Solved

Hi All,We are starting setup AEM 6.4,would like to know preferred acs commons and tools versions for AEM 6.4.Thanks,Kishore.

Hello everyone, everything good? I would like to ask an API-related question. I need to build an api that brings the data of a project. Is this possible? I tried to use the API Explorer but I did not find anything.

Hello!We're working on troubleshooting some regional loading issues (China) and so far it appears satelliteLib* JS files that load early are blocking due to very long download times (> 1 minute in some cases).  In order to troubleshoot, I would like to prevent ALL DTM activity on specific pages.  The plan is to only do this in staging, so it won't affect production and I do not want to go through an entire CM process to make adjustments to the site's actual codebase.Is there a way, within DTM, that I can cause it to no load anything at all on specific pages?I'm aware of the s.abort, and returning false at the tool level, but both of those solutions still load DTM and the aborts happen on the browser.  I am looking for a way to prevent the library as a whole from actually responding at all at the page level that doesn't involve the browser.As an aside, is this functionality available in Launch by chance?Thank you!-mike

Hi Everyone ,I am uploading a full processing data sources with Visitors id's and a value for couple of evars and a event. The source uploaded fine and data is pretty much visible in SC. I then made a segment out of it was able to use this segment in Adobe analytics . I want to create a Audience out of this segment which can be used in Adobe target etc which I am unable to do . Reason visible for which is that for all the data I have uploaded with visitor id's the data processing engine has not allocated any MCVID against them. Kindly help me find a correct way of doing this.

Hi There,At a high level, I'm trying to understand how Adobe Campaign Classic (v6.1.1) can connect (transfer data) to other applications over API.I have a little experience of understanding the SOAP methods and how external applications can make SOAP calls to Adobe Campaign to perform actions, but I'm wondering what's possible the other way, and what are common uses to connect Adobe Campaign with other API endpoints.Is there any high level use cases or documentation?I'm thinking the most common use case would be a client/3rd party needing a regular transfer of data from various schemas.If their application is the API end point. How could the data transfer be achieved? (Is it something that can be configured within the console, perhaps a query activity to retrieve the data and then another activity to configure the transfer over API?) And are both SOAP and REST available in such a scenario.I've done a lot of batch SFTP data exports over the years, just looking to understand what's possi

Hello,i am new to adobe campaign tool, trying to explore the possible ways to1. send POST REST request to endpoint with JSON as input2. get the response as JSON.3. parse the JSON response for usage inside campaign.i tried with GET REST request, got the response back.sample code:var http = new HttpClientRequest("http://jsonplaceholder.typicode.com/posts/1");http.method = "GET";http.execute();var resp = http.response;logInfo("Response Code"+resp.code);logInfo("Response body"+resp.body);Could you please share the sample code for POST call with jSON as input.

Hi All, wondering if anyone else has run into this scenario before.I am consistently pulling landing page performance reports to monitor and report on conversion rates.  However, included in this report are both the Landing Pages as well as the corresponding Thank You pages.  I typically have to export the report and manually remove all of the rows containing Thank You pages.I know I can manually select which pages I want to view from the setup tab, but in some cases there are over 1000 pages to sort through - not a very good use of time (easier to export all and delete rows from excel).Has anyone run into this before?  Is there a filter I can add to this report that Im missing?  Is there a way that we can tag landing pages differently from thank you pages?Thanks!@Mike Pritts​

Hi thereI have recently started using javascript within a delivery to dynamically set certain fields and prevent the need for duplicating email templates (eg delivery.label = "Label for segment 1";)I now have a desire to set options for a control cell in this way too, and was wondering if this was possible?

Hi guys,Wanted to share something I came across today. As you know, Gmail launched a new look to their inbox. I am having trouble with a button color there and thought you might be interested to see. Of course, I'm open to suggestions - my code can probably improve and that might fix the issue.So, long story short - I have a button that I would like to display with white text. It renders great in the old Gmail inbox, however, in the new version the button text is blue.OLD Gmail:NEW Gmail:Here's my code:<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="w3.org/1999/xhtml" style="width: 100%;"><head>    <style>        .activate-button {            font-size: 14px;            line-height: 23px;       &n

Premise: Say we create a lead in Marketo and don't sync it to SFDC. Next, the same lead is created on the SFDC side and synced to Marketo.Will this create a duplicate lead on the Marketo side since it doesn't have an SFDC ID?

Hi guys,I'm wondering if there is any standard integration from Adobe Campaign to Tealium.I know there is a integration from Tealium to Adobe Campaign Adobe Campaign Connector Setup Guide for AudienceS... - Tealium Learning Community and we have done that but I'm wondering  if the other way (Adobe Campaign to Tealium) is available or it should be all bespoke.Regards

Hi There,I was just inspecting the data in the nms:address table.I know that records generated with a status of quarantine are added to this table as a result of an email address hard bouncing (or soft bouncing many times).What I'm not sure about is the difference between Creation date and Update status columns.I understand that the creation date is the first time the record is added to the table (e.g. the first time that email address hard bounced).But what does the update status field indicate?How is updated? How can it be different from creation date? (in my head I thought once a record bounced and it was added to the table, it gets excludes any recipient records with matching email addresses from future email deliveries - which it is doing - so therefore it cannot bounce again to modify the record in the nms:address table).Any insight appreciated.Below is a sample of records with difference update status dates vs creation dates.

I am looking for a way to export activity's metric data with daily granularity. I have gone through the target API documentation and it does not mention anything about granularity or date range. It only has the performance report section which does not give the option to set granularity or select a date range.Please suggest, how can I use the API to get the granular data or suggest an alternate way to get the granular data. Thanks.

Hey all, I'm trying to figure out if people who were in a stream and had exhausted all content should still be seen by Marketo as exhausted if they are later added back into the EP into the same stream they were in when they were previously a member... fyi - there has been no changes to the content in the stream (and no new content added) since they were added back. I added people back in as members that weren't supposed to be removed, and although they are in the same stream they were in, they are not showing as "exhausted" when I check the exhausted column or smart list exhausted constraint. This leads me to wonder if the "exhausted" status only spawns once the cast actually goes out. I have yet to set the cast to go out again to test, as I don't want anyone getting the same email more than once by mistake.Anyone have any knowledge on this?p.s. I do already know that it's not a best practice to remove anyone from an EP, and typically have inactive streams set up for this kind thing b

Hello guys! I'm creating a typology rule to change the domain of an image in my deliveries. Currently, I have three sender addresses on the platform, because I send e-mails from three stores that are part of the commercial group.The rule for this change should be as follows: If the delivery sender address has a "test.com" domain, in HTML the src = "http://campaign80-us.adobevlab.com/res/trn/87d1c2793a6a5e62a678882993a122b2.jpg" should be changed to src = "http: //campaign80-us.test.com/res/trn/87d1c2793a6a5e62a678882993a122b2.jpg ". Does anyone have any tips for me to do this in the Adobe Campaign? Once again, thank you !!

Hi All          We created one Maven project with archetype 12 and none of our services were getting registered. Do you think there is any issue with archetype 12 ? ThanksVeena

Hi Team,Apart from solution partner videos and the online documentation.Is there any other guide for Adobe Campaign Architect Certification exam ?Thanks,Ketan Pardeshi

Hi,We are using QueryBuilder to do the search on our website.We have a list of vanitys url's stored on a property called sling:vanityPath that is a multivalued property.I want to put on the search criteria a restriction to search pages that contains some string on the vanity urls.For example:search pages that contains "en_us" on the property sling:vanityPath (that is a multivalued property).Is it posible to do something like this?I could not found anything similar on the internet, I appreciate any help.Thank you very much in advance. 

I'm trying to get the resource /libs/clientlibs/granite/jquery-ui/resources/ui-bg_glass_75_dadada_1x400.png to load on my publish AEM 6.3 instances but every time I get errors like8.05.2018 15:26:19.921 *INFO* [127.0.0.1 [1525811179908] GET /libs/clientlibs/granite/jquery-ui/resources/ui-bg_glass_75_dadada_1x400.png HTTP/1.1] org.apache.sling.engine.impl.SlingRequestProcessorImpl service: Resource /libs/clientlibs/granite/jquery-ui/resources/ui-bg_glass_75_dadada_1x400.png not foundEven If I do this:slingRequest.getResourceResolver().getResource("/libs/clientlibs/granite/jquery-ui/resources/ui-bg_glass_75_dadada_1x400.png");It always returns null. How am I supposed to be able to load jquery ui resources using the jquery ui provided from AEM?

hi ,I have created a custom schema ( Competition ) and i want to link Subscription service to this schema.The use-case is : Customer signups for a Competition and he receives an automated email upon filling the form.Currently Service / Subscription is linked to Receipt schema.do i have to extend nms:service to link Competition  schema to it ?any ideas on this would be good.RegardsShiva

How do I create an alert with the following requirements:Revenue = 0Alert checks hourlyAlert only checks on Weekdays (not Saturdays and Sundays)When I choose the Revenue metric, there are 4 choices:anomaly exceedsis above or equalsis below or equalschanges by %For anomaly exceeds, I can choose between 5 threshold options:90% threshold95% threshold99% threshold99.75% threshold99.99% thresholdThanks!

Hello, I am currently importing and reconciling a .txt file from an external source, after processing, part of the content needs to be exported again.My problem stems from the formatting, the file needs to adhere to the same format as the imported file. Which is not a problem using However when I use the above settings I lose the column headers. I have tried to modify the xml-source:saveTitle according to documentation is the attribute that declares the column header, however the format attribute:"fixed" seems to override any such tampering.Using the basic Text export which allows you to select via checkbox first line as column header is not looking like a viable option since the columns are of various widths without a uniform separator and modifying the incoming file is not possible. Any tips to work around this? I was looking into creating a file via a javascript activity in some sort of filestream but have not found anything that works. Thanks for you time./Jonas L

Hi All,My company is being migrated in due course to the marketing cloud - I set up a new account and linked it to my legacy account and got access, but, it doesn't look like our admins have fully set up everything in the new portal yet, ergo I have limited visibility, none of my reports are there etc.I'm trying to go back to the legacy version whilst the admins sort the new stuff out, but I can't find a way and it seems like I'm effectively cut off from the data and my saved/favourite reports.  Is there a way to view the legacy portal at all?ThanksD

Hi,I would like to create multi-lingual e-mail delivery, but I do not find some of the languages I need in Profile / Preferred languages drop down. Where is it possible to extend this list? Thank you in advance.Best regards,Gyorgy

We have marketing cloud visitor id  (mid)  setup on all our domains. But, what we are seeing is that a different mid gets setup for every domain.What we are noticing is that :1.   Org Id is the same in each case2.   mid is different in each.Any ideas on what we might be missing out on here!!Thanks,Deepak