Solved

Hi,We have a requirement to have a custom link plugin where link will contain & char but RTE is converting it to & while storing the data into jcr.Is there any way to prevent it from being converted and have it as & only?

Hi, I am currently trying to create a segment based on visitors Internet Service Provider/domain. The objective is to only show the visitors that has a ISP that provides the company/university network.I would therefore like to filter out ISPs that contain words such as 'internet', 'service' , 'communication', 'cable' etc.Appreciate input on the following:1. Is this possible in segments?2. if yes, how should I set it up?3. if no, any other suggestions on how I could filter this data out?Thanks,Hanne

In AEM Forms Workspace, when User A requests access to the queue of User B, User B gets an email notification with "Share Queue Request" in the subject line.  Clicking the link opens AEM Forms Workspace with a new item in the TO DO list of User B.  That item is associated with some sort of Flash interface that isn't loading.  Right clicking on it shows "movie not loaded". I'm trying this in IE as well as Firefox.  Neither works.  I've also tried different settings on IE compatibility view with no luck.Flash is also used in AdminUI for managing queue sharing (home -> services -> forms workflow -> shared queue uses a Flash interface).  This is working fine for me. So, I know that Flash is correctly installed and runs in my browser. Has anyone else seen this problem?  Any suggestions for troubleshooting?  Thanks.

I have a component of resource type - granite/ui/components/foundation/form/pathbrowser , i need to make sure in case of internal link .html to be appended whereas in case of external link it should be as it is no .html appending. Can anyone help?

We are needing to add a disclaimer to all of our Marketo forms. So I added a rich text field with the disclaimer and placed it right above the submit button. However, there is a problem with our forms that have progressive profiling in them. There is no way to place the rich text field with the disclaimer below the the progressive profiling section. Therefore, if the progressive profiling is used, the disclaimer shows up between two input fields and looks bad. Is there any way to place our disclaimer below the progressive profiling section? Or is there a way to place the disclaimer below the submit button?

Hi All,We are using 6.3 and just giving <div data-sly-test="${wcmmode.edit}">Edit Mode</div> is not working.If we remove editor.html/ from the url and reload it, the Edit Mode text still appear.Tried the thing mentioned in http://wcmaem.blogspot.in/2016/07/how-to-check-touch-ui-mode-in-sightly.html but same issue, only adding ?wcmmode=disabled at the end of the url is working.Is someone have a workaround ?Regards

I am new to Marketo. I have created a form with a "Date & Time" select field (e.g. Friday 14 September, 11:00) where the person can select a number of days and times. When I receive an alert email triggered by the form being filled out, the date shows up although not the time. What Token would be appropriate to use in this situation? What else could I do?

Hi everyone,We often send out discount offers/special deals to customer groups via Marketo, and were hoping to start to use automated Smart List subscriptions to send a .csv of recipients to our Customer Service team (They can upload this list into their own system and have the recipients automatically tagged as having received various offers without needing to constantly query our comms plans...)Currently, it appears that marketing unsubscribed/Marketo blocked users will still feed into the smart list subscription.  This means we're needing to add an additional flow step to add users to an a new smart list *after* the  email has sent, to set up a smart list subscription based on 'email delivered'...but we'd really rather not go and retrofit this to every single campaign, when a smart list already exists within them (and the function for a simple list subscription!!)Is anyone aware of a setting that can exclude unsubscribed/marketing blocked users showing in list subscriptions? Or a me

I have a few components that were created for CQ 5.4 and use custom actions in the editbar. As we migrate to AEM 6.1, I'd like to support these in both Classic UI and Touch UI. I found this demo https://github.com/Adobe-Marketing-Cloud/aem-authoring-extension-toolbar-screenshot that I've tried implementing, but it looks like that adds the action to all components - I only want it on certain ones. Additionally, I'd prefer not to define my handler directly on a node in the repository - having to ensure valid XML in my code would be pretty challenging. I found this example http://experience-aem.blogspot.com/2015/04/aem-6-sp2-touch-ui-open-component-dialog.html, but I'm getting JS errors when I try to use it or adapt it. Is this somethign that's possible, and are there examples out there for it? Thanks

Hi there,I sometimes confuse myself with the concept of eVars, props and success events,I keep on going back to the basics but can't quite wrap my head into the persistent concept. Is there any good example for this?e.g.If there is a credit card application funnel (step 1 to 5 )When eVar2 in step 1 is "Credit card application" , and it says that the value is persistent, why do we still need to call eVar2 for steps 2 - 5 ? don't we do that to props anyway? and it make sense for props because its used for individual page traffic report.Hope that someone can enlighten me a little bit more in this.

Hi All,We just discovered a limitation of the audit trail today.A email program was supposed to send about 100 emails and instead sent hundreds... of thousands of them. Everyone in the organisation is screaming and Marketo seems to be the perfect scapegoat.This can only be a Marketo bug or a smart list error. The smart list is made of 2 "member of smart list" filters, the first one defining the target and the second one with a NOT IN defining the exclusion.The most likely error being a "Use any" rule instead of a "Use All".What we discovered is that the audit trail is of no help because the potential changes in the rule does not show in the audit trail. This is what it shows:while the previous one one the same asset was:Impossible to know what was changed... And waiting for a support answer, hoping that they will be able to tell us more.-GregLouiza Verykiou​ Christina Fuentealba​

Hi Team,I want to implement JUNIT for AEM WCMUse component classes and sling servlets.Please let me know how to implement junit and how to run it.Any links or suggestions will be helpful.ThanksPreetham K.R

Is it possible to set up the HTML Message in the Email Admin section to point to an external unsubscribe page? We built an unsubscribe preference center in our CMS and we would like to point to that and have that be the URL that shows up in the footer for all email templates. Is this possible or does it have to be a Marketo landing page?I've been trying to follow this documentation: Edit the Unsubscribe Message - Marketo Docs - Product Documentation  and it doesn't say anything about it having to be a Marketo URL, but a lot of articles in the community seem to make it sound that way. Thanks! Courtney

On our website we have added a clientlib to deal with cookies on our page, and our requirement was to put it on the <head> of the page so it can block cookies creation unless the user allow cookies. To do this, we placed it above the granite libraries:<head><script type="text/javascript" src="//external-resource.com/x.x.x/etc/designs/projectux/clientlib/cookie.js"></script><script type="text/javascript" src="/etc.clientlibs/clientlibs/granite/jquery.min.js"></script><script type="text/javascript" src="/etc.clientlibs/clientlibs/granite/utils.min.js"></script><script type="text/javascript" src="/etc.clientlibs/clientlibs/granite/jquery/granite.min.js"></script><script type="text/javascript" src="/etc.clientlibs/foundation/clientlibs/jquery.min.js"></script>...</head>We place our library on an external resource (other server). When we did this, we have found an issue with granite in which somehow granite utils

I am looking to get some clarity on how a unique visit (unique visitor ID) is recorded then tied to eVars after. The scenario I am confused about is on mobile app launch that is when unique id is generated. If I look at a report for a particular eVar I see the number of unique visitors totaled as “unspecified” for the eVar as it is not specified on launch, along with the list of values for the eVar recorded during each user unique visit.For example,eVar                Unique VisitorsUnspecified.              30value A.                      15value B.                       7value C.                       12This eVar can be set multiple times during a unique visit so I get that the count shouldn't add up but is it valid that we see the unspecified and is the only proper way to remove from view is to filter from report?  Also is there a way to display the visit id in a report?

I want to track the clicks on list item appearing in the drop down as well as want to populate the option that is being clicked1.    I am picking the class through TAG selector but its not working.Please suggest !

Hi guys!I have a component whose rendering comes from a JSP script. In Sightly I show the component placeholder with this code:<sly data-sly-test="${wcmmode.edit}">     <div data-emptytext="Click here to edit this component" class="cq-placeholder"></div></sly>How do I get the same for JSP?Thanks advance for the help me

We have a few Smart Campaign flows that are a few weeks long - and of course with the holidays coming up, I'd like to pause the emails for the holiday week.It was easy to set up for Nurture programs, but for individual smart campaigns not in engagement programs I can't figure out how to pause everyone in these flows. Any ideas?

Hi I am new to mobile app implementation, can i get some help on how to track Push Notification & deep links?

Hi All,How do I add dialog options (page properties) to an AEM 6.3 page template?Thank you for any advise.

Hi All, We are trying to clone our AEM publish instances.This is what we did.1. We stopped our running instance. 2. We tar zipped the crx-quickstart folder. 3. Copied folder to another server. 4. unzipped the folder into a new instance directory. 5. Deleted all the lock files (repo.lock and cache.lock). 6. After this, when we start the AEM publish instance, we get following stack trace. Not able to login to the console. Early help is appreciated. org.apache.sling.commons.log.LogManager.factory.config.125881ea-dee6-4fd7-bed0-89f8e4868166)org.osgi.service.cm.ConfigurationException: org.apache.sling.commons.log.names : Category com.adobe.acs.samples.filters already defined by configuration org.apache.sling.commons.log.LogManager.factory.config.125881ea-dee6-4fd7-bed0-89f8e4868166  at org.apache.sling.commons.log.logback.internal.config.LoggerManagedServiceFactory.updated(LoggerManagedServiceFactory.java:36)  at org.apache.felix.cm.impl.helper.ManagedServiceFactoryTracker.provideConfigurat

Hai,Is there any option to get the duration period of the exhausted leads in the Engagement Stream separately for each and every stream ?.(i.e) we need to segregate the leads in stream based on how long the leads were in the exhausted time.

We are trying to create a POC to demonstrate email campaigning using Adobe Campaign. We want to integrate Adobe Campaign with local hMailServer (local mta) both on same windows machine. Could you please let us know how to configure this in Adobe Campaign?

I am getting the below errors on AEM 6.1 author instance,  30.01.2018 07:19:52.640 *WARN* [qtp2102344124-8253] org.apache.jackrabbit.oak.spi.query.Cursors$TraversingCursor Traversed 100000 nodes with filter Filter(query=select h.[jcr:path] as [jcr:path], h.[jcr:score] as [jcr:score], h.* from [nt:base] as a inner join [nt:base] as b on ischildnode(b, a) inner join [nt:base] as c on ischildnode(c, b) inner join [nt:base] as d on ischildnode(d, c) inner join [nt:base] as e on ischildnode(e, d) inner join [nt:base] as f on ischildnode(f, e) inner join [nt:base] as g on ischildnode(g, f) inner join [nt:base] as h on ischildnode(h, g) where name(a) = 'content' and name(b) = 'mc' and name(c) = 'offer-exchange' and name(d) = 'platinum' and name(e) = 'ap' and name(f) = 'en' and name(g) = 'lifestyle' and name(h) = 'Paradisus-Los-Cabos.html' /* xpath: //content/mc/offer-exchange/platinum /ap/en/lifestyle/Paradisus-Los-Cabos.html */, path=*, property=[:localname=[content]]); consider creating an

I am having a question maybe someone can help me out on this.I have created a line graph of couple weeks visits and see the behaviour. Now I would like to see a trend line in there. I have tried to caluclate this but somehow was not able to do so. Does anyone know a solution on this.For example these are the visits of my week:5332With this information I would like to create an own trend line to see how the behaviour is going. Does anyone know a solution on that?The most important part is to get a trendline by using maybe a calculated metricI would be more than thankful!