Solved

Hello , How to get the run mode in Adaptive form using rule editor.Is it good idea to expose this values at client side , by having a call to custom  AEM servlet in rule editor Please provide input Regards,Srinivas

Hello,I'm using AEM aa CS. I have an adaptive form that needs to submit the document of record to a SharePoint list. The submission of form data only works as expected. However, when I try to save the DoR it doesn't submit. What configurations do I need to do?What type of column needs to be set in the SharePoint list in order to save the dor? Also, how do I bind the DoR to the model?Any documentation, or examples, would be greatly appreciated. Thank you,Ana

For my Proofreading team, I would like to have a report to see all upcoming task approvals based on a role ID to see what work may be coming through. I tried messing with EXISTS statements from previous forum posts to see if I could manipulate any, but I didn't have any luck. The approvalStep name usually contains "Proofer" as well, but I couldn't figure out a way to filter by that either. I appreciate any suggestions on how to approach this. I don't want to only see current/active approvals either; I want to see all projects with task approvals that could come through.  Thanks for any support!

What is the difference between Channel (email) and Email Identity in the landing page opt-out? In the documentation, it is mentioned that opt-in or opt-out applies to all email addresses of a profile with Channel (email). In the case of work email, billing email, etc., how does AJO recognize communication preferences for all emails? https://experienceleague.adobe.com/en/docs/journey-optimizer/using/landing-pages/landing-pages-design/lp-content   A profile would receive an email based on the Execution field; let’s assume it is personalEmail.address. It is always one email address to which the email would be sent through multiple email addresses available at the profile level.. I would like to understand how the consent is registered back into the profile when there are numerous email addresses, in the case of Channel (email) and Email Identity.

Hi, I have created offers based on male and female audiences, when i try to evaluate the decision scope in Simulation with test profile, it only gives the fallback offer, but total profile estimate for both male and female audiences is 1 or more.    

Hi Team,I've tested the exitcriteria, but it's not working as expected. Could you please help me identify what might be wrong with the configuration? Test Use-Case:I am creating two audience segments: one containing 4 people (including myself) and another specifically for my profile.While testing, I created a "Read" audience, added the 4-person segment (including my profile), and set exit criteria to exclude my profile. After activating the journey, the email was only sent to the remaining three people. However, I still received the email as well, despite my profile being included in the exit criteria. Can anyone help me understand why this is happening? I have attached a screenshot for further clarity. @mohan_dugganab @satheeskannak @anuhya-y @davidkangni @pradeep_kumar_srivastav  

I tried to convert/upgrade my (legacy) Report Bulder reports with the new Report Builder Add-In.But only a few requests were converted. For the most requests all segments were deleted from the report.Only got the error message: "Upgraded:segmentNotAvailable". The segments are named and created by me. With legacy RB I didn't face any problems. Thank you for any suggestions or hints for troubleshooting!  

Hi all, I created a freeform table with visits by tracking code. Is there a way to sort the tracking codes not by the highest number of visits but by other criteria? (for example, the order requested by the customer). I tried to create one by dragging the tracking codes one by one, but when there is the one with the highest value it goes up in the table.

I am working for Adobe Campaign classic support team, and i am interested to learn developer activities and to become ACC developer, how can i get sandbox access to learn workflows, deliveries and campaigns?

Try to reset the admin password following below linkHow to reset the admin password in AEM 6.3 | Adobe Experience Manager but fail and shows that  WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0x80000002. Windows RegCreateKeyEx(...) returned error code 5.Found admin node: SegmentNodeBuilder{path=/home/users/D/D4z92KBRNNErnNt3l1yf} How can I reset the admin password in this case?

Hi there. How do I implement a dynamic Table of Contents in Guides? Where can I find the instructions? Thank you!

Which one? 

I'm trying to write a calculated text field that will make it so that we no loner have to manually select a "Tier" for each of our projects on their custom forms. Use Case: Current-state, after a request is converted to a project and the project is built out, the project manager looks at the total planned hours for the project and then selects the correct corresponding "Tier" in a custom form. We'd like to make a calculated field that automatically picks the correct tier instead of the project manager needing to do it (and possibly selecting the wrong tier, which goes into our reports and is something we have to fix fairly regularly). Example: Tier 1 projects are >=100 project planned hours, Tier 2 are <= 50 project planned hours hours, Tier 3 projects are <=25 project planned hours Every code I have written has failed to accurately convert (project) planned hours to a tier. The code below will assign a 45.5 planned hour project to "Tier 1" even though it should

Getting this error on login

Hi everyone, could someone explain to me the difference of the following:Let's say, I have a Prop which stands for an event action, e.g. load of an application on a page. And I want to know the visits that included the load of that application. What I do, is drag 'Visits' into my metrics column of the free form table and then create a segment with Hit scope and the propX equals 'load of that application'. I get 15,000 Visits.I wanted to also create a fallout visualization and when I set the scope 'visit' for the Fallout and drag the propX with the value 'load of that application', I get 17,000. I then created a segment from that touchpoint to compare this with the freeform table and noticed that instead of a hit based segment like above in the free form, this is a visit based segment. The segment with the 17K includes the same amount of propX values for that application load I segmented on, but when I drag the propX dimension into the rows, I can see, there are also visits for other va

Hi, I am a newbie to AEM and was trying to understand ignoreurlparams which is very confusing. Could you help me with which urls would be cached and does order also has significance? /ignoreUrlParams{/001 { /glob "*" /type "deny" }/002 { /glob "param1" /type "allow" }/003 { /glob "param2" /type "allow" }}  URL 1: /mysite/mytest.htmI?param2=aURL 2: /mysite/mytest.htmI?param1=s&param2=a&param3=hURL 3: /mysite/mytest.htmI?param10=localURL 4: /mysite/mytest.htmI?param1=sURL 5: /mysite/mytest.htmI?param2=a&param1=s  

Hello folks, I have a quick doubt on a specific scenario while setting up nurtures in marketo. I need to set up nurture in a way that if someone enters the nurture through a specific piece of content (maybe through an adhoc email from an email send campaign), don’t send that person the email related to that content again as they’ve already seen it. How do I exclude this in my nurture set up. Since there can be so multiple campaigns with a similar piece of content, can be one off email send, could be from a recurrence campaign etc. How do I make sure to exclude these without manually checking what those campaigns or pieces of contents are. Is there a way I can do this in one go with a logic? Please advise. Thanks in advance!

i want to be able to display the % of how much this one product takes on from this add to cart origin? is this possible?  

Hello! As the 3rd party gas CTA Account Manager, I had a CTA reach out on behalf of our mutual clients. The question they posed is:     One of our customers has informed us that PG&E communicated upcoming changes that may affect prior access, mentioning that the access would need to be reauthorized. Could you please clarify if all customers would need to create a new MyEnergy login, and if previous usernames and passwords will no longer be valid? Additionally, any insight into these changes and how they will impact user experience would be greatly appreciated.

Hi Team, I have a requirement how to query assets using a particular tag in AEM using GraphQL. I have even tried with chat GPT and Copilot but not getting required output some errors are coming. Below are the errors I am getting kindly help on this

Hi Community, 1) Is it possible to monitor the real-time email send volume in Ajo?2) Adobe must be capable of supporting the daily sending volume without any limitations? @satheeskannak @mohan_dugganab @anuhya-y @davidkangni 

My client is already having a few sites on AEM as a Cloud Service platform. They wish to bring in few more sites now on to the platform, but with EDS and UE features enabled along with Document Based Authoring. As obvious, their existing sites are all based on Editable Templates & Sightly Components. I plan to instrument those components for Universal Editor. But here are a few questions I have in my mind - How do the content editors author new EDS blocks/sections on those normal AEM Sites pages given that those site pages were not developed on EDS Site template and are based on parsys from drag-n-drop which UE does not recognize. Even on editing all such pages (2000+) from AEM Sites Console, Universal Editor does not open up automatically.How does the blocks created on Google Doc / Word documents map to the blocks that we will be developing on EDS client-side codebase so that once the pages are created using Document based authoring, Content Editors can edit them further

Is there any official Adobe documentation on working with a repoless setup for XWalk projects? Specifically, I want to use a single repository while managing different content sources for various feature branches. Is there any guide that explains handling multiple branches and multiple content sources effectively?

I have a checkbox in a multifield based on which i want to show/hide certain multifield items. I have tried following the instructions in  (/apps/acs-commons/touchui-widgets/showhidedialogfields/source/showhidedialogfieldstabs.js ) however i cannot get this to work. It only hides my fields on initial load of dialog but upon checking the checkbox it does not show the fields at all. Checkbox checked value is string true. Unsure of what i am doing wrong here.Node structure for checkbox (enableLinks)granite:data node for checkbox Show/hide field container properties, it contains a pathfield and select dropdown field  granite:data node for show/hide container     

when i am running  the aem up command it showing the spanwn UNKNOWN error due to which localhost:3000 is not opening up. what could be the reasons behind this error. can anyone tell me how to resolve it.