Solved

We have a bunch of forms on our website and have a dropdown list as below:and in the backend of the form builder is as followsWe have a country selector for the website which then localizes the pages as per country (ie. en-gb, en-us)Is there anyway with the current setup to make it so the same form if on en-gb defaults the country selector as United Kingdom (however giving the user the option to change country if needed) and if on en-us to default to United StatesIs this possible?We do have gaconnectors for cookies within countries could we do something around this?Thanks

Hi Team,You can refer project here: https://sc5.omniture.com/x/5_9yvti I have a created a segment for particular campaign as shown below:I am using the above segment to filter out the campaign visits from overall visits. v81 fires only when user see the banner(campaign). Along with v81, I am firing event83 as a counter.  As in the below screen shot, row#5 has 2 visits, v81 = 0, e83= 0. How is this possible? when v81 = 0 (means v81 not fired for that particular visits) how come Segment named v81: MBA campaign is allowing that visits in the report. I think row#5 should not be present in the below table. Please help me here.

Hi - we are experiencing a huge increase in traffic from ~20 IPs, all with over 3000 visits in the past week. Our normal "direct" source hit counts are around 5k - this past week we soared over 130k. Every week I check a data warehouse report that shows me visits by IP and I block any weird ones in the bot rules. However, this is an extremely large number and I'm concerned about what is happening. Adobe support is telling me I need to set up VISTA rules but I'm not sure what is going on. Does anyone have experience with this issue or have suggestions on what could be happening?

hey guys,just one question: is there any possibility to get the percentage of the row in this case? So i mean something like "percentage of row" which is not available? in this case i need something like a click / view Ratio. so i have created two segments, where on the one hand just clicker on an advertising are counted and on the other hand just the viewer but not the clicker on an Advertising are counted. what I need now is the ratio of the clicker to the viewers, because i want to know, how many users, who have viewed an add, also clicked on that add. or do i need a calculated metric? because on this screensot i just see the percentage of the column.Thank you very much!Click-Segment:View-Segment:

Hi,I want to classify SKUs based on Number of orders placed per day. This Classification/ ranking will help our asset team to understand which SKUs are sold most in the selected time period and they can plan their stock level based on the historical purchase trend on our website. Let's take below definition for my caseDefinition (Per Day)Demand LabelOrders >= 100A90 <=Orders< 100B70 <=Orders< 90C50<=Orders< 70DOrders<50EHow can I create a report in Work space which shows demand label against SKU in Omniture as below?Product CodeDemand Label1215561A23F004ASA01504B1123951D1123435Dursboller​ Can you please help?Similar grouping I want to do based on Revenue generated as well as on Units sold.RegardsLalit

I was trying 1.4 Data warehouse API,@ was able to get the response too, but encountered one limitation like below:"error_description": "The maximum number of elements supported is 4"if I give more than 4 elements, its throwing error, is there any way to add more elements? "elements":[                                     {                                           "id" : "zip"                                    },                                    {                                           "id" : "evar8"                                    },                                     {                                           "id" : "evar6"                                    },                                     {                                           "id" : "evar77"                                    },                                    {                                           "id" : "evar37"                                    }

Hi guys. first of all, I'm a marketing manager and have no backend knowledge at all. one of our IT guy asked me that DO WE NEED TO KEEP UNIQUEID FOR CUSTOMER ANALYTICS? When we stop keeping this data as a key measure to analytic function,what potentially happens?  Thank you.     

How do we implement tracking on mobil app scrolling on long app pages? 

Is it possible in ACS to randomize responses to the same keyword and in-context linear responses based on a prior response) working via a workflow?  

Hi everyone - So I was able to successfully integrate Marketo with GoToWebinar and I've set up a landing page/form in Marketo, associated it with a specific webinar in my GoToWebinar account under Event Settings in Marketo, and I tested the form. It worked correctly and passed my data from Marketo to GoToWebinar. Now - This is where I'm getting stuck: Is there a way to create a smart list in Marketo to view those who actually attend the webinar? Does the integration pass data from GoToWebinar to Marketo? I appreciate your help!

Hi , Does Adobe Campaign support Full Outer Join ?My requirement is : We have two table A(Customer) and B(Restaurant) ,Table A has column (X coordinates  and Y coordinates ) geographic location of Customer and Table B has column ((X coordinates  and Y coordinates ) geographic location of Restaurant .I would like create 1 recordset of data from both table having the all four columns . I tried with Union but it failed , as there is no link between both tables .So we can't do it using reconciliation . Please let us know if is there any workaround for it . Please let me know if you need more detail on it . Thanks! @jonathon_wodnicki @jean-serge_biro @venu_reddy  @kapilkochar 

Hi, Is there a way to build age/gender traits based on behavioural?  If so, how do I build that in audience manager?Thanks

Getting an error in Mobile service Reporting suite

We currently use AMO but are planning to suspend in option for a different service. Will ending the AMO relationship in favor of another, similar tool (SA360 for example) disrupt the existing AMO titled metrics?  In a world with SA360 and no AMO, would we continue to see Impressions, clicks, cost in the same ‘metric’? or will a new metric need to be created?

Hi All, I am having an issue where the data is getting captured in props but not eVars and revenue is not capturing at all. Any suggestions? Regards,Kishore.

Hello everybody,I would like to understand which are the steps required to connect a Generic SMPP with ACC v7 with the assumption that we want to track not only the status of the delivery itself, but also to receive the delivery logs for each recipient contained in the target population. My questions are:- Except the configuration of the external account which are the tasks to be completed?- How may the status of the delivery be updated?- How can I technically retrieve the delivery logs? Which schema/table the logs will be stored in?- Will the indicators (sent, success, openings, clicks..) of the delivery be always equal to 0?I've already read the following docs:https://docs.adobe.com/content/help/en/campaign-classic/using/sending-messages/sending-messages-on-mobiles/sms-channel.htmlhttps://helpx.adobe.com/campaign/kb/sms-connector-protocol-and-settings.html @7024404 @jean-serge_biro @venu_reddy @kapilkochar @anita_punmiya  

 Is it possible to fetch the folder name in Access rights when we select "restrict to information found in sub-folders of ' . It is not visible when we query xtk:operator schema. Please find the screenshot for reference 

Currently we are experimenting a Jamstack approach for developing our websites with utilising headless possibliities of AEM.To achieve good scalability, we prefer developing user interfaces "outisde" AEM and will use AEM as a content store so that we can use Access, Permissions and workflows within AEM.So In our value chain AEM is our datasource (content store), We will have site structure with pages and every page will be backed by a content fragment. Every page will have a json blob that represents content for that page. For Eg; { "page" : { "header" : { "title" : "Page Title" }, "image" : { "path" : "/content/dam/test.svg" }, .... "footer" : { "copyrighttext" : "copyright to" } } } We couldnt use content fragments to define our data schema since content fragments have only a limited set of input field types which we were not able to extend and that UI wont scale with the UX.So we end up creating on content fragment for each page to stor

I am creating an email report based off of leads I'v pulled in from ZoomInfo. My question is the email numbers show that over 8k emails have been sent when only 6k Zoominfo Leads exist in my marketo database.  What am I overlooking ? 

I have a series of check boxes. See source HTML below.When the checkbox is clicked, I want Adobe Launch to capture the "id" and push into Adobe Analytics which clicked without having to wait for a pageload.I have configured a rule to capture "id" for element "input" on mouse click.However, the rule captures the 1st element "input" not the "input" which was clicked.How do you configure a rule to capture the id for a clicked checkbox?Can this be done without custom Javascript?<input type="checkbox" id="Return3year" name="performance_returnsThreeYears" class=" skitchen-menu-input" value="performance_returnsThreeYears" data-bind="checked: orders().indexOf("performance_returnsThreeYears") >= 0"><input type="checkbox" id="Return5year" name="performance_returnsFiveYears" class=" skitchen-menu-input" value="performance_returnsFiveYears" data-bind="checked: orders().indexOf("performance_returnsFiveYears") >= 0"><input type="checkbox" id="

I recently migrated to AEM 6.1. In the process I had to reinstall some of my OSGI bundles. They all worked except where I call them from AJAX.I have a servlet that I register using@SlingServlet(paths = "/bin/stores.json", methods = "POST", metatype = false)Inside my class I have the following method /////////////////////////    @Override    protected void doGet(SlingHttpServletRequest request,            SlingHttpServletResponse response) throws ServerException,            IOException {        try {            // http://localhost:4502/bin/stores.json?lat=-33.9168959&lng=18.418187&uid=1            String storeUid = request.getParameter("uid"); //////////////////////////I have checked that my osgi bundle is active onhttp://localhost:4502/system/console/bundles. When I call the followinghttp://localhost:4502/bin/stores.json?uid=44909 I get back<html> <head> <title>File not found</title> </head> <body> <p>A custom errorhandler for 404 respo

I'm new to HTML. I coded my first template in Marketo, and I'm getting an error code I'm not familiar with.Is there a good resource to learn more about HTML error codes? My specific code is "Error: Multiple Container Elements..." Ideally, someone could direct me to an article or database to search this error and learn more about what is causing it.Thanks!

I am using Angular SPA with DTM.Using custom event based rules, I am able to get all my data including pageName, v41,v42 as correct. Now inside adobe editor, i am storing pagename to s.pageName and some hard-coded value to s.server. I have verified that all my data is correctly populating using OMNIBUG tool as server,pageName, v41 and v42.Problem is coming in Omniture reporting, as server and page data are not coming through. Page-name data only showing SPA homepage in all page visits and server also coming as default from s.code and not the one i am passing from s.server. eVar/prop are all coming fine.Even if I do prop40=s.pageName/prop41=s.server, then in omniutre reporting i am seeing correct data populating in prop40/prop41 but not under Page and server. And again I cant use prop40/prop41 for pagename/server as its not a correct way to follow and PAGE-VISITS are ZERO in that case.Any help how to get data in

I have 2 use cases:1. Programmatically create copy of existing Editable Template and its policies2. Programmatically generate new Editable Template based on Template Type. Could you please suggest which APIs/classes can be used to achieve this. I looked into TemplateManager but it does not seem to be having methods to copy the templates.

We report from Omniture on a monthly basis. While doing the same this month we noticed that the data historic data is not matching with what we had reported earlier. This issue is limited to a single report suite. The segments and metrics definitions remain unchanged. I would like to know the probable reasons causing this issue.