Solved

Hi Guys,I was curious if anyone has successfully integrated Target with a Wordpress install? A plugin would be preferable but any advice in general would be useful. Thanks,James

Is there a way to block competitors from filling out forms and getting content? Blacklisting them will prevent them from getting emails, but it does not prevent them from filling out forms, to the best of my knowledge. Looking for suggestions and best practices, thanks.

My workflow is processing the delivery activity and than throwing an error after processing.  The error says "Invalid Column Name sSegementCode"  and seems to be due to the workflow trying to insert a field that doesn't exist into the temporary table.  Has anyone seen anything like this? I have used this workflow a number of times in both our test and production environment and never had this issue.  Any help is appreciated.Thanks

Hi,I am using the object targetData in a delivery of a workflow. If I try to see what's inside this object with the following code:document.write("<pre>" + JSON.stringify(targetData) + "</pre>");I only get part of the object, not all the keys that are available.However, the keys are perfectly available as if I show them in the way:document.write(targetData.keyName) And the interesting thing is that from that moment, and for any subsequent run, the key keyName is also shown in the JSON.stringify output that I mentioned above.So, in other words, it looks like JSON.stringify(targetData) don't return anything initially on the first run, but as you start calling the individual parts of the object, then these are available to the JSON.stringify(targetData) for subsequent runs.I have not only experienced this with JSON.stringify(targetData), but also by calling the value of the object as targetData["keyName"] . This would return undefined unless you have called before (even in a p

Hi All,We are using sling distribution agent feature for publishing user data to all publisher instances but getting below exception.Caused by: org.apache.jackrabbit.oak.api.CommitFailedException: OakConstraint0021: /home/users/a/eiTRubAYMWwDWGJVfOA6/.tokens/2017-03-07T15.26.18.287Z[[rep:Token]]: Mandatory property rep:token.key not found in a new nodeWe have requirement that once user token created in any publish instance that should be distributed to all available publish instances to keep user session active if connected to other publish instances. 

Hello everyone,maybe it is a dummy question but I couldn't found a solution until now.I have this simple Servlet:@SlingServlet(        paths={"/schafbergbahn/ticker"},        methods = "GET",        metatype=true        )public class SimpleServlet extends org.apache.sling.api.servlets.SlingAllMethodsServlet {    @Override    protected void doGet(final SlingHttpServletRequest req,            final SlingHttpServletResponse resp) throws ServletException, IOException {        resp.getOutputStream().println(                "This content is generated by the SimpleServlet - QUMA");    }}deployed in my AEM 6.2 environment and if I invoke this servlet with     http://localhost:4552/myPath/ticker/ I get a HTTP 403 Forbidden (at bottom).Does anyone know how I can solve this issue?Thanks a lot!ForbiddenCannot serve request to /myPath/ticker/ in org.apache.sling.servlets.get.DefaultGetServletRequest Progress:0 TIMER_START{Request Processing} 0 COMMENT timer_end format is {<elapsed msec>,<t

Hi everyone,I'm using Adobe Campaign Sandbox and trying to duplicate template.However, I can't change the copied template label name and brand...etc..When I clicked save, the following alert was shown. But I'm already the administrator of ACS.How could I check this problem?  Is that means we didn't have the function license in the sandbox?  Thanks.

Hi,Please answer my below AA Queries:1. What is the difference between sprops and evars.I heard a lot about like transient and permanent, etc.But I am not able to find out why we need these both.2. s.code.js is replaced by AppMeasurement.js.What is the purpose and usage of s_code.js?We put JS code on the web pages to send data to AA.Is s_code.js a part of this JS code?Is it that old AA used s.code.js and the latest AA uses AppMeasurement.js?Appreciate your responses.Thanks,Rama.

HiI am trying to include the Webex token link - {{member.webinar url:default=edit me}} - in the body of the ics calendar token as we have done before, however this is not populating correctly, and instead of a link, the token appears in the same format as above only.The same link works fine in the body of an email, and the registration (verified in Webex and via the back-up page) is correct.I have seen a similar post relating to "GoToWebinar" where the format of the token build seems to have recently changed, could this also be the case with Webex?Can anyone help by shedding any light on this issue for you?Thanks.

Hi,I want to set a rule to record who scroll down to the end of the page.How could I achieve that goal?I guess there are two methods: one is set a Direct Call rule fired at footer.The other is that I noticed that there is "focus" under Event Type, I'm wondering what's the true meaning of that.For I tested a rule like follows, and it didn't fire.thanks,ZZ

Hi everyone,I would love some advice / best practice tips on tracking multiple scores in a nurture program. I read this article: by ​ and it's really helpful and amazing. (to summarize VERY generally: multiple scores are used to track different products, eg: MacBook score, Apple Watch Score, iPhone Score, based on what the person is interested in buying.I'm attempting to do a scoring system like this but with even more.For example: There are multiple products that Apple provides: iPhone, MacBook, accessories, etc... Within each product line, there are multiple product types: iPhone 6, iPhone 7, iPhone 7+, MacBook Pro, MacBook air, etc.... Lets say we know someone is interested in an iPhone, but we don't know what type: so we track an iPhone score, later we figure out that they're most likely going to buy an iPhone 7 if they commit: so we'll have iPhone score, as well as an iPhone 7 score. By utilizing multiple scores, we'd be able to personalize the content much more. We can send this

I'd like a report that shows the IP Address and Inferred company for Anonymous leads that visit a particular web page. Web Page Activity Report and Company Web Activity Report don't seem to allow you to filter based on web page visited, and a smart list doesn't seem to allow you to select anonymous leads. Am I missing an obvious setting for one of those reports/lists that would allow me to get the results I'm looking for, or is what I'm trying to do not possible?

Hello,I would like to know which is the fastest way to know if a trait is working correctly. I dont like to wait two days to see if the trait have qualifications or just to check the traits expression.Thank you in advance!

I want to make a custom formula field to change the from address using a company attribute. However, when I look through the drop down to add a filter, I am only seeing person attributes. Is it not possible to make a rule in a custom formula field based on a company attribute?

I'm looking at  the obfuscated code from Adobe Target (At.js) . What I'm trying to pin-point is where it initially reads the response with the json structure. I started on this line (Line #4697):$p = ["/m2/", Rp, "/mbox/json"].join(As),And started to follow it back but didn't have much luck! Below is a sample response:https://bankofthewest.tt.omtrdc.net/m2/bankofthewest/mbox/json?mbox=target-global-mbox&mboxSession=0412a0c635b84e0093c135eac04005c1&mboxPC=7c97aeb8c37b4392850e231de01f27ec.28_48&mboxPage=f5e80b627b974d2e83e93b6ef187da86&mboxVersion=1.0.0&mboxCount=1&mboxTime=1503502802144&mboxHost=www.bankofthewest.com&mboxURL=https%3A%2F%2Fwww.bankofthewest.com%2F%23testdtm&mboxReferrer=&mboxXDomain=enabled&browserHeight=226&browserWidth=2304&browserTimeOffset=-420&screenHeight=864&screenWidth=1536&colorDepth=24&mboxMCGVID=14110397794388778776024950675182268582&mboxAAMB=NRX38WO0n5BH8Th-nqAG_A&mboxMCAVID=&mbox

I have a question about adding a large Javascript library to a component in AEM - specifically, Material Design. So far in my experience with AEM, I've added JS files individually to my clientlib folder, but Material Design has dozens (possibly hundreds) of JS files to control the various components in their design. (Here's their Github for reference.)I tried installing Material Design as a Node package in my clientlib folder, but I couldn't get the package to build after that. Any thoughts on how to get Material Design going in AEM?

Hi,1. Can you please recommend the steps to debug the sling model.2. If I have the method with @PostConstruct, when will it get executed ?3. If there is a constructor, when will it get executed ? ++++ EXAMPLE ++++@Model(adaptables=Resource.class)public class TestModel {    @Inject @Named("path")    private String id;    @Inject @Named("jcr:title")    private String title;    @PostConstruct    protected void init() {        LOG.info("Inside init() ");    }    @Inject    public TestModel(Resource resource) {        final String id = resource.getPath();         }}

Hello,I have two instances of AEM 6.1 and on publishing one of the specific documents from two of the servers, outputs are different. One of the PDF is correct where images are at correct locations, however from other instance PDF is not generating correctly (Images are losing placement).Is there anything in AEm which can use for comparing the instances causing this.

Hi,Is it possible to use My Tokens created in a Program in a webhook call?Would appreciate if someone can share on how this can be done.Thanks ~

On some webpages I see a link to marketo.net for the Munchkin deployment rather than normal tracking deployment as described here: Add Munchkin Tracking Code to Your Website - Marketo Docs - Product Docs  On some page the code links to:https://munchkin.marketo.net/munchkin.js https://munchkin.marketo.net/151/munchkin.js I assume the folder deployment is for a specific Munchkin version, but can someone tell why we would deploy Munchkin in this way and how it's connected back to our instance if it doesn't have a munchkin id connected to it? At the moment we seem to have multiple codes and I want to removed unneeded if they are historical.

Hello Adobe Community !I'm looking for a good reference about all the 'native' (or 'built-in', or even 'out of the box') dimensions that Adobe Analytics has - such as Cities, zip, App Id, and al.Thaks alot for the help !Cheers !Mario

When in classic UI and asset properties open for a particular asset, there is a "version" tab on the far right where I can easily enter version info that may be specific to us.  For example, a vendor makes an update to the asset and Product Marketing has deemed this new version, ver3A.  I can manually enter that data into the version tab.  While AEM may relate to that version as version 1.1, the label in the version data for that asset says ver3A so it is easily identifiable.   We really try to discourage putting the version number in the filename as any web published link to that asset then needs to be updated anytime the asset is rev'd.    Is the only way to manage version data or revert to an older one, done only with Classic UI?  We could also create/use a metadata field to track our internal version, but the question still remains if version management can only be done in Classic.Thanks,Jim P

When I try to install the IPA to an iPad from my web page, I get a dialog after almost ten minutes of "Waiting..." on the icon:Unable to Download App "App Name" could not be downloaded at this time.Reading the device log is not very helpful. After slogging through seven minutes of entries, almost 3,000 lines, the best error I can find says:Jul 19 09:08:40 PADD-mini-02 SpringBoard(FrontBoard)[49] <Error>: Applications did fail to install: (    "<LSApplicationProxy: 0x151d85a20> com.ambitenergy.ambitjapan (null) <com.ambitenergy.ambitjapan <INVALID >> {9D7B8F6A-7A5D-4AF8-862D-0B6B3002FED1 432}") (appInfos: (null))I can't figure out exactly why it's failing. But I think it might be an improperly signed IPA.When I sign the IPA with the AEM Mobile Signing Tool (release.2017.2), I use the .mobileprovision file for this app. The only options in the Certificate drop down are:- Select a certificate√ Developer ID Application: My Company (numbersandletters)- Mac Developer:

I am new to DTM and adobe analytics. I took some trainings about DTM and Adobe analytics. I am still feel pretty confuse about "could I re-use the variables". For example if I decided to assign eVar1 = productID in a property, could I use eVar1 for something else in other property?Is eVar/ prop unique in a property or report suite? If so, what's the best way to track which eVar/prop have been used for what?Also for all the eVars or Props, is there guidance which variables should use for which kind of event/ values?

Hello,does Adobe have any iOS or Android SDK to integrate the DTM within a native APP? We want to place DTM on native views.Best regards