Solved

Hi Community,We have set up the LinkedIn Ad Form Launchpoint connection. It is authorized and should be running however it is not showing up as a filter or trigger in our smart list. Is there any further steps we need to take to have this show-up in our system to use? Thank you!Jimmy

Hi,recently we sent out an email campaign to a highly-engaged list, consisting of mainly long- term subscribers who are familiar with the type of content as they receive it periodically.  The email was also very similar in terms of structure and content to those sent before, so we again expected successful campaign.As the emails were sent I noticed that suddenly there was a huge spike in the percent of undelivered mails, reaching almost 7 % (for comparison, typical percentage of undelivered emails for this segment was between 0.1% and 0.3%). I did a bit of research and found out the vast majority of emails were suspended for being spammy (spamcop, poor reputation - suspend code 550 5.7.1.). I also noticed that there are domain clusters that blocked the email (for example, nobody from the domains "xy.com" or "dada.com" received the email).As explained before, it is highly unlikely that so many recipients suddenly stoped liking the mails or marked them as spam, so I would appreciate any

Hi,I am using AEM 5.6.1 and have developed a component using boot-strapper and jQuery. The user interface is designed in .jsp (html, css and Javascript). When we drag and drop the component onto Parsys, the UI is showing but getting resized in design/preview mode. This is disturbing the actual look and feel.Does anyone have idea why this is getting resized? Can we do anything for Parsys?Regards,Kishore

While trying to pull data I receive the following error messages:Error ID in Workspace: 755edbe5-604c-4057-b089-203e464decbbError message in Ad Hoc: Report generated an error (300)

Hello, I'm completely new to Adobe Analytics and I'm trying to figure out how to display the full URL when bringing up a report. When I navigate to Reports -> Site Content and select Pages, I see a few links with the ".html" at the end displayed while a majority of the other links don't show it, rather it shows partial of the domain. And if I export the report to excel, I get the same result that is displayed to me in the Pages Report.So how can I display the whole URL on the Pages Report? Thank you

HiI had someone ask me today if they could pull all email based activity of all contacts from one specific account. So he basically wants if they interacted with our contact e.g. opening, clicking etc.So I know you can grab the activity logs of single contacts but is it possible to pull a report based off the activity of all contacts under one company account? Or do i have to literally go 1 by 1 or use a smart list and tag all relevant filters (I am guessing this is the most efficient way of doing it?)?Thanks in advance Rich

Hi there. We've been having issues getting Doubleclick (DCM) click trackers to work when the Marketo token (mkt_tok) is enabled. We've tried both dynamic and static click tags but these all resolve in aspxerrorpath or error pages when clicked within an email. The only way the click trackers work is when we disable mkt_tok tracking. However this isn't ideal as we'd like to be able to track on-site behaviour!Has anyone had a similar issue and is able to shed some light into how they've fixed this?

Any reason for having the seprate user generated content node and not having it on the same node as the page . 

Hi All,Whenever we activate a page from siteadmin, it opens a dialog box with the list of assets which are not activated and provides us an option whether to activate it or not. I want to expand this functionality to other pages, which are being used on that page(which I have clicked to be activated).Any suggestion/ help would be appreciated.Regards,Aman

We have a comprehensive scoring system in place that both scores leads up based on good behavior and decays leads' scores based on a lack of activity. Our lead scoring works in conjunction with our lifecycle model, which we use to populate SDR queues. We are implementing a new SDR dialer right now that allows SDRs to mark a general disposition and sentiment after each call.Our decay program is set up to decrease leads' scores based on no interesting moments, which unfortunately aren't being created from the SDRs' activity in the new dialer. We are not able to score leads up for good calls or clicks in sales emails and are thus not able to create interesting moments, resulting in leads decaying when they are actually being worked.Does anyone know any way to sync custom SFDC activity on the task object over to Marketo to allow us to create interesting moments for leads and score them up as they are being worked?

Does anyone know how to allow a recipient of a Marketo email to unsubscribe with 1 click from within the email?I'm trying to avoid forcing the recipient to have to visit our standard unsubscribe page and click a 2nd time before being unsubscribed and seeing our confirmation page.Thanks!Will

Hi - we've been using Marketo for over a year, but we are just now starting to use Marketo forms/landing pages to gate some of our content.My question - will a lead need to fill our an entire form every time they want to download a different piece of content? Or will progressive profiling capture the lead data?For example, User A gets to a landing page to download an eBook, fills out the name/email address and gets the eBook. User A comes back to our site a few days later for another piece of gated content. If we use the same form on all our landing pages, will they have to fill out the entire form again from the top or will they be cookied and therefore progressive profiling kicks in (even though it's a different landing page/form?). If not, is there a way around this? Seems like bad user experience to have to fill out a form every time someone wants content. Thanks!

Hi allUpgrading from 6.1 to 6.3.There are components in the 6.1 libs that have been deprecated and removed from the 6.3 libs.Application components that reference removed/deprecated libs components will throw up errors.Question What is best practise for fixing this?Copy what used to be in the libs directory of 6.1 to apps directory of 6.3?Implement whatever new feature adobe has recommended as replacement?Is there option 3?Thanks

Hi team,I am testing Bootstrap Connector in AEM 6.0+. In AEM 6.3, once the connector installed, a system user 'bootstrap-service' with service mapping and permission is ready to go, however, in AME 6.1, after installing the connector, the system user is created but no permission and service mapping configuration.Do I have to give permissions from http://localhost:4502/useradmin  and map user with service on http://localhost:4502/system/console/configMgr pages?Thank you.

Hi all,I'm trying to figure out if there is a way to call a stored procedure by customer and store the output of the stored procedure into the workflow temp table and assign it as a targetData.For example, we have a stored procedure on our sql server called GetCustomerName, with an input of the customerId. The output is the customerName. I have the code so far below, but I'm not sure how to proceed further, any help would be greatly appreciated!  var customers = xtk.queryDef.create(    <queryDef schema={vars.targetSchema} operation="select">      <select>        <node expr="@id" groupBy="1" />      </select>    </queryDef>  ).ExecuteQuery();     for each (var customer in customers){     sqlExec(EXEC GetCustomerName @customerId);          };BestJim Xue

Hi,I'm writing a test case for a sling model. I'm able to load JSON and get the resource but when I'm trying to adapt that resource into class, it's coming as null.Could you check and tell what I'm missing?SlingModel class:import javax.annotation.PostConstruct;import org.apache.commons.lang3.StringUtils;import org.apache.sling.api.SlingHttpServletRequest;import org.apache.sling.models.annotations.DefaultInjectionStrategy;import org.apache.sling.models.annotations.Model;import org.apache.sling.models.annotations.injectorspecific.ScriptVariable;import org.apache.sling.models.annotations.injectorspecific.ValueMapValue;import com.day.cq.wcm.api.Page;@Model(adaptables = SlingHttpServletRequest.class, defaultInjectionStrategy = DefaultInjectionStrategy.OPTIONAL)public class CarouselSlide {final private static String CAROUSEL_TEMPLATE = "/apps/poc/templates/carousel";@ScriptVariableprivate Page currentPage;@ValueMapValueprivate String backgroundImage;@ValueMapValueprivate String gradientColor

Hi, we are in the testing phase of utilizing MSI within Salesforce and I am putting together the materials and training documents for our teams. A couple questions have come up that I am having a hard time finding an answer to online and/or my testing has been inconclusive:1. Do Interesting Moments need to be created at the program level?2. Do we need to create the trigger tokens that Interesting Moments use? If so, where? (e.g. trigger.xyz)3. What kind of access does Marketo give to MSI users? For example, if a Salesforce user John Doe is using MSI and he clicks "View this in Marketo" -- does he need a Marketo login? What is the best type of access togrant this user so he can see what he needs to without modifying anything inside our Marketo instance?If anyone has any information they can share regarding these, I'd be very grateful. Thank you!

I need to add the second report suites into a property and it complained that I have to setup the tracking server and SSL tracking server. I am wondering where can I get this info?

Hi,I have published one offer space (Inbound Web Recipient New) and  2 offers in the offer catalog. The eligibility criteria of my offers depends on my interaction schema columns. I followed the documentation and created a HTML page with the interactionProposalScript and server details.Also included a <div> tag to refer to my offer space. <div id="i_inboundWebNew">        </div><script id="interactionProposalScript" src="http://ac167us.adobedemo.com/nl/interactionProposal.js?env=liveRcp&cb=alert" type="text/javascript">        </script>    I included a interactionGlobalCtx variable to pass my interaction value. When I run this HTML , it gives me an error. It says <propositions> The offer space with the key hasn't been published. I have attached the screenshot. Please help me with the same.  Thanks.

Hi.I try to integrate to adobe campaign API.I use example from Web service calls  to try receive session and security token.Here is my sample code from node.jsvar body = '<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:xtk:session">' +   '<soapenv:Header/><soapenv:Body><urn:Logon>' +   '<urn:sessiontoken/> ' +   '<urn:strLogin>username</urn:strLogin> ' +   '<urn:strPassword>pass</urn:strPassword> ' +   '<urn:elemParameters/>' +'</urn:Logon></soapenv:Body></soapenv:Envelope>';request({   headers : {   "Content-Type" : "text/xml; charset=utf-8",   "SOAPAction" : "xtk:session#Logon"   },   uri: this.loginUrl,   body: body,   method: 'POST'}, (err, response, body) => {   console.log(err);   console.log(body);});And here is body response<?xml version='1.0'?><SOAP-ENV:Envelope xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:xsi='http://www.w3.org/2001/XMLSch

Hi,I just wanted to get confirmation on what this actually means. For example, I have a smart campaign scheduled to run on a certain date, and in my smart list, there are people who appear multiple times. If my campaign is set to "Each person can run through the flow every time". My flow is set to send an email at the time i schedule the smart campaign, then wait 10 days, then if the person didn't click the 1st email sent, they will be sent the 2nd email.I'm wondering if people will get duplicates of the emails because they are on the smart lists multiple times.  Thanks!

Hi ,I have to parse the RTE(Rich Text Editor) content data before saving for example needed to remove some new line(\n) and carriage return(\r)  characters before save.Please advice.smacdonald2008​Thanks,Manjunath DJ

I want to break down the none bucket with report builder or an API call. Is it possible to build a report similar to the one below with report builder or an API call?

Why does the total click number shown in the Dashboard differ from the Email Performance Report total?In this case, the total clicks in Dashboard is 93 while the total clicks for the same email is 143.Is the dashboard click number based on uniques?thxJon

Hey guys,I'm new on AEMSo, I have a question. Which is the default log level for any instance? I'm not sure but I think that's INFO log, Am I right?Thanks for sharing!