/dam/en/we-retailtype= nt:unstructured1_property=metadata/@dc:format1_property.operation = like1_property.value = image/%p.limit =-1 [2]GET /libs/cq/search/content/querydebug.html HTTP/1.1] org.apache.jackrabbit.oak.query.QueryImpl Traversal query (query without index): select [jcr:path], [jcr:score], * from [nt:unstructured] as a where [metadata/dc:format] like 'image/%' and isdescendantnode(a, '/content/dam/we-retail/en') /* xpath: /jcr:root/content/dam/we-retail/en//element(*, nt:unstructured)[(jcr:like(metadata/@dc:format, 'image/%'))] */; consider creating an index

Hi community, Observed that there may have scenarios where some users' opens are not captured even though they have clickthrough-ed. Logically, they would have to open the email before clicking the links. One of the common possibilities is that they had disabled downloading of images in their mail clients, as such preventing the tracking pixel from capturing the opens. This causes a downside to having a lower open rates than expected. Is there an available configuration to enable Adobe Campaign to automatically register opens as long as users perform an email click?

Is there a way to manage (consulting and/or deleting) previously collected user/client information on Adobe Analytics? Do I need to work with any API Integration or an interface which I can manage all user information? Any thoughts? Thanks,