Solved

Hi All,I have a component authored in like more than 100 of pages. Now I wanted to make changes to the content of that component. Is there any way in AEM so that the changes should be reflected to the component on all the pages? or any workaround for it?Any help will be highly appreciated.Thanks,Hafeez

I want get the length or size of my list in aem sightly,so is there any property like size to get the total count of elements in the list?

Hello everyone,I would like to ask if someone knows whether Adobe Analytics Alert system recognizes fractioned threshold numbers (as "0.2") or not. Does it approximates a result of 0.34 to 1.00 perhaps?Thanks in advanceFrancesco

Hi,I'm working on the error page for multiple countries and languages. I'm using the ACS common for error handling and I just had one domain for all countries and languages.example www.mycompany.comContent structure/content/myproject/gb/en/..../content/myproject/hk/en/..../content/myproject/sg/en/....I enabled the DispatcherPassError  0 based on the guide line from ACS Common and worked with error page under each countries and languages also.It's worked well in publisher.I have been created a vhost for my domain : www.mycompany.com to rewrite the content and sling mapping under /etc/map. It's ok with existing page.The below is my rewrite rule for my domain ( www.mycompany.com) # Append .html to requests lacking an extensionRewriteCond %{REQUEST_URI} !^/.*\.[A-Za-z0-9]+$RewriteRule ^/(.+)$ /$1.html [R=permanent,L]RewriteRule    ^/(.*)\.html$  /content/myproject/$1.html [PT]My issue: when i input wrong URL from dispatcher, it didn't map with error page.Also how i

Hi I am trying to sync users between two publishers through Author. However, I am getting following error on publisher where I created the user. Caused by: org.apache.sling.distribution.serialization.DistributionPackageBuildingException: java.io.IOException: No such file or directory        at org.apache.sling.distribution.serialization.impl.vlt.JcrVaultDistributionPackageBuilder.createPackageForAdd(JcrVaultDistributionPackageBuilder.java:100)        at org.apache.sling.distribution.serialization.impl.AbstractDistributionPackageBuilder.createPackage(AbstractDistributionPackageBuilder.java:61)        at org.apache.sling.distribution.serialization.impl.ResourceSharedDistributionPackageBuilder.createPackage(ResourceSharedDistributionPackageBuilder.java:66)        at org.apache.sling.distribution.serialization.impl.vlt.VaultDistributionPackageBuilderFactory.createPackage(VaultDistributionPackageBuilderFactory.java:136)        at org.apache.sling.distribution.packaging.impl.exporter.LocalDi

HiI am doing some work for a client and I have access to processing rules. I am not certified in processing rules, I am however developer certified. Do certain companies get a free pass or have Adobe waved the need for certification now. I'm pretty sure I read somewhere that they had. Cheers

Hi There,I am trying to set modify permission for cq:annotation while I am having read permissions set for the page.             - path: /content/geometrixx/${locale}              permission: allow              actions: read            - path: /content/geometrixx/${locale}              permission: allow              privileges: rep:write              restrictions:                rep:glob: '*/cq:annotations/*'              keepOrder: truebut since I have set read permissions, it is not allowing to create annotation. Is there anything I am missing in this or one of the limitation of AEM

Hi all,Does anyone know the default attribution model? The information that I've found so far is quite ambiguous, and haven't been able to get a solid answer just yet.Thanks in advance for your help!

Hi,Is ToughDay2 officially out? Did I miss any announcement after GEM webinar? It seems so: Tough Day and Index of /repositories/releases/com/adobe/qe/toughday2/0.2.1 Anyone used it so far?

Am I the only one that is not seeing the link to Marketing Discussions missing from the drop down menu at the top?You can still access it here: Marketing Central  Maybe I have missed something.

I just created a new report suite and I noticed that there are 4 conversion variables as default. I am wondering evar1 has to be used as Internal Campaign? Since I have some existing report suites and we used eVal1 for other purpose. In this case, should I change the old setting or align with our other suite setting and change eVar1 to other things?  Thanks 1  Internal CampaignMost Recent (Last)VisitText StringEnabled 2  Internal Search TermsMost Recent (Last)VisitText StringEnabled 3  Custom eVar 3Most Recent (Last)VisitText StringEnabled 4  Custom eVar 4Most Recent (Last)VisitText StringEnabled

Hi ,I was working with Web functionalities, Online Survey in Adobe Campaign. I created a survey and published it. However, there is a Adobe campaign logo which is appearing in all survey pages. how can I remove it from the survey page?Regards,Senthil

Hi Community,We have set up the LinkedIn Ad Form Launchpoint connection. It is authorized and should be running however it is not showing up as a filter or trigger in our smart list. Is there any further steps we need to take to have this show-up in our system to use? Thank you!Jimmy

Hi,recently we sent out an email campaign to a highly-engaged list, consisting of mainly long- term subscribers who are familiar with the type of content as they receive it periodically.  The email was also very similar in terms of structure and content to those sent before, so we again expected successful campaign.As the emails were sent I noticed that suddenly there was a huge spike in the percent of undelivered mails, reaching almost 7 % (for comparison, typical percentage of undelivered emails for this segment was between 0.1% and 0.3%). I did a bit of research and found out the vast majority of emails were suspended for being spammy (spamcop, poor reputation - suspend code 550 5.7.1.). I also noticed that there are domain clusters that blocked the email (for example, nobody from the domains "xy.com" or "dada.com" received the email).As explained before, it is highly unlikely that so many recipients suddenly stoped liking the mails or marked them as spam, so I would appreciate any

Hi,I am using AEM 5.6.1 and have developed a component using boot-strapper and jQuery. The user interface is designed in .jsp (html, css and Javascript). When we drag and drop the component onto Parsys, the UI is showing but getting resized in design/preview mode. This is disturbing the actual look and feel.Does anyone have idea why this is getting resized? Can we do anything for Parsys?Regards,Kishore

While trying to pull data I receive the following error messages:Error ID in Workspace: 755edbe5-604c-4057-b089-203e464decbbError message in Ad Hoc: Report generated an error (300)

Hello, I'm completely new to Adobe Analytics and I'm trying to figure out how to display the full URL when bringing up a report. When I navigate to Reports -> Site Content and select Pages, I see a few links with the ".html" at the end displayed while a majority of the other links don't show it, rather it shows partial of the domain. And if I export the report to excel, I get the same result that is displayed to me in the Pages Report.So how can I display the whole URL on the Pages Report? Thank you

HiI had someone ask me today if they could pull all email based activity of all contacts from one specific account. So he basically wants if they interacted with our contact e.g. opening, clicking etc.So I know you can grab the activity logs of single contacts but is it possible to pull a report based off the activity of all contacts under one company account? Or do i have to literally go 1 by 1 or use a smart list and tag all relevant filters (I am guessing this is the most efficient way of doing it?)?Thanks in advance Rich

Hi there. We've been having issues getting Doubleclick (DCM) click trackers to work when the Marketo token (mkt_tok) is enabled. We've tried both dynamic and static click tags but these all resolve in aspxerrorpath or error pages when clicked within an email. The only way the click trackers work is when we disable mkt_tok tracking. However this isn't ideal as we'd like to be able to track on-site behaviour!Has anyone had a similar issue and is able to shed some light into how they've fixed this?

Any reason for having the seprate user generated content node and not having it on the same node as the page . 

Hi All,Whenever we activate a page from siteadmin, it opens a dialog box with the list of assets which are not activated and provides us an option whether to activate it or not. I want to expand this functionality to other pages, which are being used on that page(which I have clicked to be activated).Any suggestion/ help would be appreciated.Regards,Aman

We have a comprehensive scoring system in place that both scores leads up based on good behavior and decays leads' scores based on a lack of activity. Our lead scoring works in conjunction with our lifecycle model, which we use to populate SDR queues. We are implementing a new SDR dialer right now that allows SDRs to mark a general disposition and sentiment after each call.Our decay program is set up to decrease leads' scores based on no interesting moments, which unfortunately aren't being created from the SDRs' activity in the new dialer. We are not able to score leads up for good calls or clicks in sales emails and are thus not able to create interesting moments, resulting in leads decaying when they are actually being worked.Does anyone know any way to sync custom SFDC activity on the task object over to Marketo to allow us to create interesting moments for leads and score them up as they are being worked?

Does anyone know how to allow a recipient of a Marketo email to unsubscribe with 1 click from within the email?I'm trying to avoid forcing the recipient to have to visit our standard unsubscribe page and click a 2nd time before being unsubscribed and seeing our confirmation page.Thanks!Will

Hi - we've been using Marketo for over a year, but we are just now starting to use Marketo forms/landing pages to gate some of our content.My question - will a lead need to fill our an entire form every time they want to download a different piece of content? Or will progressive profiling capture the lead data?For example, User A gets to a landing page to download an eBook, fills out the name/email address and gets the eBook. User A comes back to our site a few days later for another piece of gated content. If we use the same form on all our landing pages, will they have to fill out the entire form again from the top or will they be cookied and therefore progressive profiling kicks in (even though it's a different landing page/form?). If not, is there a way around this? Seems like bad user experience to have to fill out a form every time someone wants content. Thanks!

Hi allUpgrading from 6.1 to 6.3.There are components in the 6.1 libs that have been deprecated and removed from the 6.3 libs.Application components that reference removed/deprecated libs components will throw up errors.Question What is best practise for fixing this?Copy what used to be in the libs directory of 6.1 to apps directory of 6.3?Implement whatever new feature adobe has recommended as replacement?Is there option 3?Thanks